Who needs STEPSIDE fenders and bedsides? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Shane* · 03-13-2005, 09:59 PM

Did some "spring cleaning" this past weekend and thinned-out my parts stash.

1967 Driver's Side Fender WITH spare cut out.

No visible rust and no visible bondo.

If this fender had NOT had the spare cut out, it would NOT be for sale ... it would be back in the "stash." This is a NICE piece.

$200 OBO - NO SHIPPING - buyer must pick up or arrange shipping.

*Shane* · 03-13-2005, 10:12 PM

Fender No. 2

1968-72 Driver's Side fender - NO spare tire cut out.
The previous owner had tail lights mounted in the rear of the fender ... needs holes welded up. This fender has some rust around the mounting lip, but is repairable and very usable. This fender has some bondo in it in the rear.

$100 OBO - NO SHIPPING - buyer must pick up or arrange shipping.

*Shane* · 03-13-2005, 10:20 PM

Fender No. 3

1968-72 Passenger Side Fender.
This fender is rusted at the front-bottom ... where the step bolts to the fender.

I was originally planning on repairing this fender, using a patch panel made from the front of the next fender listed. This fender is definately repairable.

$75 OBO - NO SHIPPING - buyer must pick up or arrange shipping.

*Shane* · 03-13-2005, 10:26 PM

Fender No. 4

1968-72 Passenger Side Fender.

This fender has some bondo and has some pretty bad rust in the top-rear. The mounting lip also has some rust. This is the fender that I had planned on cutting up and making a patch panel for the blue fender listed above. It also has the holes from tail lights.

This fender is most likely NOT usuable as it is ... or at least I wouldn't..

$50 OBO - NO SHIPPING - buyer must pick up or arrange shipping.

*Shane* · 03-13-2005, 10:35 PM

Moving right along ....

1967-72 Steps with brackets.
These may fit earlier years ... I dunno. Anywhoo ... they are very solid and come with brackets.

As far as I know, these are NOT being reproduced at this time.

$100 OBO - Plus Shipping.

*Shane* · 03-13-2005, 10:41 PM

Now for the bedsides ....

Set No.1

1967-72 SWB Stepside Bed Sides with rear cross-brace.
The top of the bed rails have bondo in them ... previous owners attempt at "smoothing" it all out. I ground all of the bondo off of one to see what it looked like underneath ... will need to be re-bondo'd. It has some surface rust on the one that I removed the bondo.

These are very usuable/repairable.

$175 - NO SHIPPING - buyer must pick up or arrange shipping.

*Shane* · 03-13-2005, 10:46 PM

Bedsides - Set No. 2

1967-72 SWB Stepside bed sides.

Some rust on the underside of the top rail ... no visible bondo ... very usuable/repairable.

$150 - NO SHIPPING - buyer must pick up or arrange shipping.

*Shane* · 03-13-2005, 11:12 PM

The board rules say I have to post a price, but notice the OBO after each listing.

If the price isn't in your budget, let me know ... you may be surprised at the offer's that I will entertain.

I also have some other misc. parts for sale in this post.

http://67-72chevytrucks.com/vboard/s...70#post1178570

*Shane* · 03-14-2005, 11:59 AM

TTT - this board moves FAST!

arkracing · 03-14-2005, 04:19 PM

Wish they weren't in AL...

TTT for you

*Shane* · 03-15-2005, 12:15 AM

BUMP!

Come on gang ... make me an offer ... you may be surprised.

RON WOODGEARD · 03-15-2005, 03:23 AM

It's amazing,, When you need the Stepside stuff it's hard to find,, But when you have it to sell, It's worth junk metal Prices ???

Makes no sence to me....

**special-K** · 03-15-2005, 07:43 AM

The internet goes everywhere.No shipping stays local.These would have been gone by the time I saw this,if they could be shipped.Especially being in the Eastern US.

arkracing · 03-15-2005, 09:07 AM

ditto on special-k's response

*Shane* · 03-15-2005, 10:54 AM

Quote:

Originally Posted by special-K

The internet goes everywhere.No shipping stays local.These would have been gone by the time I saw this,if they could be shipped.Especially being in the Eastern US.

