![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Feb 2007
Location: san bernardino ca
Posts: 41
|
better then a barn yard find
![]() ![]() ![]() ![]() ![]() ![]() alright here is my 1971 swb w/fatory air. i call this better then a bard yard fine, as this truck was found when i was driving in Running Springs Ca, I had to have it when i saw it. here is the sory on it this truck i bought from the original owner family. the sun who is a retired firefighter inhierted this truck in 1992 from his father after he had passed. the son took it and immediatly dropped it of in el cajon to have it repainted. and cleaned up. 8 months later he picked it up and drove it up the mountains to home where he parked it in a heated garage where it sat tell the day i bought it. on occasion. the guy would fire it up and take it down the street and then repark it. i eneded up finding the build seat under the seat. made copies and sealed 1 copy and the original in plastic cover and then replaced it. after talking to the previous owner i knew he had all the paper work on the truck. so i asked for him to drop it off. he did and inside it i found the protecto plate. and paper work dating all the way back to date of original deliver in 1971 including the deliver inspetion sheet. this truck had never left the state of california. so getting down to my inspection of the truck here is what i found. no previous body work done. the paint job was done using original color except i think it was also white suppose to be on there somewhere. me and 6 friends went thru this truck from roof to floor board bumper to bumper not a lick of rust anywhere and the floor still wear original paint and is super clean no oil no stains nothing. the trans a turbo 350 i belive to be number matching just cant prove yet . does have a small leak. the engine is a 350 agian i belive # matching. i just need to remove alt. or get maginifing glass to read the numbers looks all great runs well. it is a 4 barrel 350. i also belive carb is matching. the ca emmission sticker says it is a stock 350 4 brl. the a/c is all there the clutch on the condinser and maybe the whole thing needs rebuilt. it is all still un touched. the dash has never been cut and interior looks all new. i bought this truck as an investment with the intention to turn around and sell. im guessing but i belive 20 k is where it will sell. I am 100% confident it wont last at 15k. and i know i wont go below that. id rather hold it. 1. what do you think it is worth max and lowest 2. what do you think i should do with it? 3. what about lowering it 2-3 inchs? 4. arent those rims horrible, do you think they will look better if it was lowerd? 5. when i take this to pomona swap meet should i remove the bed shell?should i just remove it now 6. do you see any problems. some people have said it looked to be a cst custom. how can you tell? and what do i need. this ? is the most difficult the seat is bright blue it has is the walrus or vial with scrollin stamped into it but it also has what appears to be a blue cloth kind of material. it doesnt appear to be pladed or hoodstooth. but agian it maybe to worn and i am not getting cover off enough to look at it? ill try to get a quick pictue. what is this and where can i find a reproduction seat covers? ![]() ![]() ![]() ![]() thanks mike |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2007
Location: san bernardino ca
Posts: 41
|
Re: better then a barn yard find
40 views and no help
![]() |
![]() |
![]() |
![]() |
#3 |
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
Re: better then a barn yard find
my guess is that people assume someone who has bought a truck with plans to sell it for $20k already knows what he's doing....
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: better then a barn yard find
That is a good looking truck. I can't help with the questions because I think of trucks as trucks, not investments. I have the same feelings toward sports/muscle cars. I buy them to drive them, and I drive them the way they were meant to be driven.
My truck will never be that clean because it's a truck. I cruise it, I work it, I fix it. If you can get someone to pay $20k for an old truck, that's great. I paid $600 for my truck and should I ever sell it, anything over $600 is a bonus. <edit> Yes, those rims should be considered a crime against humanity.
__________________
New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210 Last edited by jimmydean; 02-12-2007 at 03:36 PM. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2000
Location: Edmonds, WA
Posts: 322
|
Re: better then a barn yard find
Try CARS, Inc. for the seat cover (www.carsinc.com). I believe you have the same custom/deluxe cloth cover that I have on my '72 Burb--I had CARS make me a new one about 3 years ago. Their website may not list the cloth, but give them a call or e-mail and they can check if they have enough of the cloth material in blue to do a cover for you. Cost was around $325. Here are a couple pics of mine installed.
