bucket seats chicago il - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roj2323 · 11-21-2006, 02:45 AM

i got these with a parts truck and figured i'd share. i'm not sure if they're original as there mounted on what looks to be an aftermarket frame but decide for yorself. i'll take additional pictures just ask. how's 150 complete or 100 for just the frame.

beaterC10 · 11-21-2006, 08:50 AM

It looks like your parts truck is 4x4. What are your plans for the cab? I need a 4x4 trans tunnel for my 4x2 cab.

roj2323 · 11-21-2006, 09:32 AM

the truck is going to be striped to it's bones sold in peices and then finaly crushed =), i;ll sell ya whatever you need. it's got a working 400 with a t case attached i'm selling as well. it's an 1982 <-last yr for the 400.

beaterC10 · 11-22-2006, 09:02 AM

All I need is the transmission tunnel area of the floor. I want to install a fouir speed in my 2wd and it doesn't look like the existing tunnel is tall enough for the linkage. Is the cover on your truck bolted or welded in?

What part of IL is Winfield in? I am in Indianapolis, about 3-4 hours from Chicago.

roj2323 · 11-22-2006, 10:23 AM

i'll see if it's welded or bolted today. if it's bolted i'll pull it and get it boxed up. rather than waisting 30-40 in gas why don't i ship it. it should only be about $15 to ship. as for a price i really don't know what's fair since i'm a 67-72 guy. would $50 shipped work?

roj2323 · 11-22-2006, 10:23 AM

map to winfield > http://makeashorterlink.com/?J11332E3E

BowTieOgre · 12-04-2006, 09:58 PM

I could use that steering wheel and any other parts you may have that I need in THIS post. Thanks.

kevinr1970 · 12-04-2006, 11:59 PM

The passenger door panel looks pretty faded but is it dried out and chalky or is it in good enough shape to be re-dyed. How about the driver door panel?

roj2323 · 12-05-2006, 12:26 AM

i had a guy come buy the door pockets a week or so ago and he said they were in great shape, however i haven't really looked at them. i will however take a look tommarow.
ondrew

roj2323 · 12-05-2006, 12:27 AM

btw here's a link to a ton more pictues : http://www.maj.com/cgi-bin/gallery.cgi?f=128886

11-21-2006, 02:45 AM	#1
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	bucket seats chicago il i got these with a parts truck and figured i'd share. i'm not sure if they're original as there mounted on what looks to be an aftermarket frame but decide for yorself. i'll take additional pictures just ask. how's 150 complete or 100 for just the frame. Last edited by roj2323; 11-21-2006 at 09:33 AM.

11-21-2006, 08:50 AM	#2
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Re: bucket seats chicago il It looks like your parts truck is 4x4. What are your plans for the cab? I need a 4x4 trans tunnel for my 4x2 cab.

11-21-2006, 09:32 AM	#3
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	Re: bucket seats chicago il the truck is going to be striped to it's bones sold in peices and then finaly crushed =), i;ll sell ya whatever you need. it's got a working 400 with a t case attached i'm selling as well. it's an 1982 <-last yr for the 400.

11-22-2006, 09:02 AM	#4
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Re: bucket seats chicago il All I need is the transmission tunnel area of the floor. I want to install a fouir speed in my 2wd and it doesn't look like the existing tunnel is tall enough for the linkage. Is the cover on your truck bolted or welded in? What part of IL is Winfield in? I am in Indianapolis, about 3-4 hours from Chicago.

11-22-2006, 10:23 AM	#5
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	Re: bucket seats chicago il i'll see if it's welded or bolted today. if it's bolted i'll pull it and get it boxed up. rather than waisting 30-40 in gas why don't i ship it. it should only be about $15 to ship. as for a price i really don't know what's fair since i'm a 67-72 guy. would $50 shipped work?

11-22-2006, 10:23 AM	#6
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	Re: bucket seats chicago il map to winfield > http://makeashorterlink.com/?J11332E3E

12-04-2006, 09:58 PM	#7
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: bucket seats chicago il I could use that steering wheel and any other parts you may have that I need in THIS post. Thanks. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

12-04-2006, 11:59 PM	#8
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Re: bucket seats chicago il The passenger door panel looks pretty faded but is it dried out and chalky or is it in good enough shape to be re-dyed. How about the driver door panel? __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

12-05-2006, 12:26 AM	#9
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	Re: bucket seats chicago il i had a guy come buy the door pockets a week or so ago and he said they were in great shape, however i haven't really looked at them. i will however take a look tommarow. ondrew

12-05-2006, 12:27 AM	#10
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	Re: bucket seats chicago il btw here's a link to a ton more pictues : http://www.maj.com/cgi-bin/gallery.cgi?f=128886



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.