will '73-'87 454 brackets/pulleys work on a 67-72 big block truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bob Moore · 02-26-2005, 04:11 PM

Answers to your questions.

Yes.
Yes.
Yes.
Yes.

Sincerely yours,
Bob

I used a LWP set-up in my 67. Didn't know about the SWP when I did it in 1993. Power steering clears no problem. I don't recall if I used 68-72 pressure hose or 73. Either may work but I would try the 73. I used a fan clutch and the fan is VERY close to the radiator and is WELL inside the shroud but has not overheated in 12 years. I have had this truck on the road for 12 years since March 93 without trouble (50,000 miles).

My next project is a 67 2wd 502/4L80E and will have AC so I am going SWP on it.

Hope this helps - Bob

02-26-2005, 04:11 PM	#1
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Answers to your questions. Yes. Yes. Yes. Yes. Sincerely yours, Bob I used a LWP set-up in my 67. Didn't know about the SWP when I did it in 1993. Power steering clears no problem. I don't recall if I used 68-72 pressure hose or 73. Either may work but I would try the 73. I used a fan clutch and the fan is VERY close to the radiator and is WELL inside the shroud but has not overheated in 12 years. I have had this truck on the road for 12 years since March 93 without trouble (50,000 miles). My next project is a 67 2wd 502/4L80E and will have AC so I am going SWP on it. Hope this helps - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.