![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,781
|
Redneck OEM Dual exhaust
I like the sound of my 2006 OEM 4800 WT so instead of throwimg away a partial exhaust system to get duals --here is how I set my duals up for a factory look.
Parts are about 8" of 2.5" OD aluminized exhaust pipe, 1 -- 2.75" muffler clamps, and an empty can of Pepsi with a hose clamp--temporary. Mig welder and a 2.5" hole saw blade. I will let my favorite exhaust shop bend and connect and I hope he has a short piece of 2.75" oem pipe for the end. To split the flow the new outlet nipple is fishmouthed toward the engine and dips not quite halfway into the back. The nipple location is behind the axle. I also add a small hanger bracket on the frame for the muffler shop to use. This is my second as I did the same thing on my 2002 Z71. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2004
Location: Oklahoma
Posts: 1,057
|
Re: Redneck OEM Dual exhaust
Looks like you have allready replaced the w/t wheels too
__________________
Youth soon passes away, but immaturity can last a life time. |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,781
|
Re: Redneck OEM Dual exhaust
Yea --brought it home with a set of 2007 Tahoe wheels and tires---will keep the others for winter in the north.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,781
|
Finished --- Redneck OEM Dual exhaust
B&G in Grapevine did a nice finish.
|
![]() |
![]() |
![]() |
#5 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Redneck OEM Dual exhaust
How does it sound? Did you add any kind of a performance muffler, like a flowmaster? If I'm looking that the picures at the top correctly, it was basically split in the rear before the spare tire? Looks good
![]()
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,781
|
Re: Redneck OEM Dual exhaust
sounds about the same--just comes out both sides and looks stock --low budget...
|
![]() |
![]() |
![]() |
Bookmarks |
|
|