I have some more parts for sale................ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bamm · 02-18-2004, 07:16 PM

My brother and me cleaned out his shop this weekend and came up with some extra parts. I will be posting pics, but it only allows one at a time so please bear with me. And PLEASE Respond here so that I can keep requests in order Thanks, ......Jerry

Heres what we have:

1. A Mr Gasket carb adapter. Simple, basic. $5 +
shipping.

2. I have 3 camaro glove boxes. They are made by
Repops. I have 2 for a '69 camaro without A/C. I have
1 for a '67-8 Camaro with A/C. $10 each plus shipping.

3. I have a set of '69 Chevelle rear coil springs that
were only run for a short time. The coating is still
in very good shape. $30.00 plus shipping.

4. I have a used chrome flex fan. I personally hate
flex fans, but don't want to see anyone elses engine
deprived of more chrome. $15 + shipping

5. Also have a chrome pulley. Looks like a crank
pulley for a small block chevy, but i'm not sure, I
didn't pull it off. I can take any measurements that
anyone would need. Chrome is still in good shape on
this, with just a few light scuffs. $10 + shipping

6. A set of small block motor mounts for our trucks.
They have been beadblasted and primered. $20.00 +
shipping.

7. A pair of radiator hold downs. Rubber is still in
good shape, just need a little paint. $ 10 + shipping

8. A pair of rear armrests?? out of a suburban??
maybe??? Check out the picture. I have no idea if this
is something anyone would want or not, just thought I
would take a pic and throw it out there. One has a
little tear around the built in ashtray.

9. One (1) Drivers side new door handle. No, I don't
have the other one and I don't know where it went. $10
+ shipping.

10. I have a pair of new Lumina emblems. Yes, Lumina.
Hopefully someone can use them.?.?.? $ 10.00 +
shipping.

11. An assortment of Lenses and Gaskets. Various ones,
what you see is what I have. $10+ shipping for them
all.

12. I have an assortment of emblems. The Custom 20
emblems are in very nice shape. I will take $ 15 +
shipping for the lot.

13. I have a pair of small Legacy speakers. (Kick
panel or door size for those of you that cut) I can
get the part #'s if needed. $10 + shipping

14. And lastly, I have half of a pair of green seat
belts. No I don't have the other half. These are in
good shape, none of the plastics broken, and the
locking mechanisms move good and don't stick. $15 +
shipping.

Thanks, ......Jerry

Bamm · 02-18-2004, 07:16 PM

Chevelle Springs

Bamm · 02-18-2004, 07:17 PM

Chrome Flex Fan

Bamm · 02-18-2004, 07:18 PM

Chrome Pulley

Bamm · 02-18-2004, 07:18 PM

Assorted Emblems

Bamm · 02-18-2004, 07:19 PM

Green seatbelts

Bamm · 02-18-2004, 07:19 PM

Legacy Speakers I can email additional info to anyone interested......

Bamm · 02-18-2004, 07:20 PM

Light & Lense assortment. This is all I have..........

Bamm · 02-18-2004, 07:21 PM

Lumina Emblems new in package....

Bamm · 02-18-2004, 07:21 PM

Small Block Motor Mounts - ready for your paint!!!

Bamm · 02-18-2004, 07:22 PM

Carb Adapter

Bamm · 02-18-2004, 07:23 PM

New Drivers Side door handle- Never installed and no, I don't have the other side.....

Bamm · 02-18-2004, 07:23 PM

Radiator Hold downs

Bamm · 02-18-2004, 07:24 PM

Rear armrests???

Bamm · 02-18-2004, 07:25 PM

Thats all for now, Thanks, ...........Jerry

hchconst1@aol.com · 02-18-2004, 08:50 PM

Will take the DS door handle, shipping to zip 08015.
Thanks,
Harry

mkmiller1 · 02-18-2004, 09:00 PM

How much for the armrests with shipping to 71770?
Matthew

Bamm · 02-18-2004, 10:37 PM

Harry, pm sent. Thanks, ......Jerry

Bamm · 02-18-2004, 10:38 PM

Matthew, pm sent. Thanks,..........Jerry

69c10stepside · 02-19-2004, 12:19 AM

How much is the shipping going to be on the assorted emblems to 72611?

Thanks,
frank

7T1BURB · 02-19-2004, 12:34 AM

Just sent you a PM !