__________________
'72 Chevy Suburban Custom Deluxe 10, 402/TH400 |
![]() |
![]() |
![]() |
#6 |
RIP Mr Ron
![]() Join Date: Dec 2005
Location: Big Sandy, Tn. 38221
Posts: 8,166
|
Re: better then a barn yard find
You didn't give how many miles the truck has on it so is it low or high mileage. It has been debadged and aftermarket wheels, the belt is off the a/c, and the trans has a little leak. Around here 1/4 of your asking price would be closer to what it's worth IMO. Of course I've been wrong before.
__________________
Ron (Mr Round Tuit) ![]() Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket |
![]() |
![]() |
![]() |
#7 |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Re: better then a barn yard find
That looks like quite a find.
I don't know much about value, but that seems to be a very nice surivor for sure. Please review the forum rules regarding 'what is it worth' threads - maybe become a subscriber ![]() Personally, if I had that truck for sale, i would remove the camper shell in a heartbeat. |
![]() |
![]() |
![]() |
#8 |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
Re: better then a barn yard find
It's a great looking truck. Looks like whoever painted it pulled the emblems from the fenders and filled them in. Not so sure it is a $20k truck, but at least you're in California where values are higher. I'm not so sure I would throw any money into lowering it just to sell it. I'd try to get some correct style rims on it though. You have a nice truck and ought to consider keeping it and enjoying it.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
![]() |
![]() |
![]() |
#9 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: better then a barn yard find
Your 71 looks to have the Custom option package, not the CST. (which woulda been a cheyenne in 71 anyways) It would be listed on both the SPID in the glove box, and on the build sheet you found under the seat. I am making this assumption on the fact that there are bright moldings for the glass, and the wing vent. Being that there's no wood trim lower belt moulding, nor tailgate band, and it has plastic matting instead of carpet, it isn't gonna be the CST/Cheyenne.
Your repaint does have either some metal work, or reproduction fenders, since the Custom 10 badges, and the 8/350 badges are missing. You mentioned thinking there was supposed to be white somewhere, unless there was trim removed, and smoothed over, there was never any white on that truck. Those wheels aren't all that bad. They aren't anything to write home about, but, I wouldn't think of them as a sin or anything. They look better (IMO) than most of the late model rims everyone seems to like, plus they fit right. Wheel wise, best bang for the buck, and original-ish look, you simply can't beat 15X8 chevy truck rallys with stock caps and rings. With a 275/60 or so tire in back ... maybe a 255/60 up front, it'll give it a bit of a muscular look without taking away from it's original flair. Personally, I prefer white letters, again, more muscular look, but enough people hate them, that I would go with a plain black wall to please the masses. If you want it original, it probably had white steel 15x7, or even 15x6 rims, with white hup caps, the baby moon or poverty caps, unless otherwise optioned... again, see the SPID or build sheet for this info. Your seat cover may just need a real good cleaning. Take a good look on the drivers side, this wasn't the best material as far as wear goes. Plenty of people will tell you it isn't original, it wasn't a common option, and not many ppl even like it. Upgrading to a hounds tooth may get you more in return, but it may hurt the value. That kind of mod is a tough call, it's not like wheels where you just jack it up and install booring wheels to make it original again. As for the cap on the back, I say remove it now. This way, you can inspect the top of the bed rails for holes drilled, and dents and scratches from that cap, or what ever cap or tool box may have been there before. I'd also leave it at home, or on the tow rig when you take it to auction... offer it to the winner for an added 100 bucks or so, and if the buyer doesn't want it, toss it on craigs list or something. Personally, it does nothing for the truck. It's too modern, doesn't have the smooth sexy lines that the truck has. Again, that is my opinion on that. Something else you may want to consider, getting that bumper off of there. No one will be spending that much money, on a short fleet classic and make it a work truck. That rear bumper may well be original, but probably a dealer installed item. A smooth chrome bumper (commonly called a sport bumper) would make the rear look MUCH better. While I don't follow the market very closely on upper end trucks or cars, I honestly don't see that being a $15,000 truck. Not too many people will pay top dollar for a basic equipped truck. I may well be wrong, but I really don't see it happening. Good luck on your sale though, and if you would, let us know what you got out of it when you auction it off. |
![]() |
![]() |
![]() |
#10 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: better then a barn yard find
wow...those 3 responses weren't there when i started typing.
