What parts aren't out there? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1LoC10 · 02-26-2007, 10:01 PM

a whole steel replacement cab

caminokid · 10-09-2007, 11:40 AM

Quote:

Originally Posted by 1LoC10

a whole steel replacement cab

PanelDeland · 02-26-2007, 10:04 PM

If you're talking about stamping pieces.I think a shaved cowl would go.Also a inner/outer roof maybe from the beltline up.Maybe a single piece floor replacement.

jb4short · 02-26-2007, 10:14 PM

Quote:

Originally Posted by PanelDeland

If you're talking about stamping pieces.I think a shaved cowl would go.Also a inner/outer roof maybe from the beltline up.Maybe a single piece floor replacement.

I have a cowl coming in this week to send out. By "Shaved" do you mean just without antenna hole?

The front inner roof is available now. If you can; PM me a pic of what you're thinking.

guy51usa · 02-26-2007, 10:19 PM

How about a 71 72 hood pancaked to 67 profile, maybe even lower profile cowl induction hood

Orange · 02-27-2007, 02:56 PM

Quote:

Originally Posted by guy51usa

How about a 71 72 hood pancaked to 67 profile, maybe even lower profile cowl induction hood

YES! Just like the pie cut projects you see. A "stock" version and a cowl version.

jb4short · 02-27-2007, 03:32 PM

If someone can send a picture of the inner fender with the area you'd like to see made as a seperate piece we can easily make that from the existing tool.

Here's a picture to start with:

Stroker · 03-01-2007, 10:59 PM

Quote:

Originally Posted by guy51usa

How about a 71 72 hood pancaked to 67 profile, maybe even lower profile cowl induction hood

I think the 67-68 hoods built to fit 69-72 front clip would be a good one!!!!!!!!!

Frizzle Fry · 03-02-2007, 02:15 PM

Quote:

Originally Posted by Stroker

I think the 67-68 hoods built to fit 69-72 front clip would be a good one!!!!!!!!!

That's a great one!

whatnow123 · 02-26-2007, 10:43 PM

Quote:

Originally Posted by Tri-ProAutomotive

I have a cowl coming in this week to send out. By "Shaved" do you mean just without antenna hole?

The front inner roof is available now. If you can; PM me a pic of what you're thinking.

I think he means one without the "grills" and without the antenna hole. Sign me up for one of those.

jb4short · 02-26-2007, 10:52 PM

Any thoughts on an embossed headboard like this?

extd56 · 02-26-2007, 11:11 PM

Quote:

Originally Posted by whatnow123

I think he means one without the "grills" and without the antenna hole. Sign me up for one of those.

I would buy a couple of them, help keep the junk out of the cowl area and keep the rust issues down. I have a fiberglass version of the cowl on my 56 and love it.

JWPOORE · 02-26-2007, 11:41 PM

x2 on the Blazer rear carpet hold down trim & rear interior side panels. Also would really like to see hold down brackets for the rear seat made for 69-72 Blazers.

**Hart_Rod** · 02-26-2007, 10:15 PM

How about an upper liftgate for the suburbans?

Joe Gribben · 02-26-2007, 10:18 PM

i second hart rod how about a upper hatch for suburbans they all rust got to be a simple repop?

*72CSTC5* · 02-26-2007, 10:17 PM

Yeah I forgot, like the previous post said. The blazer besides for SURE. Plus I think alot of Suburban guys need the rear barn doors and tailgates rust out pretty bad from what I here.

longhorn70gmc · 02-26-2007, 10:22 PM

I would like to see Pointer Housings from 69 and 70 Steering columns made. The originals are plasic and crack. They already make 71-71 Pointer Housings.
Respectfully

badpeanut · 02-26-2007, 10:23 PM

How about Blazer rear carpet hold downs?

boraxman · 02-27-2007, 08:46 AM

Under the cab factory bucket seat mounting kit.

jkade · 02-27-2007, 05:18 PM

Quote:

Originally Posted by badpeanut

How about Blazer rear carpet hold downs?

