Maybe a stupid question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gibble · 03-01-2004, 04:59 PM

Is it possible to convert a C10 to a four by four?

Russell · 03-01-2004, 05:14 PM

If I were to do this, I would buy a rolling 4x4 frame and bolt my truck's body / engine to the frame's tranny / transfercase. It would by far be the easiest way to go about it, even though I'm sure there is some sort of conversion kit somewhere...

Gibble · 03-01-2004, 05:18 PM

I figured getting a rolling 4x4 frame would be easiest.

I ask because I'm going to be swapping my engine tranny for a Olds 425/TH400 ... and I'd much rather have a 4x4 than a peg leg

Prerunner1982 · 03-01-2004, 05:21 PM

you can, ask 1fastc10 i think he is doing it. it can be done, but like russell said, rolling chasis would be best. i have thought about it, but dont have the time, money or space to do it at the moment.

Gibble · 03-01-2004, 05:22 PM

Would I need to use the tranny from the rolling chassis or would the TH400 work? I'm pretty ignorant of how 4x4's are setup.

CRRoy71 · 03-01-2004, 07:34 PM

The TH400 would work as long as it came out of a 4X4. If it came out of a 2X4, the tail shaft would need to be changed, as they are different between a 2 wheel drive and a 4X4.

Gibble · 03-02-2004, 12:48 PM

The more I think about it, the more I think I should maybe just change my rear diff and keep it a 2wd.

And build a seperate 4x4

Nonetheless, Thanks for the help!

Prerunner1982 · 03-02-2004, 01:26 PM

just do like me, build a capable 2by....

Gibble · 03-02-2004, 01:48 PM

What did you do?

Prerunner1982 · 03-02-2004, 02:14 PM

pretty much a well equiped truck (ex. tools, spare parts, chains, fire extinguisher, shovels..etc..) with large tires (32" at the moment, maybe 35"s with cut fenders) re-geared axle with locker at some point.... i also have full size spare, with cb, want a Ham radio as well....

Gibble · 03-02-2004, 02:16 PM

I guess it's different when you want traction on ice...my parents 2wd couldn't pull my cavy out of a ditch (only ONE wheel was actually in the ditch!), the wheels just spun, got a 4wd and it yanked it out like a hot knife through butter.

Prerunner1982 · 03-02-2004, 03:21 PM

maybe it was the driver..

jk. mine doesnt have a problem at all, never has.. and here in Oklahoma it usually ices more than it snows..

Gibble · 03-02-2004, 03:51 PM

It may have been the tires and the fact it had NO weight in the back...

03-01-2004, 04:59 PM	#1
Gibble mmmm....Rye and Coke Join Date: Apr 2003 Location: MB, Canada Posts: 485	Maybe a stupid question... Is it possible to convert a C10 to a four by four?

03-01-2004, 05:14 PM	#2
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	If I were to do this, I would buy a rolling 4x4 frame and bolt my truck's body / engine to the frame's tranny / transfercase. It would by far be the easiest way to go about it, even though I'm sure there is some sort of conversion kit somewhere... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

03-01-2004, 05:21 PM	#4
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	you can, ask 1fastc10 i think he is doing it. it can be done, but like russell said, rolling chasis would be best. i have thought about it, but dont have the time, money or space to do it at the moment. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

03-01-2004, 07:34 PM	#6
CRRoy71 Registered User Join Date: Feb 2003 Location: Mont Belvieu, TX Posts: 852	The TH400 would work as long as it came out of a 4X4. If it came out of a 2X4, the tail shaft would need to be changed, as they are different between a 2 wheel drive and a 4X4. __________________ Chris '92 ext. cab s/b 4.3L "Sparky" '04 crew cab 2500 4x4 6.0L

03-02-2004, 01:26 PM	#8
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	just do like me, build a capable 2by.... __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

03-01-2004, 05:18 PM	#3
Gibble mmmm....Rye and Coke Join Date: Apr 2003 Location: MB, Canada Posts: 485	I figured getting a rolling 4x4 frame would be easiest. I ask because I'm going to be swapping my engine tranny for a Olds 425/TH400 ... and I'd much rather have a 4x4 than a peg leg

03-01-2004, 05:22 PM	#5
Gibble mmmm....Rye and Coke Join Date: Apr 2003 Location: MB, Canada Posts: 485	Would I need to use the tranny from the rolling chassis or would the TH400 work? I'm pretty ignorant of how 4x4's are setup.

03-02-2004, 12:48 PM	#7
Gibble mmmm....Rye and Coke Join Date: Apr 2003 Location: MB, Canada Posts: 485	The more I think about it, the more I think I should maybe just change my rear diff and keep it a 2wd. And build a seperate 4x4 Nonetheless, Thanks for the help!

03-02-2004, 01:48 PM	#9
Gibble mmmm....Rye and Coke Join Date: Apr 2003 Location: MB, Canada Posts: 485	What did you do?

03-02-2004, 02:14 PM	#10
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	pretty much a well equiped truck (ex. tools, spare parts, chains, fire extinguisher, shovels..etc..) with large tires (32" at the moment, maybe 35"s with cut fenders) re-geared axle with locker at some point.... i also have full size spare, with cb, want a Ham radio as well.... __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

03-02-2004, 02:16 PM	#11
Gibble mmmm....Rye and Coke Join Date: Apr 2003 Location: MB, Canada Posts: 485	I guess it's different when you want traction on ice...my parents 2wd couldn't pull my cavy out of a ditch (only ONE wheel was actually in the ditch!), the wheels just spun, got a 4wd and it yanked it out like a hot knife through butter.

03-02-2004, 03:21 PM	#12
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	maybe it was the driver.. jk. mine doesnt have a problem at all, never has.. and here in Oklahoma it usually ices more than it snows.. Last edited by Prerunner1982; 03-02-2004 at 03:28 PM.

03-02-2004, 03:51 PM	#13
Gibble mmmm....Rye and Coke Join Date: Apr 2003 Location: MB, Canada Posts: 485	It may have been the tires and the fact it had NO weight in the back...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.