help installing kickdown cable - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fryeguy2 · 02-15-2004, 01:56 PM

Im replacing the kickdown cable on my turbo 350 tranny and it looks like its gonna be a pain. Is there any trick to getting that little hook that it attaches to in the tranny out of the old cable and back into the new, and is a bunch of fluid gonna run out when i remove the old one?

Gordo · 02-15-2004, 01:58 PM

Drop the pan.

Longhorn Man · 02-15-2004, 02:00 PM

Drop the pan and you'll be abble to hook it up no problem. May as well get a tranny filter kit while you're in there.
You can hook it from the hole it goes into, but you'll be under there for a few hrs and you'll invent new cuss words.

Glen · 02-15-2004, 08:38 PM

pull the cable housing from the tranny, then pull the housing up on the cable exposing the inner cable and then pull the inner cable ......the small wire arm will come up out of the tranny hole exposing itslef, you can take a small pair of needle nose pliers, hold the wire and remove your old cable, install new cable.

If you dont drain it, you will get a large amount of fluid on the floor. when you pull the cable housing.

02-15-2004, 01:56 PM	#1
fryeguy2 Registered User Join Date: Jan 2001 Location: Woodland, CA, United States Posts: 105	help installing kickdown cable Im replacing the kickdown cable on my turbo 350 tranny and it looks like its gonna be a pain. Is there any trick to getting that little hook that it attaches to in the tranny out of the old cable and back into the new, and is a bunch of fluid gonna run out when i remove the old one? __________________ 3/4 ton 71 GMC 383 Stroker

02-15-2004, 01:58 PM	#2
Gordo Registered User Join Date: Jan 2001 Location: Killingworth, CT. USA Posts: 3,378	Drop the pan. __________________ 1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-15-2004, 02:00 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Drop the pan and you'll be abble to hook it up no problem. May as well get a tranny filter kit while you're in there. You can hook it from the hole it goes into, but you'll be under there for a few hrs and you'll invent new cuss words.

02-15-2004, 08:38 PM	#4
Glen Registered User Join Date: Jan 2003 Location: Chandler, AZ Posts: 189	pull the cable housing from the tranny, then pull the housing up on the cable exposing the inner cable and then pull the inner cable ......the small wire arm will come up out of the tranny hole exposing itslef, you can take a small pair of needle nose pliers, hold the wire and remove your old cable, install new cable. If you dont drain it, you will get a large amount of fluid on the floor. when you pull the cable housing.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.