Nice sounding mufflers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddpile · 10-13-2005, 05:27 PM

Well, it finally happened. One of the old rusty glasspacks on my truck finally rotted through, and the other one is about 2 weeks from doing the same. The entire exhaust system is brand new duals from the manifolds back, but the previous owner put on some old rusty glasspacks. Now, long story short I have a truck that kinda has that bad glasspack/straight pipe/exhaust leak sound going for it. What does everyone run for mufflers that flow good, have a nice tone but not too noisy for a driver and aren't too much money? I have been looking into Thrush glasspacks and turbo mufflers, and also Dynomax Ultra Flows and Flowmaster 40s. I haven't priced any of these out yet, but they all look like they flow good. Anyone have any other suggestions? Thanks!

LUV2XCLR8 · 10-13-2005, 05:34 PM

I have MAGNAFLOW's on "GQ", the HOOKER areo chamber's sound good 2

matthufham · 10-13-2005, 05:35 PM

flowmaster 40's, not delta flow flowmaster 40's, that's a big difference. the 40 series are louder.

Fred T · 10-13-2005, 05:56 PM

I have dynomax super turbos, they're not as loud as flowmasters, but still sound good.

blazerparts · 10-13-2005, 06:00 PM

Just put cherry bombs on mine.

uk72step · 10-13-2005, 06:40 PM

I have straight thru pipes from headers into resonator tips with rear exit...Kinda loud!!!! n rusted. When rebuilding plan to use the LMC system (non glasspack) for a more mellow sound....

Flowmasters are good, couple of friends have had Edelbrock glasspacks that have blown the glass through the back end. May not be a product issue though, may have been mismatched products?? flowrates etc? However they have moved to Flowmasters on their rides and won't be changing back.....

Cheers
Lee

1STtimePRo'71 · 10-13-2005, 07:02 PM

I dont like glasspacks. I think they sound like crap. I'd def. put turbo mufflers on it.

Joe67 · 10-13-2005, 07:33 PM

Flowmaster

vtblazer · 10-13-2005, 07:33 PM

For a big block, it's gotta be a 70 series flow master, IMO
For small blocks on the cheaper end, I like the Dynamax 'super turbos' they have an extra chamber and sound reall good, once again IMO...

96blazr · 10-13-2005, 08:16 PM

I'm using the Flowtech AfterBurners and couldn't be more pleased. Not as loud as Flowcrappers.
LUV2XCLR8 is right, the Hooker Areo Chambers do sound good. I was thinking about those, but went with the AfterBurners . I got them from Summit for $40 bucks a piece.

You should take measurements to make sure whatever muffler you do go with they can make the distance between pipes, so you won't have to weld any gap piping.

Do you know how long your old Packs were(are)?

BubbaGreen · 10-13-2005, 08:40 PM

anybody using the FlowMaster-50 series mufflers?
I too am looking for something not too loud, but not so quiet that it kills performance.
I am considering the above from summit....2.5" version
Apprieciate any input...dont mean to steal the thread either....

**Palf70Step** · 10-13-2005, 08:44 PM

Quote:

Originally Posted by BubbaGreen

anybody using the FlowMaster-50 series mufflers?
I too am looking for something not too loud, but not so quiet that it kills performance.
I am considering the above from summit....2.5" version
Apprieciate any input...dont mean to steal the thread either....

That would be me. I have 50's and dual catback system on my 96 and I love them. Inside the cab you just barely here a rumble unless you stomp on it. I am told it is very nice, some say a little loud from the outside. I never hear it from the outside, but even cruisin in the 70-80 range, it is just a nice rumble. You know you got them, but they won't drive you nuts on long drives. I definitely felt the chnge going from the stock system far as the power goes.

jsbgump · 10-13-2005, 08:47 PM

luv my 40 series flowmasters

Jim_PA · 10-13-2005, 08:53 PM

I was a big flowmaster guy, and for the first time tried a set of magnaflows. I like them much better!

