What did you get done this weekend - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 03-15-2004, 12:56 AM

I got a lot done on sunday here are a few pic's....
Got my tranny x-member painted and installed..

**72afr** · 03-15-2004, 12:58 AM

got my truck lowered

FRENCHBLUE72 · 03-15-2004, 01:00 AM

All mirrior hole's got welded up and the door's got gutted for the 1-piece window kit ....

FRENCHBLUE72 · 03-15-2004, 01:03 AM

Steak hole's went on vacation...

skokie · 03-15-2004, 01:05 AM

Cleaned up the 307 rearend and adjusted the carb and the timing. Also put in a new vacumn line to the tranny modulator and cleaned up the inside a bit.

Joey-D · 03-15-2004, 01:06 AM

I shaved the firewalls heater box and patched some rust on the firewall. Also I removed the dash and discover the biggest nightmare yet, the footwell to the windshield on both side rusted completely through. Started to remove that. I will clean up and por15 what I can save mostly behind that panel and then custom fab what I have to. I would just scrap this cab, but I already have some much work done on the firewall and body drop. I post some pics when I get them devoloped. Let the headaches begin.......

FRENCHBLUE72 · 03-15-2004, 01:07 AM

SMOOOTHE

1969 GMC · 03-15-2004, 01:07 AM

my truck got towed home by a Ford

FRENCHBLUE72 · 03-15-2004, 01:10 AM

I started to shave the door's but ran outta time....

Mountain Man · 03-15-2004, 01:11 AM

Finished installing my reproduction grill, waxed and polished truck, tightened loose rad hose clamp, and drove it for the first time since last winter. Put it back to sleep in the garage. It is ready to go to the auction in April.

Started shoping for my next project.

72 CustomCamper · 03-15-2004, 01:21 AM

I finally got a new freeze plug installed where one poped out over the winter and got the truck fired up...

Chuck

*Cruiser71* · 03-15-2004, 01:29 AM

Worked on my sewer line from my shop to the septic tank. I need a shower!

drink2mny · 03-15-2004, 01:30 AM

Put my 38.5's on and played

67cst · 03-15-2004, 01:31 AM

i cleaned up the bumper on the 67, the inside was all dirty and had surface rust, i got it all nice and clean then shined the chrome side, then cleaned up the mounting brackets and painted them, then stripped 3 layers of paint off the tailgate then me and my dad put the 40/60 in the cab and fabricated some brackets to mount it. it was about a 8 hour day..went good

drink2mny · 03-15-2004, 01:32 AM

2

drink2mny · 03-15-2004, 01:34 AM

3

71swb4x4 · 03-15-2004, 01:42 AM

I pulled the TPI from the Camaro and started labeling all of those wires. Was a little overwhelming at first, but things are moving along now. Intake goes through the parts washer tomorrow.

orange72350 · 03-15-2004, 02:26 AM

Fixed my noisy starter, new battery cables, fixed fender brace, ummm. fixed license plate lights, thats about it.
dale/.

shortymac83 · 03-15-2004, 03:04 AM

I had a long weekend...as in, all week. I love spring break. Anyway, here's my list from what I did last week -

Monday - Bought the truck, fiddled with it for 3 hours to get it to run, drove it home without tags. Pulled the carb, stripped it and dumped it in the soak overnight.

Tuesday - had to go to school to observe a teacher (I love education classes!), then at 4:30, went to the store to put carb together, dropped that on and ran it. sounds OK. Flushed the cooling system in my mom's 92 cherokee and did some teardown on our CJ7 project.

Wednesday - put exhaust manifold gaskets on the wee-oh-7. (that mofo of a job took me 6 hours) Was too pissed to do anything else

Thursday - more work on the CJ, finally get around to changing the oil in the C10. Smells like gas because it was flooded so many times. do a total kerosene flush and it runs smoother now that it's actually getting oil. Throw the oil filter in a lathe and cut off the end. the entire thing was COVERED in about 1/4" of grime inside and out and has silt at the bottom like you wouldn't believe.

Friday - fixed the choke on the C10, rebuilt the carb on the Delta (again...grrr), more work to the CJ.

Saturday - nothing...I slept.

Today - nothing. watched NASCAR then came back to school.

BLACK AND BLUE 67-72 · 03-15-2004, 03:13 AM

Changed my steering box out with a new one, put a new pitman arm on, put a new master cylinder on, cleaned and greased the frontend, and installed my swaybar

A.P. · 03-15-2004, 04:01 AM

Got me a sway bar from the wreckyard and cleaned it. Will install soon.

