dash bezel... new - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mtdave2 · 02-07-2004, 06:30 PM

who has the best deal on a nice new dash bezel? im prety sure my temp gauge took a dump so im going to change it. might as well change out that bezel while im at it..

i see gmc paul has tge -69-72 chrome edge for 50 bucks,

**jamie72** · 02-07-2004, 08:05 PM

look on e-bay, the last one i bought cost about 30.00.

Longhorn Man · 02-07-2004, 09:01 PM

Rick's has it for 25 bucks. I have bought 4 or so and they are very close to 100% perfect.

MOTHERTRUCKERS · 02-08-2004, 10:00 AM

We sell made in USA dash bezels.

nu2-72 · 02-08-2004, 01:49 PM

I would also like to know something on this. I received a new bezel with my tach dash. The original GM has about 6 small strips of 1/4" rubber cushions between the bezel and lens. These would not fit into the new bezel. If I used them, the lens sat 1/4" away from the bezel. The bezel was not formed deep enough around the lower gauges.
Who makes the correct bezel to use these pieces without modification?

Longhorn Man · 02-08-2004, 05:02 PM

nu2-72, who did you get your bezel from?

nu2-72 · 02-08-2004, 07:35 PM

Good question. Came with the dash.
Dash came from an individual. ( Knew you would ask that next.)

MOTHERTRUCKERS · 02-08-2004, 08:06 PM

Ours are correct not Taiwan ill fitting junk.

03glide · 02-08-2004, 08:17 PM

MOTHERTRUCKERS. What is the price of your black and chrome bezel?

MOTHERTRUCKERS · 02-08-2004, 09:45 PM

Its in our online catalog in the Interior Section.

mtdave2 · 02-09-2004, 01:21 AM

are all these the same quality? strange how there could be a $25 differance. i need a very good one, 100% as the oem

MOTHERTRUCKERS · 02-09-2004, 09:02 AM

We have installed ours in our customers trucks with no problems. I think the 100% money back including shipping speaks for the quality of them.

J.Lance · 02-09-2004, 02:15 PM

I'm going to back up MOTHERTRUCKERS on this one. Buy made in the USA. I usually spend about $60 and it is worth it. Just keep in mind you get what you pay for! Problem with ebay is a lot of times the seller doesn't specify. Dealers can get the Taiwan versions for about $15 so they're happy to sell for $30!

MOTHERTRUCKERS · 02-09-2004, 11:00 PM

We wre approched by a company to sell their bezels and they sent 2 to try out, I could not get them to fit at all, 1 screw hole was way off.

william 70 c/20 · 02-09-2004, 11:15 PM

e-bay bezels are junk.....

junkyardjohn · 02-09-2004, 11:23 PM

Quote:

Originally posted by Longhorn Man
Rick's has it for 25 bucks. I have bought 4 or so and they are very close to 100% perfect.

I'LL GO ALONG WITH ANDY ON THIS ONE , ABOUT THE BEZELS FROM **************** BEING VERY VERY CLOSE TO 100% PERFECT.

JOHN

krazy_texan · 02-10-2004, 02:53 AM

why is the 67-68 instrument bezel more than the 69-72. i dont like that i wish i could get one for my truck for $25

Lukeinferno · 02-10-2004, 08:04 PM

The 67-68 dash instruments set up had 2 knobs on the left. The 69-72 had more options for gauges and had only 2 knobs all together.

krazy_texan · 02-10-2004, 11:59 PM

i know i am just joking about that i do think it is odd though that you have to pay $20 extra for an extra hole because all the gauge bezels are interchangable.

02-07-2004, 06:30 PM	#1
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	dash bezel... new who has the best deal on a nice new dash bezel? im prety sure my temp gauge took a dump so im going to change it. might as well change out that bezel while im at it.. i see gmc paul has tge -69-72 chrome edge for 50 bucks, __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

02-07-2004, 08:05 PM	#2
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	look on e-bay, the last one i bought cost about 30.00. __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

02-08-2004, 10:00 AM	#4
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	We sell made in USA dash bezels. __________________ Rest in Peace Ed. Thanks for all the good times.

02-08-2004, 01:49 PM	#5
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	I would also like to know something on this. I received a new bezel with my tach dash. The original GM has about 6 small strips of 1/4" rubber cushions between the bezel and lens. These would not fit into the new bezel. If I used them, the lens sat 1/4" away from the bezel. The bezel was not formed deep enough around the lower gauges. Who makes the correct bezel to use these pieces without modification? __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

02-08-2004, 07:35 PM	#7
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Good question. Came with the dash. Dash came from an individual. ( Knew you would ask that next.) __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

02-07-2004, 09:01 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Rick's has it for 25 bucks. I have bought 4 or so and they are very close to 100% perfect.

02-08-2004, 05:02 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	nu2-72, who did you get your bezel from?

02-08-2004, 08:06 PM	#8
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Ours are correct not Taiwan ill fitting junk. __________________ Rest in Peace Ed. Thanks for all the good times.

02-08-2004, 08:17 PM	#9
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	MOTHERTRUCKERS. What is the price of your black and chrome bezel?

02-08-2004, 09:45 PM	#10
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Its in our online catalog in the Interior Section. __________________ Rest in Peace Ed. Thanks for all the good times.

02-09-2004, 01:21 AM	#11
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	are all these the same quality? strange how there could be a $25 differance. i need a very good one, 100% as the oem __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

02-09-2004, 09:02 AM	#12
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	We have installed ours in our customers trucks with no problems. I think the 100% money back including shipping speaks for the quality of them. __________________ Rest in Peace Ed. Thanks for all the good times.

02-09-2004, 02:15 PM	#13
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	bezel I'm going to back up MOTHERTRUCKERS on this one. Buy made in the USA. I usually spend about $60 and it is worth it. Just keep in mind you get what you pay for! Problem with ebay is a lot of times the seller doesn't specify. Dealers can get the Taiwan versions for about $15 so they're happy to sell for $30! __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

02-09-2004, 11:00 PM	#14
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	We wre approched by a company to sell their bezels and they sent 2 to try out, I could not get them to fit at all, 1 screw hole was way off. __________________ Rest in Peace Ed. Thanks for all the good times.

02-09-2004, 11:15 PM	#15
william 70 c/20 Registered User Join Date: Jan 2004 Location: LV,NV Posts: 169	e-bay bezels are junk.....



Register or Log In To remove these advertisements.

02-10-2004, 02:53 AM	#17
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	why is the 67-68 instrument bezel more than the 69-72. i dont like that i wish i could get one for my truck for $25 __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

02-10-2004, 08:04 PM	#18
Lukeinferno Registered User Join Date: Feb 2004 Location: Texas Posts: 6	The 67-68 dash instruments set up had 2 knobs on the left. The 69-72 had more options for gauges and had only 2 knobs all together. __________________ I'm in love with my sweet sweet 72! -1972 Cheyenne Super (In resto progress)

02-10-2004, 11:59 PM	#19
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	i know i am just joking about that i do think it is odd though that you have to pay $20 extra for an extra hole because all the gauge bezels are interchangable. __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.