Derrickbwg · 10-13-2005, 08:53 PM

My flowmasters are way to loud imo. I only have the stock insulation and it's to loud to use a phone with with the window down at 45....that's annoying. Not that I live on the phone while I drive but I do use it. Plus, long trips just plain wear you out from the noise, add to the noise a radio that you have to blast to even hear and the enviroment is not fun. Conversations are carried out just below a shout. They sound cool but you have to give up a lot just to be loud(won't be a problem for some)

I'd rather sound like a new vette!

Joe67 · 10-13-2005, 08:56 PM

Quote:

Originally Posted by BubbaGreen

anybody using the FlowMaster-50 series mufflers?
I too am looking for something not too loud, but not so quiet that it kills performance.
I am considering the above from summit....2.5" version
Apprieciate any input...dont mean to steal the thread either....

I have a Stainless Flowmaster 50 series single in dual out on my 5.3l GMC Sierra. It may not have the same sound as an older setup, but here is a sound clip if you are interested

texascowboy593 · 10-13-2005, 09:06 PM

40 series flows w/ 2 1/2 pipedown at a 75 degree angle just b4 rear axle hooked to flowtech headers... at idle in gear (500 rpm) nice and quiet but people next to you know you got a pair. When its time to gas on it and move at a high rate of fuel consumption, the cops WILL notice you!

Bowtiefreak · 10-13-2005, 09:12 PM

Dynomax Ultraflows
Flowmaster
Magnaflow
Hooker Areo Chambers
Dynomax Super Turbos
Spintechs
Edelbrock
Borla
All of these are VERY good mufflers. Some are a little louder than others, but again, are VERY good mufflers. Adding an X or H pipe makes a difference in sound levels on each of these mufflers but the addition of a crossover pipe of either style is worth the effort.

70 Bowtie · 10-13-2005, 09:17 PM

My truck us not on the road yet, I ran imco's on my 67 chevelle they sound allot like flowmaster without the cost!!

Brett

70chevyfreak · 10-13-2005, 10:32 PM

Quote:

Originally Posted by BubbaGreen

anybody using the FlowMaster-50 series mufflers?
I too am looking for something not too loud, but not so quiet that it kills performance.
I am considering the above from summit....2.5" version
Apprieciate any input...dont mean to steal the thread either....

I have the Flowmaster 50s with headers on my 70 and they sound great.Not very loud in the cab but they sound good shooting out the back.

72Short_Cut · 10-13-2005, 11:41 PM

Dynomax Super Turbos

muddpile · 10-14-2005, 12:30 AM

Looks like my choices are fairly limited as I measured tonight..... I have dual 2" exhaust with a 24" long glasspack on each side. The glasspacks kind of have offset angled ends on them, and I doesn't look like a regular muffler would even fit in there. It is right before the rear axle. Hopefully I can figure something out, but it sure doesn't look like I have a lot of choice at the moment.

Aquivarious · 10-14-2005, 01:17 AM

I used to have flowmaster 40s on my old 85,and IMO they sounded so much better that the glasspacks i imploded (dont ask, i still trying to figure that one out).

I say if you put new mufflers on, doesnt matter the pattern or length, just remount the rear sections of exhaust! Shouldnt be too hard unless somethings in the way...

Premium72 · 10-14-2005, 02:03 AM

Quote:

Originally Posted by texascowboy593

40 series flows w/ 2 1/2 pipedown at a 75 degree angle just b4 rear axle hooked to flowtech headers... at idle in gear (500 rpm) nice and quiet but people next to you know you got a pair. When its time to gas on it and move at a high rate of fuel consumption, the cops WILL notice you!

holy hell..the EXACT way my truck is run...damn.

like he says sittn there your like..damn its not all that loud..but, you hear that gnarley growl..folks know sumthns there...stomp the gas to the floor..oh yeah...you get what your lookn for...just a mean nasty grunty RUAHHHHHHHHHHHHHHHHHHHHHHHHH-----RUAHHHHHHHHHHHHHHHHH!!!.. ahh i cant wait till i can get my truck out on the street....
good luck with what ever you do...dont put glass packs on it..they sound like some one fartn through a coffe can...ehh..

