How Do I Use A GMC Core Support On Chevy? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67mbsc · 02-21-2005, 10:23 AM

I want to use a core support from a 67 GMC onto my 67 Chevy. How can I change the headlight buckets to the Chevy (2 headlights instead of 4)? Other than that difference, are there any others?
Thanks

67mbsc · 02-21-2005, 12:48 PM

Am I the ONLY person to ask this? Help please if you can,......THX

**VetteVet** · 02-21-2005, 01:25 PM

go here and look and don't be so impatient

http://67-72chevytrucks.com/vboard/s...t=core+support

Vettevet

67mbsc · 02-21-2005, 09:15 PM

Thanks for that thread. I do agree, growing old is RUFF!!!!! THanks

**Tim Christian** · 02-21-2005, 10:17 PM

If that GMC rad support is super nice I would be interested in trading a chevy one for it. I will be at the run for the sun show set up. Thanks Tim

Spoof · 02-21-2005, 10:20 PM

I just drilled out the spot welds on a chevy core support to swap my GMC headlight housings on to. Now I have to start drilling out the GMC spot welds. The Chev work only took about 20 minutes, so estimating another 1/2 hour for the GMC and an hour to weld up the hybrid I'm looking at about 2 hours of work.
Then it's off to the powdercoaters.

68C15 · 02-21-2005, 11:10 PM

save those GMC buckets. I may need them in the future

67mbsc · 02-21-2005, 11:48 PM

Tim Christian,
this support does have some rust in the bottom rite, just like my chevy, but my Chevy was bent, so I'm going to repair the GMC support. Thanks for the offer, though, I appreciate it.
And, YES, I will be keeping the GMC headlight buckets, I don't throw away good parts, and most of the time, I keep even the maybe not so good parts!!! It's all a matter of opinion as to what is a good part or not, depending on the frame of mind and financial state we are in at the time!!! (Cornfucious!)

02-21-2005, 10:23 AM	#1
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	How Do I Use A GMC Core Support On Chevy? I want to use a core support from a 67 GMC onto my 67 Chevy. How can I change the headlight buckets to the Chevy (2 headlights instead of 4)? Other than that difference, are there any others? Thanks

02-21-2005, 12:48 PM	#2
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Nebody???? Am I the ONLY person to ask this? Help please if you can,......THX

02-21-2005, 01:25 PM	#3
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,709	core supports go here and look and don't be so impatient http://67-72chevytrucks.com/vboard/s...t=core+support Vettevet __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

02-21-2005, 09:15 PM	#4
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Thanks Thanks for that thread. I do agree, growing old is RUFF!!!!! THanks

02-21-2005, 10:20 PM	#6
Spoof Registered User Join Date: Jul 2000 Location: Victoria,BC, Canada Posts: 1,300	I just drilled out the spot welds on a chevy core support to swap my GMC headlight housings on to. Now I have to start drilling out the GMC spot welds. The Chev work only took about 20 minutes, so estimating another 1/2 hour for the GMC and an hour to weld up the hybrid I'm looking at about 2 hours of work. Then it's off to the powdercoaters. __________________ 71 GMC 1500 LWB

02-21-2005, 10:17 PM	#5
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	If that GMC rad support is super nice I would be interested in trading a chevy one for it. I will be at the run for the sun show set up. Thanks Tim

02-21-2005, 11:10 PM	#7
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	save those GMC buckets. I may need them in the future __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

02-21-2005, 11:48 PM	#8
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Tim Christian, this support does have some rust in the bottom rite, just like my chevy, but my Chevy was bent, so I'm going to repair the GMC support. Thanks for the offer, though, I appreciate it. And, YES, I will be keeping the GMC headlight buckets, I don't throw away good parts, and most of the time, I keep even the maybe not so good parts!!! It's all a matter of opinion as to what is a good part or not, depending on the frame of mind and financial state we are in at the time!!! (Cornfucious!)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.