|
![]() |
![]() |
![]() |
#11 | |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Re: better then a barn yard find
Quote:
![]()
__________________
Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member Last edited by Joe67; 02-12-2007 at 04:34 PM. |
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Jan 2005
Location: Ontario, Kali
Posts: 2,427
|
Re: better then a barn yard find
If you take it to Pomona, don't expect anything over 8k and alot of bogus offers to buy! There was enough said in the previous thread replies. I would take the shell off and ace the work bumper. If you are not planning on investing in new wheels, throw some later model center caps on those rims. I would also rebadge it with some quality emblems on the fenders to break up the monochrme paint scheme and paint the talgate letters white. I wouldn't lower it, since it looks driveable at the height it is right now. For serious money you may want to try and sell on "Old Chevy Trucks" website. Don't get me wrong, that's a great truck if there is no rust, many here envy that truck.
Just my $0.02 Dano Let me know when you take it to Pomona, I'd like to see it in person!
__________________
![]() ![]() It ain't yours, if you didn't build it! Last edited by Dano69c10; 02-12-2007 at 04:45 PM. |
![]() |
![]() |
![]() |
#13 | |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
Re: better then a barn yard find
Quote:
![]() ![]()
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 02-12-2007 at 04:44 PM. |
|
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() Join Date: Dec 2006
Location: Studio City, Calif.
Posts: 2,873
|
Re: better then a barn yard find
That's a very nice truck but I don't think you'll get 20K even in the land of fruits and nuts.
![]()
__________________
'69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme. |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Feb 2007
Location: san bernardino ca
Posts: 41
|
Re: better then a barn yard find
it is awesome i recived feedback from all of you. even tjou it may be the truth and alittle of what i may not have wanted to hear. it none the less is the truth. my opinion is as follows
i hate the rims. as far as the comment about knowing my trucks hummmmmmmmmm i have yet have 1 person who can tell me about it other then a reply here. which maybe close. i would like to see a more straight on shot. so i can compare. but i dought 90% of the people here could state what seat cover that is or where to find it. i do appreciate you stopping by with your help iveldesigns. and in no way is this suppose to be sarcastic. my field is in chevelle and elcaminos the top or bed cap, i have had almost everyone that seen it said remove it. that is the going opinon. i am lucky it is only clamped on and there looks to be good padding. the rear bumper. i think the rear bumper switch would do so much more. but i wish i knew what code v43 was on build sheet. i mean what it looked like. all paperwork dealer delivery, and build sheet says code 572 white and dk blu. it also has code looks like bxz bdy lower moldings. like to know what ones those are. i think there is 2 diffrent styles. i wonder where the with was and where the blue was. original family thinks the roof and down the middle was white. they are looking for photo the emblems and side molding was removed and i belive he stated the hole were welded and gound down. there is not a lick of rust. the trans i was gonna install a new rear seal of course. that is an easy enough fix. i need to repack the wheel bearings. the driver front i think may need attention. not a problem for me. the truck fires right up. idles smooth. no smoke or anything. no oil leaks from any other locations other then rear trans. it does have a small amount of seepage from valve covers. which ill address. ill share the build sheet bxz bdy lower molding j70? vac brake boost pu8 rg78x15x2+2 hww u63 p/button radio c60 air cond ip mtd ls9 v8 engine 350cu pu8 rg78x15x2+2 hww vj9 exh emmision labe c80 door lamp switch m38 3 spd auto tran pu8 sg78x15x2+2 hww v43 r/step bumper dg4 w/c jr mir stls n40 hydrl steering p01 whl trim covers z18 gvw plate f59 frt stablizer z53 amp-oil gage g50 hvy rear springs z62 comfort???n gr 572 white& dk blu 067 blue cloth tri anyone know the z62 pack? oh i did see the post about i wonder what it is worth and i didnt think i really hit that. but i did and want to acknowledge that thank you Last edited by meaniam; 02-12-2007 at 05:12 PM. |