Premium72 · 10-14-2005, 02:05 AM

oh an the 2 chamer 40's are like 50 a pop around here..pretty cheep for what you get in my opinoin.

10-13-2005, 05:27 PM	#1
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Nice sounding mufflers? Well, it finally happened. One of the old rusty glasspacks on my truck finally rotted through, and the other one is about 2 weeks from doing the same. The entire exhaust system is brand new duals from the manifolds back, but the previous owner put on some old rusty glasspacks. Now, long story short I have a truck that kinda has that bad glasspack/straight pipe/exhaust leak sound going for it. What does everyone run for mufflers that flow good, have a nice tone but not too noisy for a driver and aren't too much money? I have been looking into Thrush glasspacks and turbo mufflers, and also Dynomax Ultra Flows and Flowmaster 40s. I haven't priced any of these out yet, but they all look like they flow good. Anyone have any other suggestions? Thanks! __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

10-13-2005, 05:34 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	I have MAGNAFLOW's on "GQ", the HOOKER areo chamber's sound good 2 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-13-2005, 05:56 PM	#4
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	I have dynomax super turbos, they're not as loud as flowmasters, but still sound good. __________________ Fred There is no such thing as too much cam...just not enough engine.

10-13-2005, 06:00 PM	#5
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	Just put cherry bombs on mine. __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater

10-13-2005, 06:40 PM	#6
uk72step outta the car velocityboy Join Date: Nov 2004 Location: Scotland Posts: 112	I have straight thru pipes from headers into resonator tips with rear exit...Kinda loud!!!! n rusted. When rebuilding plan to use the LMC system (non glasspack) for a more mellow sound.... Flowmasters are good, couple of friends have had Edelbrock glasspacks that have blown the glass through the back end. May not be a product issue though, may have been mismatched products?? flowrates etc? However they have moved to Flowmasters on their rides and won't be changing back..... Cheers Lee __________________ ..give it a turn here, take some wedge out there, we'll win some races...

10-13-2005, 05:35 PM	#3
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	flowmaster 40's, not delta flow flowmaster 40's, that's a big difference. the 40 series are louder.

10-13-2005, 07:02 PM	#7
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	I dont like glasspacks. I think they sound like crap. I'd def. put turbo mufflers on it. __________________ -Cory 1967 2 Wheel Chevy

10-13-2005, 07:33 PM	#8
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Flowmaster __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

10-13-2005, 07:33 PM	#9
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	For a big block, it's gotta be a 70 series flow master, IMO For small blocks on the cheaper end, I like the Dynamax 'super turbos' they have an extra chamber and sound reall good, once again IMO...

10-13-2005, 08:16 PM	#10
96blazr Registered User Join Date: Aug 2003 Location: VA Posts: 740	I'm using the Flowtech AfterBurners and couldn't be more pleased. Not as loud as Flowcrappers. LUV2XCLR8 is right, the Hooker Areo Chambers do sound good. I was thinking about those, but went with the AfterBurners . I got them from Summit for $40 bucks a piece. You should take measurements to make sure whatever muffler you do go with they can make the distance between pipes, so you won't have to weld any gap piping. Do you know how long your old Packs were(are)? __________________ 1968 SWB. GMPP 350/350 Turbo Trans, Edelbrock Performer & Carb. Hedman Hedders, Hooker Aerochambers Mufflers. Tuff Stuff Alternators. Remember, no matter where you go, There you are. Gary

10-13-2005, 08:40 PM	#11
BubbaGreen Senior Member Join Date: Mar 2001 Location: Cedar Park, TX Posts: 686	anybody using the FlowMaster-50 series mufflers? I too am looking for something not too loud, but not so quiet that it kills performance. I am considering the above from summit....2.5" version Apprieciate any input...dont mean to steal the thread either.... __________________ 71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich

10-13-2005, 08:47 PM	#13
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	luv my 40 series flowmasters __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

10-13-2005, 08:53 PM	#14
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	I was a big flowmaster guy, and for the first time tried a set of magnaflows. I like them much better!

