Do I need this? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smbrouss70 · 05-06-2007, 10:21 PM

I bought my blazer with no doors and was planning on cutting down a set of truck doors to use. I know people have done this before, but I found something on ebay that I actually never knew existed. The question I have now, is do I need the plates like in this auction? or is it something that is kind of overkill on Chevy's part?

http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us

LUV2XCLR8 · 05-06-2007, 10:25 PM

YES, Blazers / Jimmys really DO need them for extra support

smbrouss70 · 05-06-2007, 10:30 PM

Thanks for the quick response Luv! It'll be on it's way to my house now. Now I just need to find one for the driver's side.

LUV2XCLR8 · 05-06-2007, 10:40 PM

No problemo

bouncytruck · 05-07-2007, 12:31 AM

They make repop Blazer doors now. I'm not sure if they have that piece on them or not though.

Blazer doors also have that little metal piece at the top. I"m not sure what it is called or what it does though.

smbrouss70 · 05-07-2007, 12:58 AM

Thanks Bouncy, I've heard mixed comments about re-pop doors, so I figured I'd save myself some money and use some truck doors that I have that are in good shape. I have found some of the little metal pieces that you are talking about if they are in fact like the picture below.

jcfoote60 · 05-08-2007, 07:39 AM

My LMC repops don't have them in fact they are not even pre-drilled for them. Goodmark's might be different and that wouldn't surprise me with the way these doors have fit so far it's a wonder the door latch holes are even there. I have a set of factory doors that need re-welded around where the hinges go on and some cracks around the vent assembly but I'm tempted to just put the time and effort into them instead of using my repops...the quality just sucks!

SeventyOne · 05-08-2007, 03:37 PM

Quote:

Originally Posted by jcfoote60

I have a set of factory doors that need re-welded around where the hinges go on and some cracks around the vent assembly but I'm tempted to just put the time and effort into them instead of using my repops...the quality just sucks!

Sounds just like my Blazer's driver door...

LUV2XCLR8 · 05-08-2007, 04:13 PM

Quote:

Originally Posted by smbrouss70

I have found some of the little metal pieces that you are talking about if they are in fact like the picture below.

Score, you needed those also

smbrouss70 · 05-08-2007, 04:40 PM

Is there anything else that I should know about Blazer doors? Anything that's different then truck doors, I mean.

**FRENCHBLUE72** · 05-08-2007, 09:34 PM

you dont need the door plates send them to me..... I still need a passenger side..

05-06-2007, 10:21 PM	#1
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Do I need this? I bought my blazer with no doors and was planning on cutting down a set of truck doors to use. I know people have done this before, but I found something on ebay that I actually never knew existed. The question I have now, is do I need the plates like in this auction? or is it something that is kind of overkill on Chevy's part? http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

05-06-2007, 10:25 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Do I need this? YES, Blazers / Jimmys really DO need them for extra support __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 05-06-2007 at 10:25 PM.

05-06-2007, 10:30 PM	#3
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: Do I need this? Thanks for the quick response Luv! It'll be on it's way to my house now. Now I just need to find one for the driver's side. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build Last edited by smbrouss70; 05-07-2007 at 12:00 AM.

05-06-2007, 10:40 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Do I need this? No problemo __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-07-2007, 12:31 AM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: Do I need this? They make repop Blazer doors now. I'm not sure if they have that piece on them or not though. Blazer doors also have that little metal piece at the top. I"m not sure what it is called or what it does though. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

05-07-2007, 12:58 AM	#6
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: Do I need this? Thanks Bouncy, I've heard mixed comments about re-pop doors, so I figured I'd save myself some money and use some truck doors that I have that are in good shape. I have found some of the little metal pieces that you are talking about if they are in fact like the picture below. Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

05-08-2007, 07:39 AM	#7
jcfoote60 Active Member Join Date: Jun 2005 Location: Idaho Posts: 263	Re: Do I need this? My LMC repops don't have them in fact they are not even pre-drilled for them. Goodmark's might be different and that wouldn't surprise me with the way these doors have fit so far it's a wonder the door latch holes are even there. I have a set of factory doors that need re-welded around where the hinges go on and some cracks around the vent assembly but I'm tempted to just put the time and effort into them instead of using my repops...the quality just sucks!

05-08-2007, 04:40 PM	#10
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: Do I need this? Is there anything else that I should know about Blazer doors? Anything that's different then truck doors, I mean. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

05-08-2007, 09:34 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,591	Re: Do I need this? you dont need the door plates send them to me..... I still need a passenger side.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.