7T1BURB

Bamm · 02-19-2004, 12:41 AM

Frank, pm sent. Thanks, .....Jerry

Bamm · 02-19-2004, 12:42 AM

7T1Burb, pm sent. You'll be second in line for the armrests. Thanks, .......Jerry

FirstGen · 02-19-2004, 02:03 AM

Are the radiator supports for the top or bottom? I need whatever holds the top I just have some zip ties on there NOT GOOD! Shipping to 75070

Bamm · 02-19-2004, 12:30 PM

So far the armrests, hold downs, door handle are spoken for. Thanks, .......Jerry

02-18-2004, 07:16 PM	#1
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I have some more parts for sale................ My brother and me cleaned out his shop this weekend and came up with some extra parts. I will be posting pics, but it only allows one at a time so please bear with me. And PLEASE Respond here so that I can keep requests in order Thanks, ......Jerry Heres what we have: 1. A Mr Gasket carb adapter. Simple, basic. $5 + shipping. 2. I have 3 camaro glove boxes. They are made by Repops. I have 2 for a '69 camaro without A/C. I have 1 for a '67-8 Camaro with A/C. $10 each plus shipping. 3. I have a set of '69 Chevelle rear coil springs that were only run for a short time. The coating is still in very good shape. $30.00 plus shipping. 4. I have a used chrome flex fan. I personally hate flex fans, but don't want to see anyone elses engine deprived of more chrome. $15 + shipping 5. Also have a chrome pulley. Looks like a crank pulley for a small block chevy, but i'm not sure, I didn't pull it off. I can take any measurements that anyone would need. Chrome is still in good shape on this, with just a few light scuffs. $10 + shipping 6. A set of small block motor mounts for our trucks. They have been beadblasted and primered. $20.00 + shipping. 7. A pair of radiator hold downs. Rubber is still in good shape, just need a little paint. $ 10 + shipping 8. A pair of rear armrests?? out of a suburban?? maybe??? Check out the picture. I have no idea if this is something anyone would want or not, just thought I would take a pic and throw it out there. One has a little tear around the built in ashtray. 9. One (1) Drivers side new door handle. No, I don't have the other one and I don't know where it went. $10 + shipping. 10. I have a pair of new Lumina emblems. Yes, Lumina. Hopefully someone can use them.?.?.? $ 10.00 + shipping. 11. An assortment of Lenses and Gaskets. Various ones, what you see is what I have. $10+ shipping for them all. 12. I have an assortment of emblems. The Custom 20 emblems are in very nice shape. I will take $ 15 + shipping for the lot. 13. I have a pair of small Legacy speakers. (Kick panel or door size for those of you that cut) I can get the part #'s if needed. $10 + shipping 14. And lastly, I have half of a pair of green seat belts. No I don't have the other half. These are in good shape, none of the plastics broken, and the locking mechanisms move good and don't stick. $15 + shipping. Thanks, ......Jerry Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 07:16 PM	#2
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Chevelle Springs Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 07:17 PM	#3
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Chrome Flex Fan Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 07:18 PM	#4
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Chrome Pulley Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 07:18 PM	#5
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Assorted Emblems Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 07:19 PM	#6
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Green seatbelts Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 07:20 PM	#8
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Light & Lense assortment. This is all I have.......... Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 07:21 PM	#9
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Lumina Emblems new in package.... Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 07:22 PM	#11
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Carb Adapter Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 07:23 PM	#12
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	New Drivers Side door handle- Never installed and no, I don't have the other side..... Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS Last edited by Bamm; 02-18-2004 at 07:26 PM.

02-18-2004, 07:23 PM	#13
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Radiator Hold downs Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 07:24 PM	#14
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Rear armrests??? Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 07:25 PM	#15
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Thats all for now, Thanks, ...........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 08:50 PM	#16
hchconst1@aol.com Registered User Join Date: May 2000 Location: Browns Mills, NJ USA Posts: 101	parts Will take the DS door handle, shipping to zip 08015. Thanks, Harry __________________ 6T727T2

02-18-2004, 09:00 PM	#17
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	How much for the armrests with shipping to 71770? Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles



Register or Log In To remove these advertisements.

02-18-2004, 10:37 PM	#18
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Harry, pm sent. Thanks, ......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 10:38 PM	#19
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Matthew, pm sent. Thanks,..........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-19-2004, 12:19 AM	#20
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	How much is the shipping going to be on the assorted emblems to 72611? Thanks, frank __________________ 1989 GMC C1500 ECSB 1972 Gmc Jimmy 1972 Chevy C10 SWB Sold

02-19-2004, 12:34 AM	#21
7T1BURB Registered User Join Date: Aug 2002 Location: Newport News, VA Posts: 190	Just sent you a PM ! 7T1BURB

02-19-2004, 12:41 AM	#22
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Frank, pm sent. Thanks, .....Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-19-2004, 12:42 AM	#23
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	7T1Burb, pm sent. You'll be second in line for the armrests. Thanks, .......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-19-2004, 02:03 AM	#24
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Are the radiator supports for the top or bottom? I need whatever holds the top I just have some zip ties on there NOT GOOD! Shipping to 75070 __________________ 1968 C10 build in process TT LSA/6L90e/9"

02-19-2004, 12:30 PM	#25
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	So far the armrests, hold downs, door handle are spoken for. Thanks, .......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.