I don't ship parts of this nature and size because:

1.) I want the buyer to see what he is purchasing BEFORE he buys it ... that requires him to be there in person. What may be a "good part" to me may not mean the same thing to him. Opinions and repair skills vary from person to person.

2.) These parts are BIG ... too big for UPS or FedEx ...

and finally

3.) Truck freight is the quickest way to turn nice sheet metal parts into SCRAP metal parts.

P.S. I would be willing to meet someone to exchange parts within a reasonable driving distance (100-200 miles) for fuel costs ... find a commercial carrier that will ship for that kind of rate.

A few 72's · 03-15-2005, 11:16 AM

I may want to make a offer on Fender No. 3
Is there a dent above the marker light?
Is there a dent below the rear body line?
Not sure if I'm seeing a dent or something with the blue paint and the resizing of the picture.

*Shane* · 03-15-2005, 11:22 AM

Quote:

Originally Posted by A few 72's

I may want to make a offer on Fender No. 3
Is there a dent above the marker light?
Is there a dent below the rear body line?
Not sure if I'm seeing a dent or something with the blue paint and the resizing of the picture.

I will have to check that for ya ... to be quite honest with ya, I can't remember if this fender had any major dents or dings.

The fenders are stored at my dad's and it may take me a day or two to get back out that way, but I will definately check on it for ya.

If you are interested, I will sell you both Fender #3 AND Fender #4 for $100 ... as I stated in the posts, I was planning on using the lower front portion of #4 as a patch panel for #3.

Talk to me ... we can definately work something out here.

A few 72's · 03-15-2005, 04:58 PM

Let me double check the one I have, but I think the front edge is good. It's just that the tail light end is crushed, was going to cut it up for the patch.

*Shane* · 03-15-2005, 05:33 PM

Gotcha ... let me know ... I need to get this stuff out of my Dad's way. LOL!

*Shane* · 03-17-2005, 12:09 AM

Bump ...

cnshoot · 03-17-2005, 12:33 AM

sent e-mail

*Shane* · 03-19-2005, 10:37 AM

Alrightee ... one more time to the top ... I got to move this stuff fellas.

I have had pm's and email's asking how much for all of it.

$500 takes it all.

A few 72's · 03-21-2005, 12:47 PM

Going to back out on #3 for now, ttt for you.
I found a fleet side that I may use. If you don't sale as a package and the fender is not dented I may have a friend that will take it.

*Shane* · 03-21-2005, 07:56 PM

Quote:

Originally Posted by A few 72's

Going to back out on #3 for now, ttt for you.
I found a fleet side that I may use. If you don't sale as a package and the fender is not dented I may have a friend that will take it.

I still have all of it for sale. Tell your friend to make me an offer.

*Shane* · 04-04-2005, 10:55 PM

Once more to the top ... come on guys ... make me an offer on this stuff.

03-13-2005, 09:59 PM	#1
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Thinning Out the "Parts Stash!" Did some "spring cleaning" this past weekend and thinned-out my parts stash. 1967 Driver's Side Fender WITH spare cut out. No visible rust and no visible bondo. If this fender had NOT had the spare cut out, it would NOT be for sale ... it would be back in the "stash." This is a NICE piece. $200 OBO - NO SHIPPING - buyer must pick up or arrange shipping. Attached Images Last edited by Shane; 03-14-2005 at 11:57 AM.

03-13-2005, 10:12 PM	#2
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Fender No. 2 1968-72 Driver's Side fender - NO spare tire cut out. The previous owner had tail lights mounted in the rear of the fender ... needs holes welded up. This fender has some rust around the mounting lip, but is repairable and very usable. This fender has some bondo in it in the rear. $100 OBO - NO SHIPPING - buyer must pick up or arrange shipping. Attached Images Last edited by Shane; 03-14-2005 at 11:57 AM.

03-13-2005, 10:35 PM	#5
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Moving right along .... 1967-72 Steps with brackets. These may fit earlier years ... I dunno. Anywhoo ... they are very solid and come with brackets. As far as I know, these are NOT being reproduced at this time. $100 OBO - Plus Shipping. Attached Images

03-13-2005, 10:41 PM	#6
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Now for the bedsides .... Set No.1 1967-72 SWB Stepside Bed Sides with rear cross-brace. The top of the bed rails have bondo in them ... previous owners attempt at "smoothing" it all out. I ground all of the bondo off of one to see what it looked like underneath ... will need to be re-bondo'd. It has some surface rust on the one that I removed the bondo. These are very usuable/repairable. $175 - NO SHIPPING - buyer must pick up or arrange shipping. Attached Images

03-13-2005, 10:46 PM	#7
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Bedsides - Set No. 2 1967-72 SWB Stepside bed sides. Some rust on the underside of the top rail ... no visible bondo ... very usuable/repairable. $150 - NO SHIPPING - buyer must pick up or arrange shipping. Attached Images

03-13-2005, 10:20 PM	#3
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Fender No. 3 1968-72 Passenger Side Fender. This fender is rusted at the front-bottom ... where the step bolts to the fender. I was originally planning on repairing this fender, using a patch panel made from the front of the next fender listed. This fender is definately repairable. $75 OBO - NO SHIPPING - buyer must pick up or arrange shipping. Attached Images Last edited by Shane; 03-14-2005 at 12:01 PM.

03-13-2005, 10:26 PM	#4
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Fender No. 4 1968-72 Passenger Side Fender. This fender has some bondo and has some pretty bad rust in the top-rear. The mounting lip also has some rust. This is the fender that I had planned on cutting up and making a patch panel for the blue fender listed above. It also has the holes from tail lights. This fender is most likely NOT usuable as it is ... or at least I wouldn't.. $50 OBO - NO SHIPPING - buyer must pick up or arrange shipping. Attached Images

03-13-2005, 11:12 PM	#8
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	The board rules say I have to post a price, but notice the OBO after each listing. If the price isn't in your budget, let me know ... you may be surprised at the offer's that I will entertain. I also have some other misc. parts for sale in this post. http://67-72chevytrucks.com/vboard/s...70#post1178570 Last edited by Shane; 03-14-2005 at 12:02 AM.

03-14-2005, 11:59 AM	#9
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	TTT - this board moves FAST!

03-14-2005, 04:19 PM	#10
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Wish they weren't in AL... TTT for you __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

03-15-2005, 12:15 AM	#11
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	BUMP! Come on gang ... make me an offer ... you may be surprised.

03-15-2005, 03:23 AM	#12
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	It's amazing,, When you need the Stepside stuff it's hard to find,, But when you have it to sell, It's worth junk metal Prices ??? Makes no sence to me....

03-15-2005, 07:43 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	The internet goes everywhere.No shipping stays local.These would have been gone by the time I saw this,if they could be shipped.Especially being in the Eastern US. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-15-2005, 09:07 AM	#14
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	ditto on special-k's response __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

03-15-2005, 11:16 AM	#16
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	I may want to make a offer on Fender No. 3 Is there a dent above the marker light? Is there a dent below the rear body line? Not sure if I'm seeing a dent or something with the blue paint and the resizing of the picture. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s



Register or Log In To remove these advertisements.

03-15-2005, 04:58 PM	#18
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	Let me double check the one I have, but I think the front edge is good. It's just that the tail light end is crushed, was going to cut it up for the patch. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

03-15-2005, 05:33 PM	#19
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Gotcha ... let me know ... I need to get this stuff out of my Dad's way. LOL!

03-17-2005, 12:09 AM	#20
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Bump ...

03-17-2005, 12:33 AM	#21
cnshoot Registered User Join Date: Jan 2003 Location: minden Posts: 358	sent e-mail __________________ 72 cst 2wd blazer sb soon to have tilt manual 72 gmc swb fleet 2wd bb air tilt auto 93 c/3500 crew-cab dually 03 chevy suburban LT quadrasteer c/2500 4x4

03-19-2005, 10:37 AM	#22
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Alrightee ... one more time to the top ... I got to move this stuff fellas. I have had pm's and email's asking how much for all of it. $500 takes it all.

03-21-2005, 12:47 PM	#23
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	Going to back out on #3 for now, ttt for you. I found a fleet side that I may use. If you don't sale as a package and the fender is not dented I may have a friend that will take it. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

04-04-2005, 10:55 PM	#25
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Once more to the top ... come on guys ... make me an offer on this stuff.

Register or Log In To remove these advertisements.