**BOSS** · 03-15-2004, 09:35 AM

Put a 454 into my bros 86 burb,got everything ready but didnt have the oil,antifreze,or tranny fluid to hear it run.Had to fad up a throttle linkage and working on the power steering bracket that cant be found......lol.We are going to start it tonight when we get in,then we just need the exhaust.Trying to get it out of the garage so i can get started on one of mine next.

TEXAS 68 · 03-15-2004, 10:24 AM

Have"t got much done lately, but did fit my power doors on the cab.

TEXAS 68 · 03-15-2004, 10:34 AM

and started on this

Effle18 · 03-15-2004, 11:07 AM

I took half a day Friday and washed the truck cause I was going to the Chevy show at Moroso on Saturday, figured I would enter in the daily driver class so it was a good time to clean the truck. Well I go home and UPS came by, I finally received my new spray in bedliner, so I preped the bed and truck and sprayed away. Then Saturday morning got up early and painted my wheel wells and kept cleaning. Went out to Moroso got in and went to register only to realise that Saturday was all specialty events, best paint, best truck etc. well I'm not best of anything so I shouldn't have even been there but I was so made the best of it by drinking heavily, and I decided not to go back Sunday for the other classes, I'll go back some other time.

03-15-2004, 12:56 AM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	What did you get done this weekend I got a lot done on sunday here are a few pic's.... Got my tranny x-member painted and installed.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-15-2004, 12:58 AM	#2
72afr Beep! Beep! Join Date: Nov 2003 Location: Rural, MO Posts: 281	got my truck lowered Attached Images __________________ 1972 Chevrolet C/10 shortbed, stepside, 350, HEI, Fire Engine Red, Black Interior, Former Army cargo transport 2003 Chevrolet 2500HD CC 6.0 4wd 2004 Jeep Rubicon some aftermarket stuff... 2019 Jeep Unlimited Rubicon (the wife's baby hauler)

03-15-2004, 01:00 AM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	All mirrior hole's got welded up and the door's got gutted for the 1-piece window kit .... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-15-2004, 01:03 AM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Steak hole's went on vacation... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-15-2004, 01:05 AM	#5
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Cleaned up the 307 rearend and adjusted the carb and the timing. Also put in a new vacumn line to the tranny modulator and cleaned up the inside a bit. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

03-15-2004, 01:06 AM	#6
Joey-D City's Articulation Ramp Join Date: Jan 2004 Location: St. Louis Missouri Posts: 452	I shaved the firewalls heater box and patched some rust on the firewall. Also I removed the dash and discover the biggest nightmare yet, the footwell to the windshield on both side rusted completely through. Started to remove that. I will clean up and por15 what I can save mostly behind that panel and then custom fab what I have to. I would just scrap this cab, but I already have some much work done on the firewall and body drop. I post some pics when I get them devoloped. Let the headaches begin....... __________________ 85 K90 SWB Rockwells 46x19.5 on double beadlocks 20" lift 305/sm465/NP208 Toy 00 Silverado 2wd SWB 4.8 auto 3/4 drop slamair bags esclade rims Daily Driver 06 Harley Sporster 883 low 19?? Zamboni, Really I own a Zamboni! "If your gonna be stupid, then you better be tough."

03-15-2004, 01:07 AM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	SMOOOTHE Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-15-2004, 01:07 AM	#8
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	my truck got towed home by a Ford __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

03-15-2004, 01:10 AM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	I started to shave the door's but ran outta time.... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-15-2004, 01:11 AM	#10
Mountain Man Registered User Join Date: Jan 2002 Location: Calgary, Alberta, Canada Posts: 451	Finished installing my reproduction grill, waxed and polished truck, tightened loose rad hose clamp, and drove it for the first time since last winter. Put it back to sleep in the garage. It is ready to go to the auction in April. Started shoping for my next project. __________________ 72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components.

03-15-2004, 01:21 AM	#11
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	I finally got a new freeze plug installed where one poped out over the winter and got the truck fired up... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

03-15-2004, 01:29 AM	#12
Cruiser71 AKA Phillip Johnson, AKA BANNED Join Date: Feb 2004 Location: Northern Calif. Posts: 193	Worked on my sewer line from my shop to the septic tank. I need a shower!

03-15-2004, 01:30 AM	#13
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Put my 38.5's on and played __________________ Support The Board

03-15-2004, 01:31 AM	#14
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	i cleaned up the bumper on the 67, the inside was all dirty and had surface rust, i got it all nice and clean then shined the chrome side, then cleaned up the mounting brackets and painted them, then stripped 3 layers of paint off the tailgate then me and my dad put the 40/60 in the cab and fabricated some brackets to mount it. it was about a 8 hour day..went good __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

03-15-2004, 01:32 AM	#15
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	2 __________________ Support The Board



Register or Log In To remove these advertisements.