I 2nd this

creeldaddy · 03-08-2007, 09:31 PM

ac dash panel
or a complete cab floor
did i say ac dash panel

Richard Dobson · 10-09-2007, 12:58 PM

Battery boxes, the one I bought from Year One has holes that don't line up with the radiator support at the vertical support on the rad supp. Regards

jb4short · 10-09-2007, 01:02 PM

Quote:

Originally Posted by Richard Dobson

Battery boxes, the one I bought from Year One has holes that don't line up with the radiator support at the vertical support on the rad supp. Regards

Standard battery tray? We have them...I just installed on on our '70 and it fit fine.

lyrikz · 10-09-2007, 03:17 PM

Quote:

Originally Posted by Tri-ProAutomotive

Standard battery tray? We have them...I just installed on on our '70 and it fit fine.

I have one that should be very easy and most all stepside owners might like this. Front patch panel for stepside fenders. ALL of them seem to rust out..

w/gcd72 · 10-09-2007, 03:25 PM

What about a cowl induction hood that was modeled after a 70 to 72 Chevelle cowl induction hood, that works just like the original, but on our trucks. I always thought that would look better than the cowl induction hoods out their right now.

02-26-2007, 10:01 PM	#1
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: What parts aren't out there? a whole steel replacement cab __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

02-26-2007, 10:04 PM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: What parts aren't out there? If you're talking about stamping pieces.I think a shaved cowl would go.Also a inner/outer roof maybe from the beltline up.Maybe a single piece floor replacement. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

02-26-2007, 10:19 PM	#5
guy51usa Registered User Join Date: Sep 2006 Location: wellington ks Posts: 50	Re: What parts aren't out there? How about a 71 72 hood pancaked to 67 profile, maybe even lower profile cowl induction hood

02-27-2007, 03:32 PM	#7
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: What parts aren't out there? If someone can send a picture of the inner fender with the area you'd like to see made as a seperate piece we can easily make that from the existing tool. Here's a picture to start with: Attached Images

02-26-2007, 10:52 PM	#11
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: What parts aren't out there? Any thoughts on an embossed headboard like this? Attached Images Last edited by jb4short; 02-26-2007 at 10:53 PM.

02-26-2007, 11:41 PM	#13
JWPOORE Registered User Join Date: Nov 2006 Location: Central Valley, CA Posts: 198	Re: What parts aren't out there? x2 on the Blazer rear carpet hold down trim & rear interior side panels. Also would really like to see hold down brackets for the rear seat made for 69-72 Blazers.

02-26-2007, 10:15 PM	#14
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,846	Re: What parts aren't out there? How about an upper liftgate for the suburbans? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-26-2007, 10:18 PM	#15
Joe Gribben Registered User Join Date: Aug 2006 Location: Wabash, Indiana Posts: 100	Re: What parts aren't out there? i second hart rod how about a upper hatch for suburbans they all rust got to be a simple repop?

02-26-2007, 10:17 PM	#16
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: What parts aren't out there? Yeah I forgot, like the previous post said. The blazer besides for SURE. Plus I think alot of Suburban guys need the rear barn doors and tailgates rust out pretty bad from what I here.

02-26-2007, 10:22 PM	#17
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: What parts aren't out there? I would like to see Pointer Housings from 69 and 70 Steering columns made. The originals are plasic and crack. They already make 71-71 Pointer Housings. Respectfully __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

02-26-2007, 10:23 PM	#18
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,756	Re: What parts aren't out there? How about Blazer rear carpet hold downs?

02-27-2007, 08:46 AM	#19
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	Re: What parts aren't out there? Under the cab factory bucket seat mounting kit. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

03-08-2007, 09:31 PM	#21
creeldaddy Registered User Join Date: Aug 2006 Location: columbia, tn Posts: 48	Re: What parts aren't out there? ac dash panel or a complete cab floor did i say ac dash panel

10-09-2007, 12:58 PM	#22
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	Re: What parts aren't out there? Battery boxes, the one I bought from Year One has holes that don't line up with the radiator support at the vertical support on the rad supp. Regards __________________ Richard Dobson

10-09-2007, 03:25 PM	#25
w/gcd72 Registered User Join Date: Aug 2007 Location: Dale, Indiana Posts: 41	Re: What parts aren't out there? What about a cowl induction hood that was modeled after a 70 to 72 Chevelle cowl induction hood, that works just like the original, but on our trucks. I always thought that would look better than the cowl induction hoods out their right now. __________________ 1972 C10 Custom Deluxe Longbed Fleetside (currently apart in the garage) '69 C10 Custom Deluxe Shortbed Fleetside (all original, including the brown recluses!) 1990 C1500 Shortbed Sportside



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.