47-72 used parts f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MOTHERTRUCKERS · 11-29-2004, 08:43 PM

I'm cleaning out my used parts inventory of truck parts we have stripped off of over 90 trucks in the past 5 years. Call 1 866 755 6772 toll free or email motrucker@prodigy.net with parts you need, lots of frame parts,frames, good cabs,bed parts,dash parts,door parts,a/c parts,glass,grills,tach/air pressure gauge panels, complete a/c setups minus motor brackets, bucket seats 67-8 and 71-2, p/b brackets, good heater and a/c boxes both under dash and firewall,trim,tail lights,wiring, good used door glass and channels, a/c dashes, seat parts, tailgate parts, good heater controls, door panels, 3/4 and 1/2 ton spindles, center links, manual steering boxes,p/s steering boxes etc.

Super Duck · 11-29-2004, 08:46 PM

what do you want for a tach cluster?

Bob Moore · 11-29-2004, 08:56 PM

I'm interested in the tach/air gauge combo.

GMC71k20 · 11-29-2004, 09:17 PM

what would a complete a/c system in working order cost me?

meathead95 · 11-29-2004, 09:19 PM

i need the perimeter of the bed floor around where the wheel tub bolts to it

longnlow72 · 11-29-2004, 09:21 PM

any good door bottoms? what about the side/pillar of the door?

nu2-72 · 11-29-2004, 10:07 PM

Your profile does not allow e-mails. So, please see my sig below.

longnlow72 · 11-29-2004, 10:17 PM

get his email of his site

john@thepier · 11-29-2004, 10:19 PM

I'm in need of a cherry 67 swb fleet box ,have any?

teamharvey · 11-29-2004, 11:08 PM

I need a good to excellant 72 passenger Blazer/truck door, and both wing windows in great shape.

Thanks,
Bret

Robert1970C20rstbukt · 11-29-2004, 11:12 PM

How 'bout a red Hazard flasher knob? Or are they removable from the turn signal switch?

bestchevyfan · 11-30-2004, 08:57 AM

A Good Used Tailgate ? Thanks,buddy

Frank_Zeller · 11-30-2004, 10:22 AM

Need a nice 1971-72 center link with tie rods and selves

cheyenne10 · 11-30-2004, 11:15 AM

Just a suggestion that Ed like many others might have a hard time keeping up with posted needs. Email him direct or call his toll free number for good results (see his post). I have dealt with him before and had good dealings but he seems like a real busy guy.

nu2-72 · 11-30-2004, 12:51 PM

I understand busy. Ed requested e-mails but his profile does not allow them. I just thought he might have missed that. Trying to help him out here. May have been a simple oversight.

cheyenne10 · 11-30-2004, 12:55 PM

Looks like he edited his post. Now his website is quoted and email is shown. My best luck is over the phone. I think he runs a repair/custom shop ontop of everything else.

MOTHERTRUCKERS · 11-30-2004, 08:02 PM

Sorry guys but it's been a mess here, as i get to the parts and check them i will try to pm everybody back. Today we hauled 12 lwb rolling frames, 9 cabs and 6 swb frames to the recycler along with 600 lbs of calipers,boosters, master cylinders,alternators,starters to Advance auto parts as cores. I still have 4 small window 67 cabs and a couple of 69-71 but the 72's are all sold. I'm sorting through the small parts like radios,steering columns,pulleys,brackets,spindles,grills,rally wheels,8 lug wheels,heater and a/c parts and at least 20 sets of 47-72 bumper brackets. I'm not doing any restoration work on customer trucks this week until the shop and warehouse is clean of used parts. I have not even begun on the parts in the loft. I will try to answer emails as they come. Please be patient THANK YOU.
Ed

MOTHERTRUCKERS · 12-01-2004, 09:54 AM

WANTED small block a/c bracket that bolts to the intake manifold with 2 intake bolts. Will buy or trade parts for one.

