Decided to put my 292 parts on e-bay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Canada20 · 04-07-2004, 05:08 PM

Kinda lame of me to post this but here's a couple of e-bay auctions;

3 groove pulley for power steering;
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT

Felpro Gasket set
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT

Greg

Canada20 · 04-07-2004, 05:16 PM

I also have;
- the tin (valve cover, pushrod cover and timing cover though I think I mangled that, and I can get the oil pan if anyone wants it)
-fan (doubt anyone wants that)
-intake and exhaust manifolds
-engine stands and mounts (won't have these out for awhile)
-HEI that needs rebuilt
-regular points ditributor with wires that looks like it's in pretty good shape

Greg

Canada20 · 04-08-2004, 12:18 PM

Canada20 · 04-09-2004, 11:20 AM

friday bump

Blue Beard · 04-09-2004, 10:40 PM

Just got a new rig with a 292 in it....will have to wait and see on the pulley...

MOTHERTRUCKERS · 04-09-2004, 11:12 PM

How much for the frame mounts when you get them out?

70-K10-292 · 04-10-2004, 11:02 AM

How is the heat riserspring and is there a heat stove on the manifold ?

Canada20 · 04-10-2004, 08:19 PM

MotherTruckers: is $50US + shipping on the mounts & stands too optimistic?

K10-292; not sure about the spring; I don't remember one but there might be something kicking around. There is a heat stove on the exhast manifold.

Hope this helps!

Greg

70-K10-292 · 04-10-2004, 09:33 PM

Care to sell the heat stove ?

Canada20 · 04-12-2004, 11:18 AM

Last day of auction bump

Greg

Canada20 · 04-12-2004, 08:17 PM

shameless last minute bump

(I'll quit whoring now

)

Greg

MOTHERTRUCKERS · 04-12-2004, 09:38 PM

Only need the stands,putting steel mounts in it.

04-07-2004, 05:08 PM	#1
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	Decided to put my 292 parts on e-bay Kinda lame of me to post this but here's a couple of e-bay auctions; 3 groove pulley for power steering; http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT Felpro Gasket set http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT Greg __________________ No such thing as a stupid question, right? Last edited by Canada20; 04-07-2004 at 06:38 PM.

04-07-2004, 05:16 PM	#2
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	I also have; - the tin (valve cover, pushrod cover and timing cover though I think I mangled that, and I can get the oil pan if anyone wants it) -fan (doubt anyone wants that) -intake and exhaust manifolds -engine stands and mounts (won't have these out for awhile) -HEI that needs rebuilt -regular points ditributor with wires that looks like it's in pretty good shape Greg __________________ No such thing as a stupid question, right?

04-08-2004, 12:18 PM	#3
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	__________________ No such thing as a stupid question, right?

04-09-2004, 11:20 AM	#4
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	friday bump __________________ No such thing as a stupid question, right?

04-09-2004, 10:40 PM	#5
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Just got a new rig with a 292 in it....will have to wait and see on the pulley... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

04-09-2004, 11:12 PM	#6
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	How much for the frame mounts when you get them out? __________________ Rest in Peace Ed. Thanks for all the good times.

04-10-2004, 11:02 AM	#7
70-K10-292 Registered User Join Date: Apr 2000 Location: Peru,NY Posts: 183	How is the heat riserspring and is there a heat stove on the manifold ? __________________ Where Am I ? How did I get Here ? 1970 K-10 292 Longbed stepside (now a stakerack)powersteering ,Factory step bumper,Tow Hooks,Deluxe gauges Tach & Throttle, 4 speed manual 1 out of 464 made with protectoplate intact .

04-10-2004, 08:19 PM	#8
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	MotherTruckers: is $50US + shipping on the mounts & stands too optimistic? K10-292; not sure about the spring; I don't remember one but there might be something kicking around. There is a heat stove on the exhast manifold. Hope this helps! Greg __________________ No such thing as a stupid question, right?

04-10-2004, 09:33 PM	#9
70-K10-292 Registered User Join Date: Apr 2000 Location: Peru,NY Posts: 183	Care to sell the heat stove ? __________________ Where Am I ? How did I get Here ? 1970 K-10 292 Longbed stepside (now a stakerack)powersteering ,Factory step bumper,Tow Hooks,Deluxe gauges Tach & Throttle, 4 speed manual 1 out of 464 made with protectoplate intact .

04-12-2004, 11:18 AM	#10
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	Last day of auction bump Greg __________________ No such thing as a stupid question, right?

04-12-2004, 08:17 PM	#11
Canada20 Registered User Join Date: Jun 2001 Location: Calgary, Alberta, Canada Posts: 802	shameless last minute bump (I'll quit whoring now ) Greg __________________ No such thing as a stupid question, right?

04-12-2004, 09:38 PM	#12
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Only need the stands,putting steel mounts in it. __________________ Rest in Peace Ed. Thanks for all the good times.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.