10-13-2005, 08:53 PM	#15
Derrickbwg Registered User Join Date: Sep 2005 Location: Lexington KY Posts: 64	My flowmasters are way to loud imo. I only have the stock insulation and it's to loud to use a phone with with the window down at 45....that's annoying. Not that I live on the phone while I drive but I do use it. Plus, long trips just plain wear you out from the noise, add to the noise a radio that you have to blast to even hear and the enviroment is not fun. Conversations are carried out just below a shout. They sound cool but you have to give up a lot just to be loud(won't be a problem for some) I'd rather sound like a new vette! __________________ 1971 Chevy swb Chevy trucks and import cars

10-13-2005, 09:06 PM	#17
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	40 series flows w/ 2 1/2 pipedown at a 75 degree angle just b4 rear axle hooked to flowtech headers... at idle in gear (500 rpm) nice and quiet but people next to you know you got a pair. When its time to gas on it and move at a high rate of fuel consumption, the cops WILL notice you! __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)



Register or Log In To remove these advertisements.

10-13-2005, 09:12 PM	#18
Bowtiefreak Registered User Join Date: Jul 2003 Location: LeRoy, Mich. Posts: 854	Dynomax Ultraflows Flowmaster Magnaflow Hooker Areo Chambers Dynomax Super Turbos Spintechs Edelbrock Borla All of these are VERY good mufflers. Some are a little louder than others, but again, are VERY good mufflers. Adding an X or H pipe makes a difference in sound levels on each of these mufflers but the addition of a crossover pipe of either style is worth the effort. __________________ 1968 Chevy C10 Short Fleetside/Wood floor ECE 4-6 Drop / 406 Small Block 1971 Chevelle 427 Big Block

10-13-2005, 09:17 PM	#19
70 Bowtie Registered User Join Date: Jul 2005 Location: South Dakota Posts: 70	My truck us not on the road yet, I ran imco's on my 67 chevelle they sound allot like flowmaster without the cost!! Brett

10-13-2005, 11:41 PM	#21
72Short_Cut Registered User Join Date: Feb 2005 Location: Red Deer, Alberta, Canada Posts: 48	Dynomax Super Turbos __________________ 1972 Chevy Short Box Ls1 swap 1977 chevy Chevette

10-14-2005, 12:30 AM	#22
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Looks like my choices are fairly limited as I measured tonight..... I have dual 2" exhaust with a 24" long glasspack on each side. The glasspacks kind of have offset angled ends on them, and I doesn't look like a regular muffler would even fit in there. It is right before the rear axle. Hopefully I can figure something out, but it sure doesn't look like I have a lot of choice at the moment. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

10-14-2005, 01:17 AM	#23
Aquivarious Registered User Join Date: Sep 2005 Location: Alton, Illinois Posts: 90	I used to have flowmaster 40s on my old 85,and IMO they sounded so much better that the glasspacks i imploded (dont ask, i still trying to figure that one out). I say if you put new mufflers on, doesnt matter the pattern or length, just remount the rear sections of exhaust! Shouldnt be too hard unless somethings in the way... __________________ '71 Chevy C-10 SWB (Project) '04 Mazda RX-8 (F*** around Car) '85 Chevy C-20 (Former Project) Currently Serving In IRAQ. (Man it sucks over here..)

10-14-2005, 02:05 AM	#25
Premium72 Registered User Join Date: Sep 2005 Location: Villa Rica Ga Posts: 889	oh an the 2 chamer 40's are like 50 a pop around here..pretty cheep for what you get in my opinoin.

Register or Log In To remove these advertisements.