![]() |
![]() |
![]() |
#16 | |
Registered User
Join Date: Feb 2007
Location: san bernardino ca
Posts: 41
|
Re: better then a barn yard find
Quote:
if i keep it i will toss the cap. lower it and throw some 17in tourque thrust II, and hopefully find a bed cover that fits in between the bed caps. and install dual exhast maybe a 40 ser flowmaster. or a billy boat exhast depending on weather i put a healthy cam in it Last edited by meaniam; 02-12-2007 at 05:23 PM. |
|
![]() |
![]() |
![]() |
#17 |
computer illiterate
Join Date: Jan 2001
Location: Des Moines, IA
Posts: 6,446
|
Re: better then a barn yard find
i say put stock rims and caps on it, change out the rear bumper for a sport bumper and ditch the topper and you have a 10-12k dollar truck
__________________
72 2wd blazer 72 swb 4x4 |
![]() |
![]() |
![]() |
#18 |
RIP Mr Ron
![]() Join Date: Dec 2005
Location: Big Sandy, Tn. 38221
Posts: 8,166
|
Re: better then a barn yard find
How many miles is the truck showing?
__________________
Ron (Mr Round Tuit) ![]() Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Feb 2007
Location: san bernardino ca
Posts: 41
|
Re: better then a barn yard find
|
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Nov 2006
Location: Illinois
Posts: 306
|
Re: better then a barn yard find
That is a really clean truck. Great find. I think i saw a jet boat behind it. And then lost concousness. Got any pics of the boat?
__________________
'67 C20 Lwb 350 4-Speed '01 Chrysler Concorde LXI (wifes ride) '91 Gmc Suburban 3/4 2wd 454 Tbi '51 Jeep Cj3a "Willys" 350 V8 |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Feb 2000
Location: Edmonds, WA
Posts: 322
|
Re: better then a barn yard find
Meaniam, were you asking me for another/different picture of my seatcover? It wasn't clear to me, so if you need that let me know. In looking at your close-up pic again, I am 98% sure that we have the same pattern. I'd describe the cloth pattern on mine (original rear seats and new front seatcover) as rows of small flowers--does that sound like what you have?
__________________
'72 Chevy Suburban Custom Deluxe 10, 402/TH400 |
![]() |
![]() |
![]() |
#22 | |
Registered User
Join Date: Feb 2007
Location: san bernardino ca
Posts: 41
|
Re: better then a barn yard find
Quote:
|
|
![]() |
![]() |
![]() |
#23 |
KEEP ON TRUCKIN'
![]() Join Date: Jun 2005
Location: Sterling, Va.
Posts: 5,731
|
Re: better then a barn yard find
Man, I love that color. Do you know the name of it? It's close to what my '71 is. I want to paint both of mine the same with different whit accents.
__________________
JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 ![]() http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER" ![]() |
![]() |
![]() |
![]() |
#24 |
Hunting is Life
Join Date: Jun 2005
Location: Buffalo,MN
Posts: 115
|
Re: better then a barn yard find
![]()
__________________
1970 GMC K-1500 4x4 292 I-6 3 on the tree-prodject truck ![]() 1971GMC 2500 2wd 350-v8 sm465 4spd-parts truck ![]() 2005 Ford Ranger 4.0/5spd auto 4x4 extended cab--everyday driver bought new ![]() ![]() |
![]() |
![]() |
![]() |
#25 |
In Memoriam...
Join Date: Nov 2006
Location: Wallburg, NC
Posts: 1,216
|
Re: better then a barn yard find
That is a really nice truck. Good luck if you try to sell, but she looks like a keeper...
Needs a little shine on the blackwalls ![]()
__________________
'68 C10 SWB 307ci 2BBL FarmTruk Pics Here "You know, doing what is right is easy. The problem is knowing what is right." |
![]() |
![]() |
![]() |
Bookmarks |
|
|