Gas filler delete - is this stock??! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Psycho71 · 05-16-2007, 03:51 PM

I did a temporary fix on mine. Sorry no pics, but it's easy to imagine.

I took the old gasket, cut a piece of antifreeze jug to fit in the hole where the filler neck should be. Then siliconed it into the gasket. Then painted the whole thing black. And popped it right back in. It looks like it almost belongs there. And it'll be OK until this fall, when all the body work gets done.

If your specifically wanting the "deleted" look, then disregard this post. But for an easy fix, you might give it a try.

Jay

05-16-2007, 03:51 PM	#23
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: Gas filler delete - is this stock??! I did a temporary fix on mine. Sorry no pics, but it's easy to imagine. I took the old gasket, cut a piece of antifreeze jug to fit in the hole where the filler neck should be. Then siliconed it into the gasket. Then painted the whole thing black. And popped it right back in. It looks like it almost belongs there. And it'll be OK until this fall, when all the body work gets done. If your specifically wanting the "deleted" look, then disregard this post. But for an easy fix, you might give it a try. Jay __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.