71-72 1/2 TON 4X4 PICS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72 Super** · 04-28-2002, 05:50 PM

Hi,If any members have 71-72 1/2 4x4 pictures I would like to see some.I see quite of few 3/4 tons but hardly any 1/2 tons.Here in Maryland where I am there isn't no 4x4's that I know of.Thanks in advance.

Ray

Beast388 · 04-28-2002, 06:40 PM

Here is my 1971 Suburban.....

------------------
71 GMC Suburban 4X4
The "Beast"
388 CID Stroker, Scat crank, H-beam steel rods, KB Pistons, Speed-Pro Moly Rings, Clevite bearings, Speed-Pro High Volume oil-pump, Comp Cams 254H 4X4 Xtreme cam, SR Torquer 2.02/1.60 heads, Comp springs, Trick Flow pushrods, Comp Roller Rockers, Edelbrock Performer RPM intake, 3310 750cfm Holley, Summit HEI, MSD 6AL, Built TH350 Transcat Supper II shift kit 2000 RPM Stall, 4" Rough Country Lift....etc.

[This message has been edited by Beast388 (edited April 29, 2002).]

[This message has been edited by Beast388 (edited May 02, 2002).]

**72 Super** · 04-28-2002, 06:45 PM

Beast,is there alot of older suburbans out your way?There isn't none around here.

Ray

Mudder · 04-28-2002, 06:49 PM

Did you check out the pics page on this site? May be a good place to look.

------------------
67 stepside 4x4 Owensville MO mudder67@hotmail.com

Beast388 · 04-28-2002, 06:51 PM

Nope....not too many around here. When I do see another Suburban, it usually isn't a 4X4. I think I have the only one that is driven with any regularity.

------------------
71 GMC Suburban 4X4
The "Beast"
388 CID Stroker, Scat crank, H-beam steel rods, KB Pistons, Speed-Pro Moly Rings, Clevite bearings, Speed-Pro High Volume oil-pump, Comp Cams 254H 4X4 Xtreme cam, SR Torquer 2.02/1.60 heads, Comp springs, Trick Flow pushrods, Comp Roller Rockers, Edelbrock Performer RPM intake, 3310 750cfm Holley, Summit HEI, MSD 6AL, Built TH350 Transcat Supper II shift kit 2000 RPM Stall, 4" Rough Country Lift....etc.

O'l Buck · 04-28-2002, 07:00 PM

probably not what you were looking for, but here's my 72

http://www.freephoto-i.net/users/Ol%27%20Buck/buck%20right%20side.JPG[/img][/URL]
------------------
Ol' Buck: '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84
ralleys and 31/10.5s

Angel girl: 67 Cutlass convertible
330, 3spd stick

Greener: 90 GMC Jimmy
350/auto
Chad Stephens
Orleans,NE

no name yet: 72 442 under serious construction

[This message has been edited by O'l Buck (edited April 28, 2002).]

[This message has been edited by O'l Buck (edited April 28, 2002).]

[This message has been edited by O'l Buck (edited April 28, 2002).]

[This message has been edited by O'l Buck (edited April 28, 2002).]

**Joesjunk** · 04-28-2002, 11:09 PM

Here is one of mine.

------------------
1972 3/4T 402/auto 60k original miles, original paint
1971 1/2t 4x4 frame restored, original paint body put back on it
1968 1ton dually CST 52k original mile, restored
1972 1ton dually cheyenne flatbed, scrap hauler
1972 blazer,rust free, original paint, next project
72 2wd blazer for the above rust free body
1972 3/4t 4x4 GMC, For sale
1968 1/2t 4x4, For sale
72 2wd jimmy, for sale
1969 camaro ss396 4-speed, restored stock
Other67-72 parts trucks
Lots of parts for sale
2002 GMC 2500HD crew cab 4x4 diesel, I have to have something to drive to work everyday

Independence, MO

MeanGreen · 04-29-2002, 04:25 PM

here is a picture of my 1972 K10 4X4

MeanGreen · 04-29-2002, 04:38 PM

I'm the 7th reply and only three above look like they have posted pictures of there truck but all I see is a red X. Is everybody else seeing pictures?????????

Bill72BB · 04-29-2002, 04:43 PM

meangreen I only see your truck and 3 red X's .

Bill

------------------
72 3/4ton Custom Camper BB,400 Dynamax Cermax headers , air,ps,pb,leafsprings
tilt,3.54 . 82 chevy silverado sb ,ps,pb pw,pd,air 350/350 Flowmaster 40.
Torrance Calif.

" If I knew I was going to live this long I would have taken better care of myself "

**BIG ORANGE** · 04-29-2002, 04:47 PM

Meangreen thats a sharp ride there friend,and yes all I see is red Xs would like to see Beast388s burb. also.

------------------
1971 chevy suburban (BIG ORANGE)
1970,68,90 swb Little BUCKS one day
67/72 truck parts bought/sold
LIFE IS GOOD,THANK GOD FOR IT!

