|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-05-2006, 06:41 AM
|
#1 |
|
New Member
Join Date: Dec 2005
Location: spring tx
Posts: 7
|
67/72 cab and swb step side fenders
the cab is a non a/c cab with new cab corners installed but not finished, new drivers side floor pan bought but not installed.
this cab is not bad the rockers are good but the inside seal area is bad and the lower kick panel area, also it has a good back glass. i have 275.00 into this and that's all i want out of it unless you have a sb 400 thatis a 509 casting. fenders are not bad need a little work, one in the mounting area(rusted) and the other has a one inch crack in the center of the lip,the drivers does not havethe spare cut out.....100.00 for both. i'm in houston do not want to ship but will travel a little if needed just need to move, project is gone and new one here.i will post pictures tonight or tomorrow. |
|
|
|
04-05-2006, 11:07 AM
|
#2 |
|
Senior Member
 
Join Date: Jan 2005
Location: Claremore, OK 74017
Posts: 2,640
|
Re: 67/72 cab and swb step side fenders
Are the fenders 67 or 68-72
__________________
68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4 |
|
|
|
|
04-05-2006, 11:34 AM
|
#3 |
|
New Member
Join Date: Dec 2005
Location: spring tx
Posts: 7
|
Re: 67/72 cab and swb step side fenders
they are off a 69.
|
|
|
|
|
04-05-2006, 11:06 PM
|
#4 |
|
Registered User
Join Date: Mar 2006
Location: Irving, Texas
Posts: 27
|
Re: 67/72 cab and swb step side fenders
If you still have those stepside fenders I'll take them. Do you have the steps for them too?
AL |
|
|
|
|
05-12-2006, 04:20 PM
|
#5 |
|
Registered User
Join Date: Oct 2004
Location: Richmond, VA
Posts: 68
|
Re: 67/72 cab and swb step side fenders
Do you still have this? Do you have pictures?
|
|
|
|
|
05-12-2006, 04:26 PM
|
#6 |
|
71 GMC 454/TH400
Join Date: Dec 2005
Location: Blue Mound TX
Posts: 214
|
Re: 67/72 cab and swb step side fenders
Any pics of the cab? IF blades buys the fenders or 79 buys them we could all get together
__________________
"The bigger you are the harder you fall, the farther you walk the longer you crawl." |
|
|
|
|
05-13-2006, 09:49 AM
|
#7 |
|
Registered User
Join Date: Oct 2004
Location: Richmond, VA
Posts: 68
|
Re: 67/72 cab and swb step side fenders
I was just interested about the cab.
|
|
|
|
|
05-13-2006, 05:59 PM
|
#8 |
|
71 GMC 454/TH400
Join Date: Dec 2005
Location: Blue Mound TX
Posts: 214
|
Re: 67/72 cab and swb step side fenders
oops sorry......
__________________
"The bigger you are the harder you fall, the farther you walk the longer you crawl." |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
