Pics of 67 swp Altenator bracket needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ViperRed67 · 05-06-2002, 01:06 PM

I need to find and buy a set of Altenator brackets for my 67. I have the short water pump and no accesory holes in the heads. But, I do not know what they look like to spot some. Someone have a pic of the originals? I currently have a universal type and it flops all around. Please help.

*Fast68Chevy* · 05-06-2002, 01:11 PM

i have some, go to ebay and searxh for chevy alternator brackets, they are both stamped steel in 65-68 and bolts ot front face nose of the driver exh ram horn, i have pics of this nose up close if needed, email for them
can get pics of the brackets too. 65-68 driver ram horns are not same as pre65 and post68 ones

thanks

ViperRed67 · 05-06-2002, 01:14 PM

They bolt off the exhaust? I may be in trouble as I just swapped in headers!AAAAAHHH I need a break!

*Fast68Chevy* · 05-06-2002, 01:45 PM

lol

**CPNE** · 05-06-2002, 02:45 PM

I bought a 68 with headers and those brackets. Someone had fabbed an additional bracket to compensate for your situation. I may still have the homemade bracket and the OE brackets are on the way to me from Randy. Since my plans for the brackets have changed, I can sell you the whole setup if you'd like.

------------------
Jeff Jesseman
Cheyenne Parts Northeast
Franconia, NH

67 Chevy SWB Fleetside
70 GMC Burb 1/2 ton 2wd
72 Chevy Burb 3/4 ton 4x4

Parts bought and sold

ViperRed67 · 05-06-2002, 03:51 PM

How much? I am interested

*Fast68Chevy* · 05-06-2002, 05:16 PM

http://community.webshots.com/storag...7pjPHLG_ph.jpg

http://community.webshots.com/storag...6KWazWY_ph.jpg

[This message has been edited by Fast68Chevy (edited May 06, 2002).]

*Fast68Chevy* · 05-06-2002, 05:35 PM

if CPNE doesnt have what you need after all for some odd reaosn then check here:
http://cgi.ebay.com/ebaymotors/ws/eb...783682&r=0&t=0
http://cgi.ebay.com/ebaymotors/ws/eb...431777&r=0&t=0

**CPNE** · 05-06-2002, 08:07 PM

e-mail me. Once I get Randy's I'll take a pic of the entire setup for you

ViperRed67 · 05-07-2002, 12:48 PM

Well, after a while of looking around on Ebay, I spotted some Mr.Gasket brakets. So I went to napa and was able to get the 2 I needed to work with my headers. Thanks for the help and parts offer anyway though. The cool part is I now have my first 2 pieces of crome on the engine. I can really feel the horse power high up in the rpms now!

*Fast68Chevy* · 05-07-2002, 02:52 PM

chrome makes you go faster, and yellow also, the ricers know all about that

05-06-2002, 01:06 PM	#1
ViperRed67 Registered User Join Date: Apr 2002 Location: Holley, Oregon Posts: 32	Pics of 67 swp Altenator bracket needed I need to find and buy a set of Altenator brackets for my 67. I have the short water pump and no accesory holes in the heads. But, I do not know what they look like to spot some. Someone have a pic of the originals? I currently have a universal type and it flops all around. Please help.

05-06-2002, 02:45 PM	#5
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	I bought a 68 with headers and those brackets. Someone had fabbed an additional bracket to compensate for your situation. I may still have the homemade bracket and the OE brackets are on the way to me from Randy. Since my plans for the brackets have changed, I can sell you the whole setup if you'd like. ------------------ Jeff Jesseman Cheyenne Parts Northeast Franconia, NH 67 Chevy SWB Fleetside 70 GMC Burb 1/2 ton 2wd 72 Chevy Burb 3/4 ton 4x4 Parts bought and sold __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

05-06-2002, 08:07 PM	#9
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	e-mail me. Once I get Randy's I'll take a pic of the entire setup for you __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

05-06-2002, 01:11 PM	#2
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	i have some, go to ebay and searxh for chevy alternator brackets, they are both stamped steel in 65-68 and bolts ot front face nose of the driver exh ram horn, i have pics of this nose up close if needed, email for them can get pics of the brackets too. 65-68 driver ram horns are not same as pre65 and post68 ones thanks

05-06-2002, 01:14 PM	#3
ViperRed67 Registered User Join Date: Apr 2002 Location: Holley, Oregon Posts: 32	They bolt off the exhaust? I may be in trouble as I just swapped in headers!AAAAAHHH I need a break!

05-06-2002, 01:45 PM	#4
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	lol

05-06-2002, 03:51 PM	#6
ViperRed67 Registered User Join Date: Apr 2002 Location: Holley, Oregon Posts: 32	How much? I am interested

05-06-2002, 05:16 PM	#7
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	http://community.webshots.com/storag...7pjPHLG_ph.jpg http://community.webshots.com/storag...6KWazWY_ph.jpg [This message has been edited by Fast68Chevy (edited May 06, 2002).]

05-06-2002, 05:35 PM	#8
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	if CPNE doesnt have what you need after all for some odd reaosn then check here: http://cgi.ebay.com/ebaymotors/ws/eb...783682&r=0&t=0 http://cgi.ebay.com/ebaymotors/ws/eb...431777&r=0&t=0

05-07-2002, 12:48 PM	#10
ViperRed67 Registered User Join Date: Apr 2002 Location: Holley, Oregon Posts: 32	Well, after a while of looking around on Ebay, I spotted some Mr.Gasket brakets. So I went to napa and was able to get the 2 I needed to work with my headers. Thanks for the help and parts offer anyway though. The cool part is I now have my first 2 pieces of crome on the engine. I can really feel the horse power high up in the rpms now!

05-07-2002, 02:52 PM	#11
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	chrome makes you go faster, and yellow also, the ricers know all about that



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.