**72 Super** · 04-29-2002, 05:03 PM

Thanks guys leat I know they were made LOL.Seriously I would like to find one.

Meangreen, is that the stock height?what size wheels and tires are you running?

Joesjunk,thats a sweet truck.Is that the one you have in your signature?(original paint body)I've never seen that color combo.

MeanGreen · 04-29-2002, 08:01 PM

72 super, Yes that is the factory height. I'm running 33X15 and they fit perfect. I'd have to lift it to get any bigger. They look nice lifted (hell, great lifted) but I'm keeping mine stock. Thanks all for your compliments, but for some reason it looks almost perfect in pictures when in fact it is only a really nice driver.

devinfife · 04-29-2002, 08:45 PM

does anyone know if 33 inch tires will fit on a 2wd half ton?

------------------
69 c-10. turquoise. 350 motor with 400 trans. long fleet. headers and dual flowmaster exhaust. K & N air cleaner, aluminum wheels and radials, stereo system and a bed liner.

Brewski* · 04-29-2002, 10:59 PM

Green that is one nice lookin 1/2 ton. Here's my pic lets see if it works 3/4 ton sorry had to test the pix!

------------------
Red Rocket: Stock 1971 GMC KE2500, LWB, Custom Camper, 4x4, 350 V8, 4 bbl, 4 speed http://www.brewski.freehomepage.com/index.html

Beast388 · 05-02-2002, 09:19 AM

Hey....Freephoto-i still works.....goodie!

------------------
71 GMC Suburban 4X4
The "Beast"
388 CID Stroker, Scat crank, H-beam steel rods, KB Pistons, Speed-Pro Moly Rings, Clevite bearings, Speed-Pro High Volume oil-pump, Comp Cams 254H 4X4 Xtreme cam, SR Torquer 2.02/1.60 heads, Comp springs, Trick Flow pushrods, Comp Roller Rockers, Edelbrock Performer RPM intake, 3310 750cfm Holley, Summit HEI, MSD 6AL, Built TH350 Transcat Supper II shift kit 2000 RPM Stall, 4" Rough Country Lift....etc.

04-28-2002, 05:50 PM	#1
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,680	71-72 1/2 TON 4X4 PICS Hi,If any members have 71-72 1/2 4x4 pictures I would like to see some.I see quite of few 3/4 tons but hardly any 1/2 tons.Here in Maryland where I am there isn't no 4x4's that I know of.Thanks in advance. Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

04-28-2002, 06:40 PM	#2
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	Here is my 1971 Suburban..... ------------------ 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, Scat crank, H-beam steel rods, KB Pistons, Speed-Pro Moly Rings, Clevite bearings, Speed-Pro High Volume oil-pump, Comp Cams 254H 4X4 Xtreme cam, SR Torquer 2.02/1.60 heads, Comp springs, Trick Flow pushrods, Comp Roller Rockers, Edelbrock Performer RPM intake, 3310 750cfm Holley, Summit HEI, MSD 6AL, Built TH350 Transcat Supper II shift kit 2000 RPM Stall, 4" Rough Country Lift....etc. [This message has been edited by Beast388 (edited April 29, 2002).] [This message has been edited by Beast388 (edited May 02, 2002).] __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

04-28-2002, 06:45 PM	#3
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,680	Beast,is there alot of older suburbans out your way?There isn't none around here. Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

04-28-2002, 06:51 PM	#5
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	Nope....not too many around here. When I do see another Suburban, it usually isn't a 4X4. I think I have the only one that is driven with any regularity. ------------------ 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, Scat crank, H-beam steel rods, KB Pistons, Speed-Pro Moly Rings, Clevite bearings, Speed-Pro High Volume oil-pump, Comp Cams 254H 4X4 Xtreme cam, SR Torquer 2.02/1.60 heads, Comp springs, Trick Flow pushrods, Comp Roller Rockers, Edelbrock Performer RPM intake, 3310 750cfm Holley, Summit HEI, MSD 6AL, Built TH350 Transcat Supper II shift kit 2000 RPM Stall, 4" Rough Country Lift....etc. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

04-28-2002, 07:00 PM	#6
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	probably not what you were looking for, but here's my 72 http://www.freephoto-i.net/users/Ol%27%20Buck/buck%20right%20side.JPG[/img][/URL] ------------------ Ol' Buck: '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84 ralleys and 31/10.5s Angel girl: 67 Cutlass convertible 330, 3spd stick Greener: 90 GMC Jimmy 350/auto Chad Stephens Orleans,NE no name yet: 72 442 under serious construction [This message has been edited by O'l Buck (edited April 28, 2002).] [This message has been edited by O'l Buck (edited April 28, 2002).] [This message has been edited by O'l Buck (edited April 28, 2002).] [This message has been edited by O'l Buck (edited April 28, 2002).] __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

04-28-2002, 06:49 PM	#4
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Did you check out the pics page on this site? May be a good place to look. ------------------ 67 stepside 4x4 Owensville MO mudder67@hotmail.com

