Quarter panels for a 72 blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pete&tom · 03-20-2007, 10:22 AM

Hello
I am new to this form so please forgive me if I am in the wrong place to ask this question. I have a 1972 blazer that I have owned since it rolled off the car carrier. My son and I are looking to restore it the problem is I cannot find quarter panels for it I need the complete panels that roll all the way up over under the cap. the cap has never been off but the quarters is rotted right alone the line were the roof meets the cap plus it has been hit in both quarters and the floor is rotted out. Dose any one know of a source for such parts. Any web site or contact will be appreciated greatly. I was told that at one time someone made a complete rear unit out of fiberglass, is this true. Also can I use quarters off a short bed pickup Thanks for all your help.
Pete

bobthecop · 03-20-2007, 10:24 AM

I don't have an answer, but welcome from Oklahoma

65-72 chevytoys · 03-20-2007, 12:01 PM

You can use a set of short wheel base fleetside truck fenders to get the top rail that you are looking for then you will have to match the front up with the back of the door pillar. The only reporduction parts from vendors that I know of are patch panels but do not have the top rail like you are looking for.

There are a lot of good vendors if you browse through here

http://67-72chevytrucks.com/links/browselinks.php?c=2

and

from St. Augustine, FL

Slick71 · 03-20-2007, 12:11 PM

Quote:

Originally Posted by pete&tom

Hello
I was told that at one time someone made a complete rear unit out of fiberglass, is this true. Pete

If your asking if someone made a complete fiberglass tub...I think the answer is YES....but it's not being made any longer.

krue · 03-20-2007, 12:14 PM

Welcome to the board from South Mississippi! You can try the vendors or subscribe and post a Wanted To Buy thread on the parts board (I've seen them for sale there before).

Chevyman63 · 03-20-2007, 12:59 PM

to the board from Michigan.

Good luck with your search for the fiberglass tub.

*72CSTC5* · 03-20-2007, 01:27 PM

cut down some short bedsides to fit. Leave the door jamb area of your Blazer in tact and then cut a couple of inches past that so you can over lap the new bedsides to that so you do not have to rebuild the door jamb. They make a tool where you can put a step in the panel

LUV2XCLR8 · 03-21-2007, 05:49 PM

1st

From West TN

2nd Keep an eye on Evil Bay they turn up more often that you think

pete&tom · 03-22-2007, 09:53 AM

Just as an update on the fiber glass tub I found the company that was going to produce it but because of lack of interest the company never finished the mold. Mybe now at this time if there was a big intrest they might consider making it I think they were ahead of there time what do you think.the company is http://www.usbody.com/. Jive them a call maybe they will consider doing it now.
Pete

vtblazer · 03-22-2007, 05:34 PM

Quote:

Originally Posted by pete&tom

Just as an update on the fiber glass tub I found the company that was going to produce it but because of lack of interest the company never finished the mold. Mybe now at this time if there was a big intrest they might consider making it I think they were ahead of there time what do you think.the company is http://www.usbody.com/. Jive them a call maybe they will consider doing it now.
Pete

I always thought they 'were' the company that once made it but no longger do.

03-20-2007, 10:22 AM	#1
pete&tom Registered User Join Date: Mar 2007 Location: south jersey Posts: 3	Quarter panels for a 72 blazer Hello I am new to this form so please forgive me if I am in the wrong place to ask this question. I have a 1972 blazer that I have owned since it rolled off the car carrier. My son and I are looking to restore it the problem is I cannot find quarter panels for it I need the complete panels that roll all the way up over under the cap. the cap has never been off but the quarters is rotted right alone the line were the roof meets the cap plus it has been hit in both quarters and the floor is rotted out. Dose any one know of a source for such parts. Any web site or contact will be appreciated greatly. I was told that at one time someone made a complete rear unit out of fiberglass, is this true. Also can I use quarters off a short bed pickup Thanks for all your help. Pete

03-20-2007, 10:24 AM	#2
bobthecop Senior Member Join Date: Nov 2006 Location: Yukon Oklahoma Posts: 2,647	Re: qQarter panels for a 72 blazer I don't have an answer, but welcome from Oklahoma __________________ Happiness is towing your "new" truck home. 1972 C-10 1982 GMC (parts truck??) 1969 c10 parts truck 1969 C-10 ( my sons) 1992 Silverado 4X4 (now the boys truck)(now mine again) 2002 Tarus (my wife loves that car)

03-20-2007, 12:01 PM	#3
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: qQarter panels for a 72 blazer You can use a set of short wheel base fleetside truck fenders to get the top rail that you are looking for then you will have to match the front up with the back of the door pillar. The only reporduction parts from vendors that I know of are patch panels but do not have the top rail like you are looking for. There are a lot of good vendors if you browse through here http://67-72chevytrucks.com/links/browselinks.php?c=2 and from St. Augustine, FL __________________ 2004 Chevy Silverado 1500LS SWB 5.3L 2004 Corvette Z16 #770 Wish I had not sold 72 blazer Last edited by 65-72 chevytoys; 03-20-2007 at 12:03 PM.

03-20-2007, 12:14 PM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: qQarter panels for a 72 blazer Welcome to the board from South Mississippi! You can try the vendors or subscribe and post a Wanted To Buy thread on the parts board (I've seen them for sale there before). __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-20-2007, 12:59 PM	#6
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: qQarter panels for a 72 blazer to the board from Michigan. Good luck with your search for the fiberglass tub. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

03-20-2007, 01:27 PM	#7
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: qQarter panels for a 72 blazer cut down some short bedsides to fit. Leave the door jamb area of your Blazer in tact and then cut a couple of inches past that so you can over lap the new bedsides to that so you do not have to rebuild the door jamb. They make a tool where you can put a step in the panel

03-21-2007, 05:49 PM	#8
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: qQarter panels for a 72 blazer 1st From West TN 2nd Keep an eye on Evil Bay they turn up more often that you think __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-22-2007, 09:53 AM	#9
pete&tom Registered User Join Date: Mar 2007 Location: south jersey Posts: 3	Re: Quarter panels for a 72 blazer Just as an update on the fiber glass tub I found the company that was going to produce it but because of lack of interest the company never finished the mold. Mybe now at this time if there was a big intrest they might consider making it I think they were ahead of there time what do you think.the company is http://www.usbody.com/. Jive them a call maybe they will consider doing it now. Pete



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.