|
10-30-2004, 04:57 PM
|
#1 |
|
Registered User
Join Date: Jul 2004
Location: LINDEN, TN.
Posts: 260
|
what frame?
Will a 73-87 frame work with a 67 -72 bod? What will have to be changed ?
What i have is a late 70s swb 4x4 frame will it work? thanks 
|
|
|
|
10-30-2004, 05:38 PM
|
#2 |
|
Hippy
Join Date: Sep 2004
Location: kaska, pa
Posts: 95
|
If your Building a 4X4 you can do it fairly easily. The differences between these two frames is where the kickup occurs on the 67-72 the kickup is behind the cab. On the 73-87 the kickup is under the cab. It will require you to either gut the floor to get a factory stock ride height or put a lift on the cab so it will clear the frame. I'm building a 67 2wd so I'm gutting the floor. So I'll get set the ride height by channeling the body over the frame. I hope I don't screw up and find out I have a 3 in deep bed.
|
|
|
|
|
10-30-2004, 07:40 PM
|
#3 |
|
Registered User
 
Join Date: Feb 2001
Location: East Central, MO
Posts: 11,336
|
I've done it. You will need a body lift to make it work. You will also need to shorten the frame a tad to keep the wheels in the center of the openings. PM me you email addy if you need more info.
|
|
|
|
|
10-31-2004, 10:08 AM
|
#4 |
|
Registered User
Join Date: Jul 2004
Location: LINDEN, TN.
Posts: 260
|
thanks for the offer but, it was a free frame from my in-laws and i was only half heartedly interested . thanks for the info.
|
|
|
|
|
10-31-2004, 10:38 AM
|
#5 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Take the free frame, use the closed knuckle stuff...along with the disc brake stuff, and use the rest of the frame for scrap crush weight.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