04-28-2002, 11:09 PM	#7
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Here is one of mine. ------------------ 1972 3/4T 402/auto 60k original miles, original paint 1971 1/2t 4x4 frame restored, original paint body put back on it 1968 1ton dually CST 52k original mile, restored 1972 1ton dually cheyenne flatbed, scrap hauler 1972 blazer,rust free, original paint, next project 72 2wd blazer for the above rust free body 1972 3/4t 4x4 GMC, For sale 1968 1/2t 4x4, For sale 72 2wd jimmy, for sale 1969 camaro ss396 4-speed, restored stock Other67-72 parts trucks Lots of parts for sale 2002 GMC 2500HD crew cab 4x4 diesel, I have to have something to drive to work everyday Independence, MO __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

04-29-2002, 04:25 PM	#8
MeanGreen Registered User Join Date: Mar 2002 Location: Miramar, Florida Posts: 35	here is a picture of my 1972 K10 4X4 __________________ 1972 K10 Green. 2002 2500HD C/C D/A Green 12' airboat W/0-470 continental

04-29-2002, 04:38 PM	#9
MeanGreen Registered User Join Date: Mar 2002 Location: Miramar, Florida Posts: 35	I'm the 7th reply and only three above look like they have posted pictures of there truck but all I see is a red X. Is everybody else seeing pictures????????? __________________ 1972 K10 Green. 2002 2500HD C/C D/A Green 12' airboat W/0-470 continental

04-29-2002, 04:43 PM	#10
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	meangreen I only see your truck and 3 red X's . Bill ------------------ 72 3/4ton Custom Camper BB,400 Dynamax Cermax headers , air,ps,pb,leafsprings tilt,3.54 . 82 chevy silverado sb ,ps,pb pw,pd,air 350/350 Flowmaster 40. Torrance Calif. " If I knew I was going to live this long I would have taken better care of myself " __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

04-29-2002, 04:47 PM	#11
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,749	Meangreen thats a sharp ride there friend,and yes all I see is red Xs would like to see Beast388s burb. also. ------------------ 1971 chevy suburban (BIG ORANGE) 1970,68,90 swb Little BUCKS one day 67/72 truck parts bought/sold LIFE IS GOOD,THANK GOD FOR IT! __________________ Things happen for a reason!

04-29-2002, 05:03 PM	#12
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,680	Thanks guys leat I know they were made LOL.Seriously I would like to find one. Meangreen, is that the stock height?what size wheels and tires are you running? Joesjunk,thats a sweet truck.Is that the one you have in your signature?(original paint body)I've never seen that color combo. __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

04-29-2002, 08:01 PM	#13
MeanGreen Registered User Join Date: Mar 2002 Location: Miramar, Florida Posts: 35	72 super, Yes that is the factory height. I'm running 33X15 and they fit perfect. I'd have to lift it to get any bigger. They look nice lifted (hell, great lifted) but I'm keeping mine stock. Thanks all for your compliments, but for some reason it looks almost perfect in pictures when in fact it is only a really nice driver. __________________ 1972 K10 Green. 2002 2500HD C/C D/A Green 12' airboat W/0-470 continental

04-29-2002, 08:45 PM	#14
devinfife Registered User Join Date: Jan 2002 Location: Renton, WA Posts: 171	does anyone know if 33 inch tires will fit on a 2wd half ton? ------------------ 69 c-10. turquoise. 350 motor with 400 trans. long fleet. headers and dual flowmaster exhaust. K & N air cleaner, aluminum wheels and radials, stereo system and a bed liner. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB 69 c-10. turquoise. 350 motor with 400 trans. long fleet. headers and dual flowmaster exhaust. K & N air cleaner, aluminum wheels and radials, stereo system and a bed liner. Manual drums and manual steering. Kickin it in Seattle, WA p.s. i love my longbed. must be a phallic thing.

04-29-2002, 10:59 PM	#15
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Green that is one nice lookin 1/2 ton. Here's my pic lets see if it works 3/4 ton sorry had to test the pix! ------------------ Red Rocket: Stock 1971 GMC KE2500, LWB, Custom Camper, 4x4, 350 V8, 4 bbl, 4 speed http://www.brewski.freehomepage.com/index.html



Register or Log In To remove these advertisements.

05-02-2002, 09:19 AM	#16
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	Hey....Freephoto-i still works.....goodie! ------------------ 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, Scat crank, H-beam steel rods, KB Pistons, Speed-Pro Moly Rings, Clevite bearings, Speed-Pro High Volume oil-pump, Comp Cams 254H 4X4 Xtreme cam, SR Torquer 2.02/1.60 heads, Comp springs, Trick Flow pushrods, Comp Roller Rockers, Edelbrock Performer RPM intake, 3310 750cfm Holley, Summit HEI, MSD 6AL, Built TH350 Transcat Supper II shift kit 2000 RPM Stall, 4" Rough Country Lift....etc. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

Register or Log In To remove these advertisements.