|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-24-2006, 09:02 PM
|
#1 |
|
Registered User
 Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
1970 c10 drop spindle install questions
i,ve got a 1970 c10 chevy and its drum brakes with 6 lug wheels. i bought a set of classic 2" drop spindles and a new set of hubs-rotors, bearings etc. my question is when i remove my old stock spindles will the classic drop spindles bolt in the same ball joints & tierod ends or do i have to switch them out to 1971-72 yr. model ball joints & tierod ends. for the rear i,am gonna send my axles to moser eng. and have the bolt pattern changed to 5 lug and buy new drums that are for 5 lug chevy.THANKS FOR YOUR HELP GUYS.if anybody needs the front & rear 6 lug components let me know it only has 19,000 original miles on the truck.
BOB IN TN. |
|
|
|
11-24-2006, 10:21 PM
|
#2 |
|
Senior Member
Join Date: Aug 2006
Location: Minnesota
Posts: 943
|
Re: 1970 c10 drop spindle install questions
It depends on what spindles you bought. Some use the your original balljoints and others convert to the 73 and up balljoints. When I did it I bought the whole front end rebuild which converted the ball joints and tie rod ends to the 73 & up ones.
|
|
|
|
|
11-24-2006, 10:22 PM
|
#3 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: 1970 c10 drop spindle install questions
I believe you will have to change the ball joints and outer tie rod ends.
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop  Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
