Anyone have a moog or napa p/n for trailing arm and panhard bar bushings for 70 C10? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CoryM · 07-03-2005, 09:11 PM

Hey guys,
Feels like my rear axle is starting to move a bit. There is no listing for those bushings in my books at work but if I can get a part number I can order them. If there are any left of course.
Thanks.
CoryM

kelsfine69 · 07-03-2005, 09:46 PM

I'd go with Energy Suspenson...........my2c

CoryM · 07-03-2005, 10:29 PM

Poly is out of the question. I doubt I would notice it on the truck, but in my camaro I learned all about poly and how poor of a bushing/bearing it is. I will never used poly on a moving part again.

Robert1970C20rstbukt · 07-03-2005, 11:51 PM

I think you can get these from almost all of the vendors.

long67 · 07-04-2005, 01:22 AM

I just got two fromm LMC for 11.95 each. Have to press them in.

cableguy0 · 07-04-2005, 03:53 AM

gmc pauls sells the whole track bar with new bushings installed for 35 bucks it was worth it to me to not have to fight to get the rubber out and press the new stuff in

55454 · 07-04-2005, 09:46 AM

I ordered the trailing arm bushings from a vendo r and they came in GM boxes, check GM.Pm me if you want me to locate the numbers I think I saved the boxes for future reference.

Tommy

**FRENCHBLUE72** · 07-04-2005, 10:07 AM

Chevy duty has em...

rubber traling arm bushing's... 11.95 each pt#74-876

72GMC51 · 07-04-2005, 10:16 AM

3762012 GM Trailing arm busing can buy them from any GM Dealer.
Tracking arm by a new one with bushings also conceder an adjustable if you ever plan on dropping your truck.
JC

CoryM · 07-06-2005, 10:59 PM

Thanks guys.
Kind of a moot point now since I just totalled my truck last night.

07-03-2005, 09:11 PM	#1
CoryM Registered User Join Date: Dec 1999 Location: Surrey, B.C. , Canada Posts: 874	Anyone have a moog or napa p/n for trailing arm and panhard bar bushings for 70 C10? Hey guys, Feels like my rear axle is starting to move a bit. There is no listing for those bushings in my books at work but if I can get a part number I can order them. If there are any left of course. Thanks. CoryM __________________ 1970 heavy duty C-10 fleetside sport truck. Vancouver B.C. Canada http://www.geocities.com/chevroletc1070 "Take up our quarrel with the foe: To you from failing hands we throw The torch; be yours to hold it high." Lieutenant Colonel John McCrae, Canadian Army

07-03-2005, 10:29 PM	#3
CoryM Registered User Join Date: Dec 1999 Location: Surrey, B.C. , Canada Posts: 874	Poly is out of the question. I doubt I would notice it on the truck, but in my camaro I learned all about poly and how poor of a bushing/bearing it is. I will never used poly on a moving part again. __________________ 1970 heavy duty C-10 fleetside sport truck. Vancouver B.C. Canada http://www.geocities.com/chevroletc1070 "Take up our quarrel with the foe: To you from failing hands we throw The torch; be yours to hold it high." Lieutenant Colonel John McCrae, Canadian Army

07-03-2005, 11:51 PM	#4
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	I think you can get these from almost all of the vendors. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

07-04-2005, 01:22 AM	#5
long67 Registered User Join Date: Dec 2003 Location: Yakima,WA. Posts: 150	I just got two fromm LMC for 11.95 each. Have to press them in. __________________ Mark 67 c20 custom camper 55 Olds 2dr hardtop 96 mustang 11 dodge nitro

07-04-2005, 03:53 AM	#6
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	gmc pauls sells the whole track bar with new bushings installed for 35 bucks it was worth it to me to not have to fight to get the rubber out and press the new stuff in __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member. Last edited by cableguy0; 07-04-2005 at 03:53 AM.

07-03-2005, 09:46 PM	#2
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	I'd go with Energy Suspenson...........my2c

07-04-2005, 09:46 AM	#7
55454 55454 Join Date: Mar 2005 Location: Lafayette La. Posts: 340	I ordered the trailing arm bushings from a vendo r and they came in GM boxes, check GM.Pm me if you want me to locate the numbers I think I saved the boxes for future reference. Tommy

07-04-2005, 10:07 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Chevy duty has em... rubber traling arm bushing's... 11.95 each pt#74-876 __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-04-2005, 10:16 AM	#9
72GMC51 72GMC51 Join Date: Jul 2004 Location: Minnesota Posts: 233	3762012 GM Trailing arm busing can buy them from any GM Dealer. Tracking arm by a new one with bushings also conceder an adjustable if you ever plan on dropping your truck. JC __________________ 72 GMC 2wd 1/2 long 350 700r4 A/C PS PB 4:10. Are they ever really finished

07-06-2005, 10:59 PM	#10
CoryM Registered User Join Date: Dec 1999 Location: Surrey, B.C. , Canada Posts: 874	Thanks guys. Kind of a moot point now since I just totalled my truck last night. __________________ 1970 heavy duty C-10 fleetside sport truck. Vancouver B.C. Canada http://www.geocities.com/chevroletc1070 "Take up our quarrel with the foe: To you from failing hands we throw The torch; be yours to hold it high." Lieutenant Colonel John McCrae, Canadian Army



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.