Rear bumper brackets different from pickups? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71swb4x4 · 07-09-2005, 10:46 PM

I am replacing my late model bumper with a sport bumper. The brackets I have are hitting the body mount. I pulled a bracket off my 4x4 Blazer and it has been clearanced so it doesn't hit the body mount. I assume this is the way Blazer brackets were correct? So I can just remove some material from my truck bumper brackets to make them fit?

I have attached a picture. The one off the Blazer is longer, but it looks like I will still have at least two bolt holes that match up with the frame on the shorter one. I don't want to remove as much material b/c you can see that the one broke at a bolt hole.

bouncytruck · 07-09-2005, 11:52 PM

2wd & 4wd bumper brackets are different. I'm not sure what is different, perhaps what you posted. I just know there are always separate listings for 4wd brackets.

71swb4x4 · 07-10-2005, 01:07 AM

I thought that was the front brackets. The front brackets are different because of the spring hangers.

bouncytruck · 07-10-2005, 01:18 AM

Ahh, could be. I just remembered there was some that were different.

**special-K** · 07-10-2005, 06:55 AM

Is there a coil vs leaf difference in the rear?

LUV2XCLR8 · 07-10-2005, 07:31 AM

Here is a pic of the ones I sold to a member earlier this year,
I did not need them because a 72 Blazer uses the end of the
frame as the inner brackets, and yes 2wd and 4wd front are
different also because of the spring hangers as mentioned

*Can't verify whether or not they are p/u or blazer, my PO
got alot of parts for "GQ" off of a rust free cali 67 cst p/u

**Classic Heartbeat** · 07-10-2005, 11:54 AM

This set of bumper brackets is for the SWB 2X4 and all 4X4. Note the length and reinforcement piece welded to the bracket.

Here is the LWB 2X4 and Coil Spring Rear set. Note they are shorter and no reinforcement. The outers are the same.

I would guess that the reinforcement would keep the bracket from braking like 71swb4x4's.
WES www.ClassicHeartbeat.com

71swb4x4 · 07-10-2005, 11:58 AM

Thanks for the pictures Wes. So should my 2wd Jimmy use the bottom ones? I think I am going to have to do some modifying to get these to work.

**Classic Heartbeat** · 07-10-2005, 12:50 PM

Is the 2WD a leaf spring rear? If so, the (top) 4X4 ones will be what it needs. WES

71swb4x4 · 07-10-2005, 02:43 PM

It's coils. I had to trim a tiny amount from the flanged part, it was hitting the rear body mount. The body has been off before, and they used a couple of big washers, one is interfering with the bumper bracket, not a big deal. They are on now. Thanks for the help!!

cheyenne10 · 07-11-2005, 12:38 AM

Which brackets work on swb leaf spring 2x4?

07-09-2005, 10:46 PM	#1
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Rear bumper brackets different from pickups? I am replacing my late model bumper with a sport bumper. The brackets I have are hitting the body mount. I pulled a bracket off my 4x4 Blazer and it has been clearanced so it doesn't hit the body mount. I assume this is the way Blazer brackets were correct? So I can just remove some material from my truck bumper brackets to make them fit? I have attached a picture. The one off the Blazer is longer, but it looks like I will still have at least two bolt holes that match up with the frame on the shorter one. I don't want to remove as much material b/c you can see that the one broke at a bolt hole. Attached Images __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

07-09-2005, 11:52 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	2wd & 4wd bumper brackets are different. I'm not sure what is different, perhaps what you posted. I just know there are always separate listings for 4wd brackets. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L Last edited by bouncytruck; 07-09-2005 at 11:53 PM.

07-10-2005, 01:07 AM	#3
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I thought that was the front brackets. The front brackets are different because of the spring hangers. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

07-10-2005, 01:18 AM	#4
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Ahh, could be. I just remembered there was some that were different. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

07-10-2005, 06:55 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Is there a coil vs leaf difference in the rear? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-10-2005, 07:31 AM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Here is a pic of the ones I sold to a member earlier this year, I did not need them because a 72 Blazer uses the end of the frame as the inner brackets, and yes 2wd and 4wd front are different also because of the spring hangers as mentioned *Can't verify whether or not they are p/u or blazer, my PO got alot of parts for "GQ" off of a rust free cali 67 cst p/u Attached Images __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-10-2005, 11:54 AM	#7
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	This set of bumper brackets is for the SWB 2X4 and all 4X4. Note the length and reinforcement piece welded to the bracket. Here is the LWB 2X4 and Coil Spring Rear set. Note they are shorter and no reinforcement. The outers are the same. I would guess that the reinforcement would keep the bracket from braking like 71swb4x4's. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

07-10-2005, 11:58 AM	#8
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Thanks for the pictures Wes. So should my 2wd Jimmy use the bottom ones? I think I am going to have to do some modifying to get these to work. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

07-10-2005, 12:50 PM	#9
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Is the 2WD a leaf spring rear? If so, the (top) 4X4 ones will be what it needs. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

07-10-2005, 02:43 PM	#10
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	It's coils. I had to trim a tiny amount from the flanged part, it was hitting the rear body mount. The body has been off before, and they used a couple of big washers, one is interfering with the bumper bracket, not a big deal. They are on now. Thanks for the help!! __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

07-11-2005, 12:38 AM	#11
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Good pics Wes Which brackets work on swb leaf spring 2x4? __________________ Bob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.