Late model seat ideas ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teamharvey · 03-19-2007, 07:41 PM

Hey, I am building this truck for my son and he asked me about different seats/center consoles. I am old school and would really like to keep the original bench. What have you seen work and what is nice ?

Thanks

KAILUAZ · 03-19-2007, 07:58 PM

These are out of a 2000 Chevy 1 ton, they basically bolted right in without having to do anything with the seat brackets.

dan42 · 03-20-2007, 08:41 PM

These are out of a '96 extended cab - needed to drill new holes. I took them out and put in a bench - too high for me.

**Palf70Step** · 03-20-2007, 08:54 PM

I have ergo buckets from a 97 C1500. I'll be using a console from a mid 80s Blazer/Suburban (can't find the picture of it though.)

drman929 · 03-20-2007, 09:41 PM

Hey Palf, how do those sit and what is your stature? TIA

**Palf70Step** · 03-21-2007, 05:11 AM

I am 6'1", about 175-180. They sit a bit higher than stock, but super comfortable. I don't get to use the up/down adjustment on the drivers side much as they are always on the lowest height setting, that is they will be if ever I get the truck back together.

vtblazer · 03-21-2007, 07:20 AM

Quote:

Originally Posted by KAILUAZ

These are out of a 2000 Chevy 1 ton, they basically bolted right in without having to do anything with the seat brackets.

Did you reuse an old set of truck bucket seat brackets or did the one ton seats bolt right up to the existing mounts?

What kind of bracing did you come up with under the front mounts to accomodate the built in shoulder harness set up?

AKChevyman · 03-21-2007, 07:39 AM

I have the same 2001 seats and I had to drill new holes and I reinforced the bottom of the cab with 16 gauge steel in the back and went a little over kill with 1/4 plate on the front.

spdrcr29 · 03-21-2007, 07:51 AM

Quote:

Originally Posted by teamharvey

I am old school and would really like to keep the original bench. What have you seen work and what is nice ?

Thanks

I was thinking about ditching the bench for all of about 1 minute, just because I wasn't seeing any reasonably priced seat skins that I liked (My apologies to the purists, but that tooled/engraved vinyl ain't me, and I don't like the houndstooth).
I found a place that made me this set of skins for about $200 out of vinyl, obviously, because of the price difference to get leather.

EAST SIDE LOW LIFE · 03-22-2007, 05:43 PM

I've really never come across late model seats that I felt looked like they belonged and I'm a guy that does not mind changing things. My truck had the tooled look & it was just a little to cow boy for me. But I like the look of a stock interior so I went the plain jane standard interior. I changed the door panels to the stock metal ones ($10.00 for the pr.) @ the wreckers. Tossed the worn out head liner and left it metal and took the bench and upholstered it in the same pattern as the roof. It looks like it belongs even though it never came this way.

esll.

**Already Gone** · 03-22-2007, 05:55 PM

I have these 2002 Chev Ext cab seats with the matching console sitting in my garage waiting to be installed. Driver and passenger seats are both power and will be replacing the bench in the attached pics. I really wanted the integrated shoulder belt seats for my truck.

bigo181979 · 03-22-2007, 10:53 PM

Quote:

Originally Posted by spdrcr29

I was thinking about ditching the bench for all of about 1 minute, just because I wasn't seeing any reasonably priced seat skins that I liked (My apologies to the purists, but that tooled/engraved vinyl ain't me, and I don't like the houndstooth).
I found a place that made me this set of skins for about $200 out of vinyl, obviously, because of the price difference to get leather.

spdrcr29 where did you get that cover at I want one like that but a bit different.

Spray-Bomb · 03-22-2007, 11:01 PM

I put the seat out of my dads 98 GMC 4-door in mine (came out of the rear, so it doesn't slide)

I haven't done the mounts for the rear yet, but it will be pretty easy

I'm 6' 3" & I think it sits a little high (but its only a inch taller than the stock one, & I thought the same thing about the stocker) I will get around to cutting it down in the future

vtblazer · 03-23-2007, 06:18 AM

Quote:

Originally Posted by Already Gone

I really wanted the integrated shoulder belt seats for my truck.

I did as well, right up until I actually installed 'em and drove around for a couple weeks.

IMHO, the back is to thick which makes you sit to close to the steering wheel.

Mods can be done, remove the tank so the seat can slide back or move the steering column closer to the dash to accommodate the new seats or even both but as far as being comfy without mods, it just didn't work for me.

