Getting on the Roof of the Burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 Suburban · 03-01-2004, 02:15 PM

I am prepping my truck for paint. I need to do a little sanding and prep work on the roof of the burb. Any ideas oh how to do this. I am 6'3", but I am obviously to short to do it from the ground. A step ladder seems like it would put me to far away from the roof. Is it safe to actually get up on the roof? Anyone ever do this? Thanks

JimKshortstep4x4 · 03-01-2004, 02:51 PM

You will probably dent your roof. I would suggest a table or scaffolding. The roofs are very large and you may want to recruit
some help as it will take a while to prep. We used a stripping wheel to take the paint off as we were afraid sand blasting would damage the roof.

Good luck!

Jim

Jim68 · 03-01-2004, 02:59 PM

aww but the old faded gold paint looks soo cool on there!!!

**John Fabris** · 03-01-2004, 04:45 PM

Get yourself a pair of benches from a normal picnic table set, and set them along side of the burb. That way, you have something stable, and you have 4-6 feet of walking space so you can spend more time sanding instead of reaching or up and down a ladder.

03-01-2004, 02:15 PM	#1
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Getting on the Roof of the Burb I am prepping my truck for paint. I need to do a little sanding and prep work on the roof of the burb. Any ideas oh how to do this. I am 6'3", but I am obviously to short to do it from the ground. A step ladder seems like it would put me to far away from the roof. Is it safe to actually get up on the roof? Anyone ever do this? Thanks __________________ Just sitting here contemplating contemplation.

03-01-2004, 02:59 PM	#3
Jim68 Registered User Join Date: Apr 2000 Location: Mesa, AZ Posts: 135	aww but the old faded gold paint looks soo cool on there!!! __________________ 68 long fleetside C-10, '74 350, CH465 4-speed, Edelbrock Performer 1406 Carb, Hedman Hedders, 50 Series Flowmasters Mesa, AZ

03-01-2004, 04:45 PM	#4
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Get yourself a pair of benches from a normal picnic table set, and set them along side of the burb. That way, you have something stable, and you have 4-6 feet of walking space so you can spend more time sanding instead of reaching or up and down a ladder. __________________ John Fabris 67 C10 SWB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-01-2004, 02:51 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	You will probably dent your roof. I would suggest a table or scaffolding. The roofs are very large and you may want to recruit some help as it will take a while to prep. We used a stripping wheel to take the paint off as we were afraid sand blasting would damage the roof. Good luck! Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.