can you say gaping hole?!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hewlett2002000 · 05-15-2007, 07:22 PM

i got a surprise today. i dident have anything to do and i remembered my trucks been smellin a bit moldy lately. it has(or had) carpet in it and ive never lifted it up other than to check for rust in the usual places. so i went out and took out my seat and took out the carpet, and i found a hole that the PO cut before he realized the shifter had to be farther back, but he never covered it, just put the carpet over it. theres some stupid people out there. take a look.

**slepysal** · 05-15-2007, 07:48 PM

Whoa thats one big hole !!

terrellautosports · 05-15-2007, 07:51 PM

wwwwwwwwoooooooowwwwwww!!!!!!!!!
that could have been a bad deal if your tranny had broke and come apart. you might be foot or feet less.

hewlett2002000 · 05-15-2007, 07:56 PM

tell me about it!! im gonna get my buddy to come over here and weld it up for me.

Volvo_Matt · 05-15-2007, 08:02 PM

I might have an extra floor panel if you need one

hewlett2002000 · 05-15-2007, 08:10 PM

that would be great, make it look better. im also looking for something like a rocker panel patch plate, if there is suck a thing. i have rot under my sill plates and i dont wanna replace the whole rockers for that little bit cause my inner and outer rockers and that spot right under the doors is fine. its just right there where the rubber goes under the sill plates.
thanks,
John

mbgmike · 05-16-2007, 06:42 PM

If your close to Houston I know where their is a real nice floor that would probably go cheap. Is actually the whole cab with the roof cut off. Sad cause the floor is real nice

jb4short · 05-16-2007, 07:23 PM

my dad had A/C vents like that in all his trucks....usually with cardboard duct-taped over them

**ChiefRocka** · 05-17-2007, 12:09 AM

Wow...I thought the Chief had a big hole in the floor

John

05-15-2007, 07:22 PM	#1
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	can you say gaping hole?!!!!! i got a surprise today. i dident have anything to do and i remembered my trucks been smellin a bit moldy lately. it has(or had) carpet in it and ive never lifted it up other than to check for rust in the usual places. so i went out and took out my seat and took out the carpet, and i found a hole that the PO cut before he realized the shifter had to be farther back, but he never covered it, just put the carpet over it. theres some stupid people out there. take a look. Attached Images __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

05-15-2007, 07:48 PM	#2
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: can you say gaping hole?!!!!! Whoa thats one big hole !!

05-15-2007, 07:51 PM	#3
terrellautosports New Member Join Date: Feb 2007 Location: s.w. missouri Posts: 176	Re: can you say gaping hole?!!!!! wwwwwwwwoooooooowwwwwww!!!!!!!!! that could have been a bad deal if your tranny had broke and come apart. you might be foot or feet less.

05-15-2007, 07:56 PM	#4
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: can you say gaping hole?!!!!! tell me about it!! im gonna get my buddy to come over here and weld it up for me. __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

05-15-2007, 08:02 PM	#5
Volvo_Matt Registered User Join Date: May 2007 Location: Hillsboro, OR Posts: 49	Re: can you say gaping hole?!!!!! I might have an extra floor panel if you need one

05-15-2007, 08:10 PM	#6
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: can you say gaping hole?!!!!! that would be great, make it look better. im also looking for something like a rocker panel patch plate, if there is suck a thing. i have rot under my sill plates and i dont wanna replace the whole rockers for that little bit cause my inner and outer rockers and that spot right under the doors is fine. its just right there where the rubber goes under the sill plates. thanks, John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

05-16-2007, 06:42 PM	#7
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: can you say gaping hole?!!!!! If your close to Houston I know where their is a real nice floor that would probably go cheap. Is actually the whole cab with the roof cut off. Sad cause the floor is real nice

05-16-2007, 07:23 PM	#8
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: can you say gaping hole?!!!!! my dad had A/C vents like that in all his trucks....usually with cardboard duct-taped over them

05-17-2007, 12:09 AM	#9
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: can you say gaping hole?!!!!! Wow...I thought the Chief had a big hole in the floor John __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.