03-15-2004, 01:34 AM	#16
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	3 __________________ Support The Board

03-15-2004, 01:42 AM	#17
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I pulled the TPI from the Camaro and started labeling all of those wires. Was a little overwhelming at first, but things are moving along now. Intake goes through the parts washer tomorrow. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

03-15-2004, 02:26 AM	#18
orange72350 Registered User Join Date: Jan 2003 Location: Cold, Snowy High Level, Alberta Canada Eh Posts: 394	Fixed my noisy starter, new battery cables, fixed fender brace, ummm. fixed license plate lights, thats about it. dale/. __________________ 2003 yamaha raptor. Stock, but it still hauls!!!! 2000 skiddo mxz 700. Camoplast 1.5 inch track, jaws twin pipes, b+b can, custom built and weighted clutch, wiseco piston, high comp heads. its very fast. wow. 72 c-10 longbox. Bright Orange. Brand new 350, rv cam, performer intake, qjet, headers, 2 1/2 inch exhaust into hooker areo chamber mufflers. Body work coming soon. "dont let yer mind wander, its to little to go places by itself." "Forget the herse, cause i'll never die"-ACDC Back In Black "If It's To Loud, Yer Just Too Old" "I Love Anything Fast Enough To Do Something Stupid In" "Instant idiot, just add beer!!""

03-15-2004, 03:04 AM	#19
shortymac83 hmm... Join Date: Jan 2004 Location: Culver, Indiana Posts: 1,631	I had a long weekend...as in, all week. I love spring break. Anyway, here's my list from what I did last week - Monday - Bought the truck, fiddled with it for 3 hours to get it to run, drove it home without tags. Pulled the carb, stripped it and dumped it in the soak overnight. Tuesday - had to go to school to observe a teacher (I love education classes!), then at 4:30, went to the store to put carb together, dropped that on and ran it. sounds OK. Flushed the cooling system in my mom's 92 cherokee and did some teardown on our CJ7 project. Wednesday - put exhaust manifold gaskets on the wee-oh-7. (that mofo of a job took me 6 hours) Was too pissed to do anything else Thursday - more work on the CJ, finally get around to changing the oil in the C10. Smells like gas because it was flooded so many times. do a total kerosene flush and it runs smoother now that it's actually getting oil. Throw the oil filter in a lathe and cut off the end. the entire thing was COVERED in about 1/4" of grime inside and out and has silt at the bottom like you wouldn't believe. Friday - fixed the choke on the C10, rebuilt the carb on the Delta (again...grrr), more work to the CJ. Saturday - nothing...I slept. Today - nothing. watched NASCAR then came back to school. __________________ 1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR.

03-15-2004, 03:13 AM	#20
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Changed my steering box out with a new one, put a new pitman arm on, put a new master cylinder on, cleaned and greased the frontend, and installed my swaybar __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

03-15-2004, 04:01 AM	#21
A.P. Black 72 Chevy Join Date: May 2002 Location: Los Angeles, California Posts: 662	Got me a sway bar from the wreckyard and cleaned it. Will install soon. __________________ 72 Chevy, SWB, 350engine, TH400

03-15-2004, 09:35 AM	#22
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Put a 454 into my bros 86 burb,got everything ready but didnt have the oil,antifreze,or tranny fluid to hear it run.Had to fad up a throttle linkage and working on the power steering bracket that cant be found......lol.We are going to start it tonight when we get in,then we just need the exhaust.Trying to get it out of the garage so i can get started on one of mine next. __________________ Support our site Norwood Survivor

03-15-2004, 10:24 AM	#23
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	Have"t got much done lately, but did fit my power doors on the cab. Attached Images __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.

03-15-2004, 10:34 AM	#24
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	and started on this Attached Images __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.

03-15-2004, 11:07 AM	#25
Effle18 Registered User Join Date: Jan 2004 Location: Dallas, Tx Posts: 94	I took half a day Friday and washed the truck cause I was going to the Chevy show at Moroso on Saturday, figured I would enter in the daily driver class so it was a good time to clean the truck. Well I go home and UPS came by, I finally received my new spray in bedliner, so I preped the bed and truck and sprayed away. Then Saturday morning got up early and painted my wheel wells and kept cleaning. Went out to Moroso got in and went to register only to realise that Saturday was all specialty events, best paint, best truck etc. well I'm not best of anything so I shouldn't have even been there but I was so made the best of it by drinking heavily, and I decided not to go back Sunday for the other classes, I'll go back some other time. __________________ 96 Bagged 2Door Tahoe 69 Blazer Last edited by Effle18; 03-15-2004 at 11:09 AM.

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode