Parting out 69 LWB GMC in Cleveland - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stevonator · 05-11-2005, 07:39 PM

Parting out 69 LWB GMC. I drove this truck into my shop in December. It is a Northern ohio truck and is simply not worth resto. All parts are fair game at best offer....there are 18 days of school left (i'm a teacher) and anything left over after the last school day goes to the scrapyard. I'll try to describe things best I can and will reply to inquiries about the condition of specific parts but due to the vast number of parts I don't have time to try to photo them all. There are not a ton of good parts.....as far as sheet metal the hood is the only part I'd call 100% solid. Some other parts would be fine if you have nothing and need something. If you are looking for something let me know.

This is a non PS/ non PB/ non AC truck

Some potential parts of interest:

3 speed trans.
glass all there and in good cond.
recoverable and usuable seat
radiator
6 lug 3.73 leaf rear
usuable and functional tailgate
Complete set of keyed alike ignition and door locks.
Original radio....unsure of operation
Front axle assembly is completely disassembled.
Leaf packs are disassembled
Steering column is functional but not a show piece.
Truck has green interior and ext. I will try to get at least A couple of general pics so general state can be seen.

Bed is good for patches only rotted pretty hard. Cab is bad. It's a truck, but it is ROUGH.

Frame has been pulled and completely unriveted. If you need a bracket or a crossmember I probably have it and it's probably already sandblasted. I also have all brand new grade 8 7/16 bolts/washers/locknuts (100 qty) that were going to replace all the rivets. First preference goes to anyone willing to pick up parts but I will ship.......In short....GET IT OUTTA MY SHOP. Email to evracer@yahoo.com or PM me.

chevyfarmer · 05-11-2005, 07:54 PM

interested in the ignition and door locks, what is the price?? thanks

Stevonator · 05-11-2005, 08:11 PM

How's $25 shipped?

**68350** · 05-11-2005, 10:18 PM

what kind of shape is the grill in?

Stevonator · 05-11-2005, 11:08 PM

Grill is fair with the exception of one kink right about in the center. It's not show worthy but it's not mangled either....I guess I'd call it farm truck condition. It's what I would call repairable. I would probably have to get you a pic to really describe it. It's good enough to keep, but if I were restoring I'd probably replace it.

*Tanker350* · 05-12-2005, 04:06 AM

what about the tailgate? GMC Stamped w/ no major rust or dents? pics?

Stevonator · 05-12-2005, 09:13 AM

Tailgate is solid and functional, But dented, slightly concaved, and rusted on bottom. Better than no gate at all and functional, but not a what I would call a resto piece. Majority of the parts of this truck I would label as "functional and better than nothing". This gal was a rusty but trusty. It is however original.

1low1967 · 05-12-2005, 11:14 AM

How are the cab mounts on the frame it self. If decent I would be interested

1971custom · 05-12-2005, 11:27 AM

how is the passenger fender

1969 GMC · 05-12-2005, 01:49 PM

How is the windshield? I am possibly interested in it and the hood. I can pick them up, too. Also, how much for both? thanks

Stevonator · 05-12-2005, 02:06 PM

The cab mounts vary in condition, I know one is rotted beyond practical repair. If I'm not mistaken the other 3 are ok. The bottom of the cab is basically gone....I'm refering to the mounts that are riveted to the frame only.

Passenger fender has some structural rust in the usual places. It is a straight fender, front cup rusted and finger sized rust hole in rear cup.

All glasses are good, hood is surface rusted, but good, solid and straight.

1969 GMC please email me as I have a couple locals coming to look at it.....that way I can let it go to the highest offer. I'll try to help you out the best I can.

Jason915 · 05-12-2005, 03:19 PM

does it have decent looking front grill eyebrow moldings w/mounting clips that mount to the front fenders? If so may I have a few picts?

Thanks

Stevonator · 05-12-2005, 05:45 PM

nope, one completely rusted one with dents.

Don Smith · 05-12-2005, 10:49 PM

Is the radio A.M. only? How does it look.

Stevonator · 05-13-2005, 12:30 AM

Radio is AM only, but is complete with knobs. Showing it's age, chrome is dull, not sure how it would clean up. Again it's still in the dash....If I get around to pulling it I'll bench test it....right now it's inop....but that's not to say the problem is in the radio.

67ChevyC10Stepside · 05-13-2005, 12:47 AM

so are you getting another truck or what? that front setup you wanted of mine is here....might be sending it to scrap or something...

Stevonator · 05-13-2005, 08:49 AM

no....I'm done....no time no place no money for it. My priorities have changed a little. Just spent a week in the hospital with a new disease that would probably keep me from getting it done anyway. My buddy is the original owner and he gets all the proceeds from the parts. If I get another it'll be already done.

1low1967 · 05-13-2005, 10:00 AM

Can you post a pic og the riveted mounts, or email me gtiracer55@hotmail.com

Thanks

Stevonator · 05-13-2005, 11:35 AM

Which ones? All?

1low1967 · 05-13-2005, 11:48 AM

Riveted cab mounts please

1low1967 · 05-13-2005, 11:49 AM

sorry ummm if you wouldn't mind all the mounts

BertMac · 05-13-2005, 02:50 PM

You said 3 speed tranny.
If its a standard
I am interested in the clutch pedals and linkage?

Stevonator · 05-13-2005, 09:09 PM

Ok, I'm keeping notes here....anything with interest here I won't scrap. However, I have a couple locals that have expressed interest in some of the big parts and I want to focus on those first. I have to have the big stuff out of the shop by June 8. The small stuff can go with me if need be. One of these locals is potentially interested in a package deal so he gets priority.....past that it'll be first come first serve for the rest. Please keep inquiring......I'd rather have the parts go to other trucks than scrapped. I'm trying to make a list of stuff NOT to throw out.

Bert, yes I have those parts.

BertMac · 05-14-2005, 10:31 AM

Just email me if you want to sell them to me.
bertmac1111@yahoo.com

Thanks
Bert

Stevonator · 05-16-2005, 04:06 PM

Anyone else got a need for something? I'd prefer to see it go elsewhere than scrap. Making a list of interest.

05-11-2005, 07:39 PM	#1
Stevonator Registered User Join Date: Nov 2004 Location: Lorain (Cleveland) Ohio Posts: 69	Parting out 69 LWB GMC in Cleveland Parting out 69 LWB GMC. I drove this truck into my shop in December. It is a Northern ohio truck and is simply not worth resto. All parts are fair game at best offer....there are 18 days of school left (i'm a teacher) and anything left over after the last school day goes to the scrapyard. I'll try to describe things best I can and will reply to inquiries about the condition of specific parts but due to the vast number of parts I don't have time to try to photo them all. There are not a ton of good parts.....as far as sheet metal the hood is the only part I'd call 100% solid. Some other parts would be fine if you have nothing and need something. If you are looking for something let me know. This is a non PS/ non PB/ non AC truck Some potential parts of interest: 3 speed trans. glass all there and in good cond. recoverable and usuable seat radiator 6 lug 3.73 leaf rear usuable and functional tailgate Complete set of keyed alike ignition and door locks. Original radio....unsure of operation Front axle assembly is completely disassembled. Leaf packs are disassembled Steering column is functional but not a show piece. Truck has green interior and ext. I will try to get at least A couple of general pics so general state can be seen. Bed is good for patches only rotted pretty hard. Cab is bad. It's a truck, but it is ROUGH. Frame has been pulled and completely unriveted. If you need a bracket or a crossmember I probably have it and it's probably already sandblasted. I also have all brand new grade 8 7/16 bolts/washers/locknuts (100 qty) that were going to replace all the rivets. First preference goes to anyone willing to pick up parts but I will ship.......In short....GET IT OUTTA MY SHOP. Email to evracer@yahoo.com or PM me.

05-11-2005, 07:54 PM	#2
chevyfarmer Registered User Join Date: Feb 2005 Location: Owosso, Mi Posts: 242	ignition and locks interested in the ignition and door locks, what is the price?? thanks __________________ 67 short wide 355ci 3 on tree 69 short wide 250ci 3 on tree 68 long wide 283 3 on tree 72 2wd Blazer project 454 5 speed

05-12-2005, 01:49 PM	#10
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	How is the windshield? I am possibly interested in it and the hood. I can pick them up, too. Also, how much for both? thanks __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

05-12-2005, 03:19 PM	#12
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	does it have decent looking front grill eyebrow moldings w/mounting clips that mount to the front fenders? If so may I have a few picts? Thanks __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder

05-12-2005, 10:49 PM	#14
Don Smith Registered User Join Date: Jul 2000 Location: Hampton, Ga, USA Posts: 217	Is the radio A.M. only? How does it look. __________________ 68 Short Stepside, 350, quadrajet, 700r4, 3:73 posi, power front discs, HEI, Factory Air, Tilt, Tach, accelerator cable instead of rod, sway bar. 96 Impala SS 97 Monte Carlo

05-11-2005, 08:11 PM	#3
Stevonator Registered User Join Date: Nov 2004 Location: Lorain (Cleveland) Ohio Posts: 69	How's $25 shipped?

05-11-2005, 10:18 PM	#4
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	what kind of shape is the grill in?

05-11-2005, 11:08 PM	#5
Stevonator Registered User Join Date: Nov 2004 Location: Lorain (Cleveland) Ohio Posts: 69	Grill is fair with the exception of one kink right about in the center. It's not show worthy but it's not mangled either....I guess I'd call it farm truck condition. It's what I would call repairable. I would probably have to get you a pic to really describe it. It's good enough to keep, but if I were restoring I'd probably replace it.

05-12-2005, 04:06 AM	#6
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	what about the tailgate? GMC Stamped w/ no major rust or dents? pics?