*I hope everyone installing these integrated shoulder belt seats understands that the floors in these old trucks are not designed for these kind of safety restraints!!
The forces put on the front mounts are huge if you have a frontal impact and without modification the floor will give way and cantilever you right into the dash.

Sorry to be so grim but that's the facts.

I've had these style seats in both a '70 truck and a '72 burb and when I heard about this safety issue, I went back to using the stock lap belts instead of the integrated should belts.

**special-K** · 03-23-2007, 09:07 AM

My late model seat idea is stay with original seats designed to fit in these cabs.Upholstery shops can do anything you want with them.

dan42 · 03-23-2007, 09:29 AM

Quote:

Originally Posted by Spray-Bomb

I put the seat out of my dads 98 GMC 4-door in mine (came out of the rear, so it doesn't slide)

I haven't done the mounts for the rear yet, but it will be pretty easy

I'm 6' 3" & I think it sits a little high (but its only a inch taller than the stock one, & I thought the same thing about the stocker) I will get around to cutting it down in the future

http://i81.photobucket.com/albums/j223/903262/Bad%2067/2007_02170009.jpg[/IMG]

I cut 1 1/2 inches out of mine and its just right - I'm 6 foot -

Spray-Bomb · 03-23-2007, 09:30 AM

What kind of seat-belt option are there

Not trying to hijack

Spray-Bomb · 03-23-2007, 09:33 AM

Quote:

Originally Posted by dan42

I cut 1 1/2 inches out of mine and its just right - I'm 6 foot -

I plan to cut as much out as I can (prolly like 3-4 inches)

That way I'll be sitting a little closer to the middle of the window

But thats just me, maybe it's that extra 3" I have on ya

shifty · 03-23-2007, 10:16 AM

Just a safety issue that someone always brings up in the hundreds of threads about "what late model seats will fit" that come up every year:

If you are using a seat that has integrated seat belts, you need to reinforce the floor if you plan on using the belt that comes with it. If you do not, if you get in an accident, you're going to rip the seat out of the floor and you will be travelling through the windshield with it.

1lowdiesel · 03-23-2007, 11:01 AM

i'm doin the back seat out of my diesel and putting buckets in the back.

Bill72BB · 03-23-2007, 12:50 PM

Silverado 60/40

BigSky71 · 03-23-2007, 01:45 PM

Quote:

Originally Posted by vtblazer

IMHO, the back is to thick which makes you sit to close to the steering wheel.

I agree with that. These old cabs are not that roomy compared to the modern stuff and a bigger seat just takes up too much space for my tastes.

Besides how can you drive all laid back gangsta style [for us lowrider guys] when you are sitting up on top of the steering wheel?

Added; I am going to run the stock seat with a new red/black houndstooth cover, its at the uph. right now.

edmonton72 · 03-23-2007, 02:12 PM

Check out www.discountvantruck.com they have some nice seats. these are the ones I'm getting. There called the Knight Rider seats and they come with a mount that is made to fit your truck.

barn9 · 03-23-2007, 02:18 PM

I had mine recovered with this tweed, didn't like the vinyl after being in the sun in the summer.

shifty · 03-23-2007, 02:26 PM

Quote:

Originally Posted by edmonton72

Check out www.discountvantruck.com they have some nice seats. these are the ones I'm getting. There called the Knight Rider seats and they come with a mount that is made to fit your truck.

That's pretty cool, $45 for the adapter bracket. I would pay someone $100 right now for the brackets to adapt my '99 GM 1500/half-ton seats to my truck.

03-19-2007, 07:41 PM	#1
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	Late model seat ideas ? Hey, I am building this truck for my son and he asked me about different seats/center consoles. I am old school and would really like to keep the original bench. What have you seen work and what is nice ? Thanks __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

03-19-2007, 07:58 PM	#2
KAILUAZ King of Rust Join Date: Jul 2005 Location: St Petersburg, FL Posts: 359	Re: Late model seat ideas ? These are out of a 2000 Chevy 1 ton, they basically bolted right in without having to do anything with the seat brackets. __________________ 1970 GMC 2500, 350, TH400, front disks, thats it! My Pics

03-20-2007, 08:41 PM	#3
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Late model seat ideas ? These are out of a '96 extended cab - needed to drill new holes. I took them out and put in a bench - too high for me. Attached Images __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

03-20-2007, 08:54 PM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: Late model seat ideas ? I have ergo buckets from a 97 C1500. I'll be using a console from a mid 80s Blazer/Suburban (can't find the picture of it though.) Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-20-2007, 09:41 PM	#5
drman929 Registered User Join Date: Nov 2006 Location: Arkansas Posts: 232	Re: Late model seat ideas ? Hey Palf, how do those sit and what is your stature? TIA

03-21-2007, 05:11 AM	#6
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: Late model seat ideas ? I am 6'1", about 175-180. They sit a bit higher than stock, but super comfortable. I don't get to use the up/down adjustment on the drivers side much as they are always on the lowest height setting, that is they will be if ever I get the truck back together. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 03-21-2007 at 05:11 AM.