11-29-2004, 08:43 PM	#1
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	47-72 used parts f/s I'm cleaning out my used parts inventory of truck parts we have stripped off of over 90 trucks in the past 5 years. Call 1 866 755 6772 toll free or email motrucker@prodigy.net with parts you need, lots of frame parts,frames, good cabs,bed parts,dash parts,door parts,a/c parts,glass,grills,tach/air pressure gauge panels, complete a/c setups minus motor brackets, bucket seats 67-8 and 71-2, p/b brackets, good heater and a/c boxes both under dash and firewall,trim,tail lights,wiring, good used door glass and channels, a/c dashes, seat parts, tailgate parts, good heater controls, door panels, 3/4 and 1/2 ton spindles, center links, manual steering boxes,p/s steering boxes etc. __________________ Rest in Peace Ed. Thanks for all the good times. Last edited by MOTHERTRUCKERS; 11-29-2004 at 10:31 PM.

11-29-2004, 08:46 PM	#2
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	what do you want for a tach cluster? __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

11-29-2004, 08:56 PM	#3
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Parts I'm interested in the tach/air gauge combo. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

11-29-2004, 09:19 PM	#5
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	i need the perimeter of the bed floor around where the wheel tub bolts to it __________________ 72 2wd blazer 72 swb 4x4

11-29-2004, 09:21 PM	#6
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	any good door bottoms? what about the side/pillar of the door? __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

11-29-2004, 09:17 PM	#4
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	what would a complete a/c system in working order cost me?

11-29-2004, 10:07 PM	#7
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Your profile does not allow e-mails. So, please see my sig below. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

11-29-2004, 10:17 PM	#8
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	get his email of his site __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

11-29-2004, 10:19 PM	#9
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	I'm in need of a cherry 67 swb fleet box ,have any?

11-29-2004, 11:08 PM	#10
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	I need a good to excellant 72 passenger Blazer/truck door, and both wing windows in great shape. Thanks, Bret __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

11-29-2004, 11:12 PM	#11
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	How 'bout a red Hazard flasher knob? Or are they removable from the turn signal switch? __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

11-30-2004, 08:57 AM	#12
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Parts A Good Used Tailgate ? Thanks,buddy

11-30-2004, 10:22 AM	#13
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	Need a nice 1971-72 center link with tie rods and selves __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas

11-30-2004, 11:15 AM	#14
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	contacting Ed Just a suggestion that Ed like many others might have a hard time keeping up with posted needs. Email him direct or call his toll free number for good results (see his post). I have dealt with him before and had good dealings but he seems like a real busy guy. __________________ Bob

11-30-2004, 12:51 PM	#15
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	I understand busy. Ed requested e-mails but his profile does not allow them. I just thought he might have missed that. Trying to help him out here. May have been a simple oversight. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide



Register or Log In To remove these advertisements.

11-30-2004, 12:55 PM	#16
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	edited post Looks like he edited his post. Now his website is quoted and email is shown. My best luck is over the phone. I think he runs a repair/custom shop ontop of everything else. __________________ Bob

11-30-2004, 08:02 PM	#17
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Sorry guys but it's been a mess here, as i get to the parts and check them i will try to pm everybody back. Today we hauled 12 lwb rolling frames, 9 cabs and 6 swb frames to the recycler along with 600 lbs of calipers,boosters, master cylinders,alternators,starters to Advance auto parts as cores. I still have 4 small window 67 cabs and a couple of 69-71 but the 72's are all sold. I'm sorting through the small parts like radios,steering columns,pulleys,brackets,spindles,grills,rally wheels,8 lug wheels,heater and a/c parts and at least 20 sets of 47-72 bumper brackets. I'm not doing any restoration work on customer trucks this week until the shop and warehouse is clean of used parts. I have not even begun on the parts in the loft. I will try to answer emails as they come. Please be patient THANK YOU. Ed __________________ Rest in Peace Ed. Thanks for all the good times.

12-01-2004, 09:54 AM	#18
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	WANTED small block a/c bracket that bolts to the intake manifold with 2 intake bolts. Will buy or trade parts for one. __________________ Rest in Peace Ed. Thanks for all the good times.

Register or Log In To remove these advertisements.