What have i got myself into???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'70_402** · 07-23-2005, 09:09 AM

Just kidding... Look what i started yesterday evening.... Painless 18 circut wiring harness. Complete replacement for every single wire in my truck... It has been really simple so far.. wires labled and prebundled.

Although i will say it is pretty intimadating opening up that box and seeing all those wires.... WHEW!!!

here are some pics so far..

**'70_402** · 07-23-2005, 09:10 AM

heres one more

**Hart_Rod** · 07-23-2005, 09:21 AM

Did you have to cut the firewall? What part number did you use? Who did you purchase from? How much? Good luck!

Rob

Gray Ghost · 07-23-2005, 09:27 AM

Looks like aliens jumped outta yer dash! Bet it'll be nice when you're finished. That task would intimidate me a bit (having never done it).

**'70_402** · 07-23-2005, 10:11 AM

Quote:

Originally Posted by Hart_Rob

Did you have to cut the firewall? What part number did you use? Who did you purchase from? How much? Good luck!

Rob

Yes i did have to cut my firewall and drill two new holes. I only had to cut about 1/4 at the most. Part number 10206. got it from jegs and it cost me 309.99 but right now painless has a 35 dollar rebate if you buy before the end of the month.. so it equals out to be about 275 bucks

68w/sbc406 · 07-23-2005, 11:58 AM

you needed a hammer to run wires in your truck

71RestoRod · 07-23-2005, 02:48 PM

It's not too bad if you take your time and check things out as you go along.

Couple of observations... There's a few funky things about the way they are wired up that you might want to think about while you're there... some of it you might not care about. One thing you might not notice until you are done (I didn't) is that the power to the radio does not come off of the accessory circuit, so when you turn the ignition to the left, no radio. Easy enough to fix while you're at it. Other things that I thought were pretty weak (but you might not care about) include their "work around" if you are using a high output alternator w/ a lot of accessories, and the power window wiring is always hot... not keyed. You may also want to rewire your side markers to work with the parking lights. There's probably a few other things that I forgot...

**'70_402** · 07-26-2005, 09:15 AM

Well got her all buttoned up last night and i can say that it was the easiest wiring job i have ever done... It is just really really really time consuming. Although i do have one question.. last night when i started her up she was running great and when i shut her off SHE WAS STILL RUNNING GREAT!!!! it wouldn't shut off.. I traced the prob to the wires comming off the alternator.. I think i am getting some feedback from the alt. exciter wire and it is keeping the system powered up.. (it will work and shut off just fine with the plug on the alt. disconnected) So can i just go and get a one way diode and splice it into that wire? I think that might work...

I would recommend the painless wiring kit to anyone.

67ChevyRedneck · 07-26-2005, 09:32 AM

70'_402: Did you get to specify things, like V-8, HEI, automatic/manual etc... or is it "one size fits all" with extra wires? I also have the 67 "3 dislplay" dash and would like to switch to one that has all the gages. Is there any specification on this, or does it come wired for either one??? Thanks

**'70_402** · 07-26-2005, 12:22 PM

It comes wired for evey option that was offered and some that weren't.. you can either wire up the guage pod with lights or with guages.. as far as hei, you just bypass the ballast resistor and wire directly to the distributor....very simple

as far as specifics, you will have some extra wires for options that you don't have or need. one size fits all i guess you could say.

Deuce · 07-26-2005, 02:47 PM

I just used the Painless harness for my 383 TPI wiring and it worked awsome, and easy to do.

cheyenne10 · 07-26-2005, 03:28 PM

any pics of completed installation and words of wisdom for others considering this upgrade?

**hilljob26** · 07-26-2005, 08:47 PM

yes,i agree,when i started mine,i was really overwhelmed,but as you go,pice by piece,it gets easier and easier,worked out great for my power locks and windows

pickemup · 07-26-2005, 09:10 PM

fantastic im in. and thanx for sharing

Deuce · 07-27-2005, 10:03 AM

Quote:

Originally Posted by 71RestoRod

It's not too bad if you take your time and check things out as you go along.

Couple of observations... There's a few funky things about the way they are wired up that you might want to think about while you're there... some of it you might not care about. One thing you might not notice until you are done (I didn't) is that the power to the radio does not come off of the accessory circuit, so when you turn the ignition to the left, no radio. Easy enough to fix while you're at it. Other things that I thought were pretty weak (but you might not care about) include their "work around" if you are using a high output alternator w/ a lot of accessories, and the power window wiring is always hot... not keyed. You may also want to rewire your side markers to work with the parking lights. There's probably a few other things that I forgot...

Is the whole power feed not coming from the dead side of the starter(until the key is in the run position) I think that is the same point the dist draws power from too?? Thats why no radio while the key is in the acc position????

69Goody · 07-27-2005, 03:51 PM

Kudos to Painless. I went through this setup not long ago...well I'm sort of still doing it as I add more gizmos like a radio, A/C, etc...
It sure is nice to have modern fuses and labeled wires. Although I'm still trying to figure out where my cruise control wire from painless plugs in..

'til I do, I'll just keep using my floormat propped against my gas pedal.

edmonton72 · 07-27-2005, 04:10 PM

I think I'm going to let my dad do the wiring in my truck. That looks way to complicated for me to do, especially scince I have never none anything like this in my life.

71RestoRod · 07-27-2005, 11:40 PM

Quote:

Originally Posted by Deuce

Is the whole power feed not coming from the dead side of the starter(until the key is in the run position) I think that is the same point the dist draws power from too?? Thats why no radio while the key is in the acc position????