03-21-2007, 07:39 AM	#8
AKChevyman Chevy Forever Join Date: Jun 2005 Location: Dalzell SC Posts: 314	Re: Late model seat ideas ? I have the same 2001 seats and I had to drill new holes and I reinforced the bottom of the cab with 16 gauge steel in the back and went a little over kill with 1/4 plate on the front. Attached Images __________________ My first love 1971 C20 Hugger orange Getting face lift and heart transplant .30 402 BB /TH400 and GV Wifes car 1969 Chevelle SS 396 325hp/TH400 Factroy A/C Automatic w/ Floor shift console. restored.

03-22-2007, 05:43 PM	#10
EAST SIDE LOW LIFE Senior Member Join Date: Mar 2007 Location: VANCOUVER ISLAND, B.C., Canada Posts: 1,602	Re: Late model seat ideas ? I've really never come across late model seats that I felt looked like they belonged and I'm a guy that does not mind changing things. My truck had the tooled look & it was just a little to cow boy for me. But I like the look of a stock interior so I went the plain jane standard interior. I changed the door panels to the stock metal ones ($10.00 for the pr.) @ the wreckers. Tossed the worn out head liner and left it metal and took the bench and upholstered it in the same pattern as the roof. It looks like it belongs even though it never came this way. esll. Attached Images __________________ Tomorrow is for doing today's stuff. ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member) Last edited by EAST SIDE LOW LIFE; 03-22-2007 at 05:45 PM.

03-22-2007, 05:55 PM	#11
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: Late model seat ideas ? I have these 2002 Chev Ext cab seats with the matching console sitting in my garage waiting to be installed. Driver and passenger seats are both power and will be replacing the bench in the attached pics. I really wanted the integrated shoulder belt seats for my truck. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021 Last edited by Already Gone; 03-22-2007 at 05:59 PM.

03-22-2007, 11:01 PM	#13
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Late model seat ideas ? I put the seat out of my dads 98 GMC 4-door in mine (came out of the rear, so it doesn't slide) I haven't done the mounts for the rear yet, but it will be pretty easy I'm 6' 3" & I think it sits a little high (but its only a inch taller than the stock one, & I thought the same thing about the stocker) I will get around to cutting it down in the future __________________ Just not low enough... ----------------------------- Sinister Killer

03-23-2007, 09:07 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Late model seat ideas ? My late model seat idea is stay with original seats designed to fit in these cabs.Upholstery shops can do anything you want with them. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-23-2007, 09:30 AM	#17
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Late model seat ideas ? What kind of seat-belt option are there Not trying to hijack __________________ Just not low enough... ----------------------------- Sinister Killer

03-23-2007, 10:16 AM	#19
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: Late model seat ideas ? Just a safety issue that someone always brings up in the hundreds of threads about "what late model seats will fit" that come up every year: If you are using a seat that has integrated seat belts, you need to reinforce the floor if you plan on using the belt that comes with it. If you do not, if you get in an accident, you're going to rip the seat out of the floor and you will be travelling through the windshield with it. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-23-2007, 11:01 AM	#20
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: Late model seat ideas ? i'm doin the back seat out of my diesel and putting buckets in the back. __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

03-23-2007, 12:50 PM	#21
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	Re: Late model seat ideas ? Silverado 60/40 Attached Images __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,



Register or Log In To remove these advertisements.

03-23-2007, 02:12 PM	#23
edmonton72 Nothings as cool as my 72 Join Date: May 2005 Location: Edmonton, AB, Kanuckastan Posts: 181	Re: Late model seat ideas ? Check out www.discountvantruck.com they have some nice seats. these are the ones I'm getting. There called the Knight Rider seats and they come with a mount that is made to fit your truck. Attached Images __________________ 1972 C10 Longbox In the middle of body off restoration Rebuilt 355, turbo 400, 3.42 12-bolt Rolling chassis finally done and cab mounted. Now onto sanding, bondo and more sanding.

03-23-2007, 02:18 PM	#24
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Re: Late model seat ideas ? I had mine recovered with this tweed, didn't like the vinyl after being in the sun in the summer. __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

Register or Log In To remove these advertisements.