05-12-2005, 09:13 AM	#7
Stevonator Registered User Join Date: Nov 2004 Location: Lorain (Cleveland) Ohio Posts: 69	Tailgate is solid and functional, But dented, slightly concaved, and rusted on bottom. Better than no gate at all and functional, but not a what I would call a resto piece. Majority of the parts of this truck I would label as "functional and better than nothing". This gal was a rusty but trusty. It is however original.

05-12-2005, 11:14 AM	#8
1low1967 Registered User Join Date: May 2005 Location: Mohnton Posts: 87	How are the cab mounts on the frame it self. If decent I would be interested

05-12-2005, 11:27 AM	#9
1971custom Registered User Join Date: Apr 2005 Location: south west nebraska Posts: 244	how is the passenger fender

05-12-2005, 02:06 PM	#11
Stevonator Registered User Join Date: Nov 2004 Location: Lorain (Cleveland) Ohio Posts: 69	The cab mounts vary in condition, I know one is rotted beyond practical repair. If I'm not mistaken the other 3 are ok. The bottom of the cab is basically gone....I'm refering to the mounts that are riveted to the frame only. Passenger fender has some structural rust in the usual places. It is a straight fender, front cup rusted and finger sized rust hole in rear cup. All glasses are good, hood is surface rusted, but good, solid and straight. 1969 GMC please email me as I have a couple locals coming to look at it.....that way I can let it go to the highest offer. I'll try to help you out the best I can.

05-12-2005, 05:45 PM	#13
Stevonator Registered User Join Date: Nov 2004 Location: Lorain (Cleveland) Ohio Posts: 69	nope, one completely rusted one with dents.

05-13-2005, 12:30 AM	#15
Stevonator Registered User Join Date: Nov 2004 Location: Lorain (Cleveland) Ohio Posts: 69	Radio is AM only, but is complete with knobs. Showing it's age, chrome is dull, not sure how it would clean up. Again it's still in the dash....If I get around to pulling it I'll bench test it....right now it's inop....but that's not to say the problem is in the radio.



Register or Log In To remove these advertisements.

05-13-2005, 12:47 AM	#16
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	so are you getting another truck or what? that front setup you wanted of mine is here....might be sending it to scrap or something... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-13-2005, 08:49 AM	#17
Stevonator Registered User Join Date: Nov 2004 Location: Lorain (Cleveland) Ohio Posts: 69	no....I'm done....no time no place no money for it. My priorities have changed a little. Just spent a week in the hospital with a new disease that would probably keep me from getting it done anyway. My buddy is the original owner and he gets all the proceeds from the parts. If I get another it'll be already done.

05-13-2005, 10:00 AM	#18
1low1967 Registered User Join Date: May 2005 Location: Mohnton Posts: 87	Can you post a pic og the riveted mounts, or email me gtiracer55@hotmail.com Thanks

05-13-2005, 11:35 AM	#19
Stevonator Registered User Join Date: Nov 2004 Location: Lorain (Cleveland) Ohio Posts: 69	Which ones? All?

05-13-2005, 11:48 AM	#20
1low1967 Registered User Join Date: May 2005 Location: Mohnton Posts: 87	Riveted cab mounts please

05-13-2005, 11:49 AM	#21
1low1967 Registered User Join Date: May 2005 Location: Mohnton Posts: 87	sorry ummm if you wouldn't mind all the mounts

05-13-2005, 02:50 PM	#22
BertMac Registered User Join Date: Jul 2003 Location: texas Posts: 9	You said 3 speed tranny. If its a standard I am interested in the clutch pedals and linkage? Last edited by BertMac; 05-13-2005 at 02:50 PM.

05-13-2005, 09:09 PM	#23
Stevonator Registered User Join Date: Nov 2004 Location: Lorain (Cleveland) Ohio Posts: 69	Ok, I'm keeping notes here....anything with interest here I won't scrap. However, I have a couple locals that have expressed interest in some of the big parts and I want to focus on those first. I have to have the big stuff out of the shop by June 8. The small stuff can go with me if need be. One of these locals is potentially interested in a package deal so he gets priority.....past that it'll be first come first serve for the rest. Please keep inquiring......I'd rather have the parts go to other trucks than scrapped. I'm trying to make a list of stuff NOT to throw out. Bert, yes I have those parts. Last edited by Stevonator; 05-13-2005 at 09:10 PM.

05-14-2005, 10:31 AM	#24
BertMac Registered User Join Date: Jul 2003 Location: texas Posts: 9	Just email me if you want to sell them to me. bertmac1111@yahoo.com Thanks Bert

05-16-2005, 04:06 PM	#25
Stevonator Registered User Join Date: Nov 2004 Location: Lorain (Cleveland) Ohio Posts: 69	Anyone else got a need for something? I'd prefer to see it go elsewhere than scrap. Making a list of interest.

Register or Log In To remove these advertisements.