dog dish caps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bucket · 04-11-2004, 01:01 PM

will dog dish caps of a 67 1/2 ton w/ 15 inch wheels fit a 67 3/4 ton w/ 16 inch wheels? my 3/4 ton has the spring tabs on the wheels for the caps.

72 CustomCamper · 04-11-2004, 04:32 PM

I doubt it. The caps for a 15 inch wheel is about 10 1/2 inches across, and the caps for a 16 or a 16 1/2 inch wheel are about 12 inches across...

Chuck

Warbones · 04-11-2004, 08:59 PM

If you want to get rid of them let me know.

Longhorn Man · 04-11-2004, 11:58 PM

Tehy will not fit...tried it once.

**PICKMUP** · 04-12-2004, 12:03 AM

The 3/4T caps look exactly the same from the front, but they have this extended lip on the back/inside to engage the clips.

I have a full set of these, now (just got two new ones from dealer last week) that are almost new/NEAR NOS. If you are building a really nice original truck and you are interested, contact me for further info.

9footfan · 04-28-2004, 11:56 PM

pickmup and longhorn man are correct. my 67 c10 is all original w/15" wheels and stock caps. my 67 c-30 all original chassis cab w/single rear wheels has the 17" wheels w/stock caps. the caps do not interchange for the reason pickmup stated. p.s. thanks for the referral longhorn man i'm having a great time!!

Longhorn Man · 04-29-2004, 12:08 AM

Glad you are liking it...I told you this place is awsome didn't I?

04-11-2004, 01:01 PM	#1
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	dog dish caps will dog dish caps of a 67 1/2 ton w/ 15 inch wheels fit a 67 3/4 ton w/ 16 inch wheels? my 3/4 ton has the spring tabs on the wheels for the caps.

04-11-2004, 04:32 PM	#2
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	I doubt it. The caps for a 15 inch wheel is about 10 1/2 inches across, and the caps for a 16 or a 16 1/2 inch wheel are about 12 inches across... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

04-11-2004, 08:59 PM	#3
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	If you want to get rid of them let me know. __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

04-12-2004, 12:03 AM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	The 3/4T caps look exactly the same from the front, but they have this extended lip on the back/inside to engage the clips. I have a full set of these, now (just got two new ones from dealer last week) that are almost new/NEAR NOS. If you are building a really nice original truck and you are interested, contact me for further info. __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 04-12-2004 at 12:09 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-11-2004, 11:58 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Tehy will not fit...tried it once.

04-28-2004, 11:56 PM	#6
9footfan get up! stand up! Join Date: Apr 2004 Location: austin,tx Posts: 345	pickmup and longhorn man are correct. my 67 c10 is all original w/15" wheels and stock caps. my 67 c-30 all original chassis cab w/single rear wheels has the 17" wheels w/stock caps. the caps do not interchange for the reason pickmup stated. p.s. thanks for the referral longhorn man i'm having a great time!!

04-29-2004, 12:08 AM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Glad you are liking it...I told you this place is awsome didn't I?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.