Parting 90' LD 2500 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1967k30 · 02-15-2007, 09:25 PM

I have a 90' Light Duty 2500,Ex-Cab,4x4,short box I'm parting.
It's complete still.Motor is locked up {350} good 700R4{supposedly rebuilt not too long ago according to the PO} ,good 241C
t-case,good driveshafts,14bolt SF rear end. Good interior,exterior a bit rough,no rust though.Has 4 tires that are around 40% and one that is like new. Have 5 6lug alluminum wheels too. Pic's below. Make offer on anything you want.

700R4/241C $650
14bolt SF w/3.73's $175
5 Tires and wheels $280 or $340 with alluminum wheels
$50 each for driveshafts

centsless · 02-17-2007, 10:15 PM

How much do you want for the seat, and where in NE are you?

Blue_71 · 02-18-2007, 01:18 AM

also curious on the seat, and what size are those wheels? how many miles? pics of radio? tbi in good shape? price on ecm?

1967k30 · 02-19-2007, 11:23 AM

It says 135K but the PO said he thought it has around 200K. The TBI seemed to work good when I started it up and ran it. I was only able to start it once before it locked up

. The wheels are 16"x7". I'll get some more pic's today. $50 for the ECM sound and $150 for the seat sound OK.

toddtime · 02-19-2007, 04:58 PM

PM'd you

1967k30 · 02-19-2007, 05:54 PM

More pic's of interior for you guys.

badpeanut · 02-19-2007, 08:24 PM

How much for the black "Chevrolet" horn button?

Blue_71 · 02-19-2007, 09:54 PM

ok how much for tbi and radio? im guessing the comp just has the stock chip?

ill ask the guy at work who needs a seat how much he wants to give

1967k30 · 02-19-2007, 10:54 PM

I assume it's stock. How much of the TBI do you want? Just the TBI itself or the whole fuel injection unit? How about $50 for the radio?

Quote:

Originally Posted by Blue_71

ok how much for tbi and radio? im guessing the comp just has the stock chip?

ill ask the guy at work who needs a seat how much he wants to give

1967k30 · 02-19-2007, 10:55 PM

Quote:

Originally Posted by badpeanut

How much for the black "Chevrolet" horn button?

msgross · 02-19-2007, 11:02 PM

How about the retractable trouble light? (circled in yellow I think??) If it's in working condition i'll send ya $15 to ship it to 17042.... Thanks...

Mike

Blue_71 · 02-20-2007, 01:33 AM

just the tbi-- really all i need is a 350 ECM chip and injector pod, but i figure ill just get a tbi and a ecm to get those (unless i find a good deal on a jet stage 2)

im trying to put tbi on a 71 K20... got everything to do it, but its mostly off a 305.

1967k30 · 02-20-2007, 03:06 PM

PM sent

1967k30 · 02-21-2007, 02:26 PM

Has a class 5 reciever hitch and a chrome grille guard also,I forgot to mention.

**special-K** · 02-21-2007, 02:58 PM

So,that`s got the rear a 1/2t 4wd guy would want,the 6-lug 14-bolt semi floatier.Not popular with 3/4 & 1 ton guys,but a brute compared to the 12-bolt in a 1/2t.Somebody should want this.Good luck with partin`.

1967k30 · 02-21-2007, 04:06 PM

Correct.

Quote:

Originally Posted by special-K

So,that`s got the rear a 1/2t 4wd guy would want,the 6-lug 14-bolt semi floatier.Not popular with 3/4 & 1 ton guys,but a brute compared to the 12-bolt in a 1/2t.Somebody should want this.Good luck with partin`.

msgross · 02-21-2007, 08:07 PM

any thoughts on the light?

toomanytoyz · 02-21-2007, 09:38 PM

Price for Mirrors shipped to Indiana 46702?

Thanks, Rick

1967k30 · 02-22-2007, 12:56 AM

Quote:

Originally Posted by toomanytoyz

Price for Mirrors shipped to Indiana 46702?

Thanks, Rick

One mirror is cracked the other is good. $20 for the one good one? Can ship for $8.10.

Mickey_D · 02-23-2007, 07:23 PM

What's the condition of the hood? Not so worried about the paint, just as to whether it's straight or not.

1967k30 · 02-23-2007, 08:24 PM

Quote:

Originally Posted by Mickey_D

What's the condition of the hood? Not so worried about the paint, just as to whether it's straight or not.

Beat

.

bloertcher · 02-24-2007, 11:21 AM

How much for the oil filter adapter,shipped to 65617?And do you accept paypal?

1967k30 · 02-24-2007, 01:06 PM

Quote:

Originally Posted by bloertcher

How much for the oil filter adapter,shipped to 65617?And do you accept paypal?

Can you explain it a bit. Not sure what it is? I do take Paypal if you're a verifyed buyer

.

bloertcher · 02-24-2007, 01:10 PM

It mounts to the block,it's aluminum,and turns the oil filter horizontally to clear the front driveshaft.
I am verified on paypal,as well.