The wiring follows very closely to stock with a few obvious additions but it's not really upgraded as much as it could be. The power comes off of the battery and alternator. The radio lead is just not wired into the accessory circuit. Don't get me wrong, it's a great setup and it's relatively easy to install. there are just a few things that I wished had been different. Easy enough to address if you think it through. Even with the 18 circuits I had to add a couple external fuses to isolate everything the way I wanted.

chip46wis · 07-29-2005, 07:45 AM

Looks like a electricians nightmare!!!!! all too soon I will be going through this myself but going to use a EZ wire---anyone use this brand?

MandarinSixSeven · 07-29-2005, 06:15 PM

Would you even go as far as saying it was painless?

07-23-2005, 09:09 AM	#1
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	What have i got myself into???? Just kidding... Look what i started yesterday evening.... Painless 18 circut wiring harness. Complete replacement for every single wire in my truck... It has been really simple so far.. wires labled and prebundled. Although i will say it is pretty intimadating opening up that box and seeing all those wires.... WHEW!!! here are some pics so far.. Attached Images __________________ https://www.ebay.com/itm/295742064443

07-23-2005, 09:10 AM	#2
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	heres one more Attached Images __________________ https://www.ebay.com/itm/295742064443

07-23-2005, 09:21 AM	#3
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,840	Did you have to cut the firewall? What part number did you use? Who did you purchase from? How much? Good luck! Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-23-2005, 09:27 AM	#4
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Looks like aliens jumped outta yer dash! Bet it'll be nice when you're finished. That task would intimidate me a bit (having never done it). __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

07-23-2005, 11:58 AM	#6
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	you needed a hammer to run wires in your truck __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

07-23-2005, 02:48 PM	#7
71RestoRod Registered User Join Date: Sep 2003 Location: Evergreen, CO Posts: 494	It's not too bad if you take your time and check things out as you go along. Couple of observations... There's a few funky things about the way they are wired up that you might want to think about while you're there... some of it you might not care about. One thing you might not notice until you are done (I didn't) is that the power to the radio does not come off of the accessory circuit, so when you turn the ignition to the left, no radio. Easy enough to fix while you're at it. Other things that I thought were pretty weak (but you might not care about) include their "work around" if you are using a high output alternator w/ a lot of accessories, and the power window wiring is always hot... not keyed. You may also want to rewire your side markers to work with the parking lights. There's probably a few other things that I forgot... __________________ 71 Blazer / GMPP ZZ383 / MPFI / 700R4 / 4-Wheel Disk / Ground-up frame off almost completed resto-mod

07-26-2005, 09:15 AM	#8
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	Well got her all buttoned up last night and i can say that it was the easiest wiring job i have ever done... It is just really really really time consuming. Although i do have one question.. last night when i started her up she was running great and when i shut her off SHE WAS STILL RUNNING GREAT!!!! it wouldn't shut off.. I traced the prob to the wires comming off the alternator.. I think i am getting some feedback from the alt. exciter wire and it is keeping the system powered up.. (it will work and shut off just fine with the plug on the alt. disconnected) So can i just go and get a one way diode and splice it into that wire? I think that might work... I would recommend the painless wiring kit to anyone. __________________ https://www.ebay.com/itm/295742064443

07-26-2005, 09:32 AM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	70'_402: Did you get to specify things, like V-8, HEI, automatic/manual etc... or is it "one size fits all" with extra wires? I also have the 67 "3 dislplay" dash and would like to switch to one that has all the gages. Is there any specification on this, or does it come wired for either one??? Thanks __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-26-2005, 12:22 PM	#10
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	It comes wired for evey option that was offered and some that weren't.. you can either wire up the guage pod with lights or with guages.. as far as hei, you just bypass the ballast resistor and wire directly to the distributor....very simple as far as specifics, you will have some extra wires for options that you don't have or need. one size fits all i guess you could say. __________________ https://www.ebay.com/itm/295742064443

07-26-2005, 02:47 PM	#11
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	I just used the Painless harness for my 383 TPI wiring and it worked awsome, and easy to do. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

07-26-2005, 03:28 PM	#12
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	pics any pics of completed installation and words of wisdom for others considering this upgrade? __________________ Bob

07-26-2005, 08:47 PM	#13
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	yes,i agree,when i started mine,i was really overwhelmed,but as you go,pice by piece,it gets easier and easier,worked out great for my power locks and windows __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

07-26-2005, 09:10 PM	#14
pickemup Registered User Join Date: Jun 2005 Location: fresno calif. Posts: 88	fantastic im in. and thanx for sharing Last edited by pickemup; 07-26-2005 at 09:11 PM.

07-27-2005, 03:51 PM	#16
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	Re: Painless Kudos to Painless. I went through this setup not long ago...well I'm sort of still doing it as I add more gizmos like a radio, A/C, etc... It sure is nice to have modern fuses and labeled wires. Although I'm still trying to figure out where my cruise control wire from painless plugs in.. 'til I do, I'll just keep using my floormat propped against my gas pedal. __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG.

07-27-2005, 04:10 PM	#17
edmonton72 Nothings as cool as my 72 Join Date: May 2005 Location: Edmonton, AB, Kanuckastan Posts: 181	I think I'm going to let my dad do the wiring in my truck. That looks way to complicated for me to do, especially scince I have never none anything like this in my life. __________________ 1972 C10 Longbox In the middle of body off restoration Rebuilt 355, turbo 400, 3.42 12-bolt Rolling chassis finally done and cab mounted. Now onto sanding, bondo and more sanding.



Register or Log In To remove these advertisements.

07-29-2005, 07:45 AM	#19
chip46wis Registered User Join Date: Dec 2004 Location: Central Wisconsin Posts: 1,317	Looks like a electricians nightmare!!!!! all too soon I will be going through this myself but going to use a EZ wire---anyone use this brand?

07-29-2005, 06:15 PM	#20
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	Would you even go as far as saying it was painless? __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

Register or Log In To remove these advertisements.