How did you mount your newer seat? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 01-03-2006, 11:52 AM

I now have a 92 or so Chevy bench I want to install in my 71. I know the holes don't all line up. What type of bracket did you make or use to mount yours? I want it solid and as pleasing on the eyes as possible. Pics would be great.

Putter · 01-03-2006, 11:54 AM

I drilled new holes in the floor where needed, and installed nice strong bolts with LARGE washers under the cab for extra thickness!!!

boundstaffpress · 01-03-2006, 02:04 PM

Putter has the plan.
It is always smarter to use fine thread bolts on seats and seatbelts.

72MARIO · 01-03-2006, 02:34 PM

I set the seat flat on the floor. Marked and drilled the hole. I also used massive fender washers on the under side of the cab.

I ran the seat like that for about 3 months then I pulled it out and pie cut the seat brackets so I had a little more rake to the seat.

01-03-2006, 11:52 AM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	How did you mount your newer seat? I now have a 92 or so Chevy bench I want to install in my 71. I know the holes don't all line up. What type of bracket did you make or use to mount yours? I want it solid and as pleasing on the eyes as possible. Pics would be great. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

01-03-2006, 11:54 AM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: How did you mount your newer seat? I drilled new holes in the floor where needed, and installed nice strong bolts with LARGE washers under the cab for extra thickness!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-03-2006, 02:04 PM	#3
boundstaffpress Jamie Hyneman is my twin Join Date: Nov 2005 Location: La Junta, Colorado Posts: 705	Re: How did you mount your newer seat? Putter has the plan. It is always smarter to use fine thread bolts on seats and seatbelts. __________________ Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis

01-03-2006, 02:34 PM	#4
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Re: How did you mount your newer seat? I set the seat flat on the floor. Marked and drilled the hole. I also used massive fender washers on the under side of the cab. I ran the seat like that for about 3 months then I pulled it out and pie cut the seat brackets so I had a little more rake to the seat. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.