1967k30 · 02-24-2007, 01:11 PM

Quote:

Originally Posted by bloertcher

It mounts to the block,it's aluminum,and turns the oil filter horizontally to clear the front driveshaft.
I am verified on paypal,as well.

OK, PM me an offer. I can ship it for $8.10 in a Flat Rate box. Thanks

02-15-2007, 09:25 PM	#1
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Parting 90' LD 2500 4x4 I have a 90' Light Duty 2500,Ex-Cab,4x4,short box I'm parting. It's complete still.Motor is locked up {350} good 700R4{supposedly rebuilt not too long ago according to the PO} ,good 241C t-case,good driveshafts,14bolt SF rear end. Good interior,exterior a bit rough,no rust though.Has 4 tires that are around 40% and one that is like new. Have 5 6lug alluminum wheels too. Pic's below. Make offer on anything you want. 700R4/241C $650 14bolt SF w/3.73's $175 5 Tires and wheels $280 or $340 with alluminum wheels $50 each for driveshafts Attached Images __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel. Last edited by 1967k30; 02-24-2007 at 01:10 PM.

02-17-2007, 10:15 PM	#2
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Parting 90' LD 2500 4x4 How much do you want for the seat, and where in NE are you? __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

02-19-2007, 11:23 AM	#4
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Parting 90' LD 2500 4x4 It says 135K but the PO said he thought it has around 200K. The TBI seemed to work good when I started it up and ran it. I was only able to start it once before it locked up . The wheels are 16"x7". I'll get some more pic's today. $50 for the ECM sound and $150 for the seat sound OK. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-19-2007, 04:58 PM	#5
toddtime Registered User Join Date: Sep 2006 Location: TN Posts: 25	Re: Parting 90' LD 2500 4x4 PM'd you

02-19-2007, 05:54 PM	#6
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Parting 90' LD 2500 4x4 More pic's of interior for you guys. Attached Images __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-19-2007, 08:24 PM	#7
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,756	Re: Parting 90' LD 2500 4x4 How much for the black "Chevrolet" horn button? __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

02-19-2007, 09:54 PM	#8
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,285	Re: Parting 90' LD 2500 4x4 ok how much for tbi and radio? im guessing the comp just has the stock chip? ill ask the guy at work who needs a seat how much he wants to give

02-19-2007, 11:02 PM	#11
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Parting 90' LD 2500 4x4 How about the retractable trouble light? (circled in yellow I think??) If it's in working condition i'll send ya $15 to ship it to 17042.... Thanks... Mike Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 02-19-2007 at 11:05 PM.

02-20-2007, 01:33 AM	#12
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,285	Re: Parting 90' LD 2500 4x4 just the tbi-- really all i need is a 350 ECM chip and injector pod, but i figure ill just get a tbi and a ecm to get those (unless i find a good deal on a jet stage 2) im trying to put tbi on a 71 K20... got everything to do it, but its mostly off a 305.

02-20-2007, 03:06 PM	#13
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Parting 90' LD 2500 4x4 PM sent __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-21-2007, 02:26 PM	#14
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Parting 90' LD 2500 4x4 Has a class 5 reciever hitch and a chrome grille guard also,I forgot to mention. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

02-21-2007, 02:58 PM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Parting 90' LD 2500 4x4 So,that`s got the rear a 1/2t 4wd guy would want,the 6-lug 14-bolt semi floatier.Not popular with 3/4 & 1 ton guys,but a brute compared to the 12-bolt in a 1/2t.Somebody should want this.Good luck with partin`. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-21-2007, 08:07 PM	#17
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Parting 90' LD 2500 4x4 any thoughts on the light? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-21-2007, 09:38 PM	#18
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Parting 90' LD 2500 4x4 Price for Mirrors shipped to Indiana 46702? Thanks, Rick

02-23-2007, 07:23 PM	#20
Mickey_D Dirteh Kitteh Join Date: Nov 2006 Location: Mormon country Posts: 2,484	Re: Parting 90' LD 2500 4x4 What's the condition of the hood? Not so worried about the paint, just as to whether it's straight or not. __________________ Darrin 1955 Willys CJ-5 all original and the oldest CJ-5 on the road. 2001 Dodge Neon (wife's car) 1995 Jeep Grand Cherokee Limited Edition SOLD 1981 K15 Custom Deluxe 4X4, rusty but trusty wood hauler. SOLD 1993 S-10 4X4 Tahoe SOLD Sign up with the Contact List RIP ESLL Last edited by Mickey_D; 02-23-2007 at 07:23 PM.



Register or Log In To remove these advertisements.

02-24-2007, 11:21 AM	#22
bloertcher Registered User Join Date: Jul 2003 Location: Springfield,Mo. Posts: 305	Re: Parting 90' LD 2500 4x4 How much for the oil filter adapter,shipped to 65617?And do you accept paypal?

02-24-2007, 01:10 PM	#24
bloertcher Registered User Join Date: Jul 2003 Location: Springfield,Mo. Posts: 305	Re: Parting 90' LD 2500 4x4 It mounts to the block,it's aluminum,and turns the oil filter horizontally to clear the front driveshaft. I am verified on paypal,as well.

Register or Log In To remove these advertisements.