2nd try Need a factory short 4x4 frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddyole 69 · 06-05-2007, 12:04 AM

Last one turned out to be a long bed shortened just need the frame and xmembers would be happy to consider a roller let me know what you have. I am willing to buy out right or trade parts thanks for looking at my post Mike

1969k10stepside · 06-05-2007, 12:10 AM

Good luck..They keep getting harder to find.I will keep an eye out in the junkyard for one for you though.Im going to a big junkyard at the end of this week or next.
I have one factory swb 4wd and thats enough for me! Now I'm after C30s,k20s,and K5s.

CrashEd · 06-05-2007, 12:45 AM

I still have mine. What you got to trade.
Ed

muddyole 69 · 06-05-2007, 05:28 AM

What do you need Ed ? I cannot cough up a big pile o cash but more than happy to come to some kind of agreement. I have truck camaro trans am fox body mustang and turbo coupe goodies as well as pretty much anything for a sbc have some 2 and 4 wheel trannies several 4x4 sets of 1/2 and 3/4 ton axles few sets of wheels and a lifetime collection of motorhead stuff

just let me know Mike

Also Thanks !! btw Dustin I appreciate you keeping me in mind Mike

vtblazer · 06-05-2007, 05:56 AM

Is VT to far for you to pick one up?

We have one out back that's just a frame.

CrashEd · 06-05-2007, 08:04 AM

I realy need a good set of performance heads for a sbc 64cc chambers somthing with acc holes.
Ed

otsenre · 06-06-2007, 10:59 PM

I know where 2 of them are, one is a bare frame, no suspension, no axles, 450.00, the other is on a 69 4x4 stepside, I will go see it Saturday, has suspension, axles, manual steering. Not sure on asking price yet

**special-K** · 06-07-2007, 07:11 AM

Just bring buy my `71 for $1,500

.

70rs/ss · 06-07-2007, 12:57 PM

You could fly out to AZ and buy my one of 1054 1967 short fleet 4X4, and drive it home? I wouldn't charge you a pile of money, unless you just want to give me it?!! I know you only want/need a frame, but you could always sell the parts you have for your project? Heck I'd even consider those 2 NOS Blazer bedsides as a partial trade

LMK

msgross · 06-07-2007, 05:30 PM

wish I would have known you were looking. I just watched a 68 K-10 SWB fleet one sell on Ebay for $1200 and it was located between us. We could have parted it....

muddyole 69 · 06-07-2007, 10:12 PM

msgross always my luck day late and a dollar short

70 rs/ss those bedsides are tucked away for a very special occasion

Tim shoot me some pics of the 1500 special no pun intended

Kurt I am really trying to avoid the drive due to fuel costs but have not dicounted yours yet thanks

otsenre I am thankful for your looking but the drive is not something I can do but if you come up with a price we may arrange a board member piggyback ride as people travel to and from maybe we could get it here over time ? thanks and let me know Mike

Ed I could probably come up with a set of heads the old camel humps are not hard to find they seem to be the non accessory holed ones around me pm me and we can cook something up Mike

Down south truckin · 06-07-2007, 10:23 PM

Mike i've got one here just N/E of Atlanta if your still coming down next month it's CHEAP and ROUGH!!

**special-K** · 06-08-2007, 09:11 PM

I just got a line on one less than 10 miles from me,yesterday.I`m planning on checking into it.

duallyjams · 06-08-2007, 10:04 PM

I have a 69 blazer4x4 frame and a 84 short fleet 4x4 frame in Md

**special-K** · 06-08-2007, 10:29 PM

^Hey bud,welcome from another Marylander.Deales a cool place.I haven`t rode down that way in a couple years...Shadyside,Tracy`s Landing,and of course ending up at Happy Harbor for food and beer.

muddyole 69 · 06-09-2007, 12:51 AM

Hey Tim let me know I am sure I can manage to slide the frame under the blaze for the trip home.

Down South when you say rough does it need repair or is it just flaky and nasty because a show truck is not the plan and I can live with pits etc as long as it is structurally sound let me know as I intend to come down your way late june early july thanks Mike

**special-K** · 06-09-2007, 09:05 PM

I went to look today.It`s either gone or was moved somewhere else.I`ll check into it when they`re open next week.

duallyjams · 06-10-2007, 08:14 AM

Yep i can throw a stone and hit happy harbor.Stumbled home a many a night.

msgross · 06-14-2007, 08:47 AM

that truck is for sale again on Ebay. it went for $1200 last time but someone must have backed out. I would be interested in parting it with you (you take frame/chassis and I take body/bed). I bet we could get it for cheaper......

http://cgi.ebay.com/ebaymotors/ws/eB...m=140128759656

1969k10stepside · 06-14-2007, 10:56 AM

Mike,that truck is identical to yours...
Be advised of the 67-68 frames VS 69-72 though.67-68s had different front and rear spring hangers and different rear leaf configurations.You are limited on lift kits to a point with them too.Its not a problem if you dont want to lift the truck,but if you do be aware of this.

msgross · 06-14-2007, 11:06 AM

shackle flip for the rear and new leafs for the front....

That truck is very close to mine, only difference is it's a 6 banger without tach. Says they changed trannies and the driveshaft is in the cab so it must have issues....

Husker · 06-14-2007, 06:27 PM

Not trying to hijack or anything, But Why would you part that truck out? Looks like a nice truck. Just wondering
Ron

msgross · 06-14-2007, 06:40 PM

Quote:

Originally Posted by Husker

Not trying to hijack or anything, But Why would you part that truck out? Looks like a nice truck. Just wondering
Ron

why not... he needs a frame and I need body parts, win/win situation...

I understand what you are saying though... It wwould also make mine just a tad more rare!

Down south truckin · 06-14-2007, 09:21 PM

Quote:

Originally Posted by muddyole 69

Hey Tim let me know I am sure I can manage to slide the frame under the blaze for the trip home.

Down South when you say rough does it need repair or is it just flaky and nasty because a show truck is not the plan and I can live with pits etc as long as it is structurally sound let me know as I intend to come down your way late june early july thanks Mike

Mike it's busted at the steering box it's a 68 and some of the crossmembers under the bed are rusted out it sat for along time with no bed i can get some pics over the weekend if you want thanks Mike

muddyole 69 · 06-14-2007, 11:53 PM

Down south gonna need pics

MS Gross what are you looking to spend if we split up the truck ?

Thanks for the info Dustin

cya Mike

06-05-2007, 12:04 AM	#1
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	2nd try Need a factory short 4x4 frame Last one turned out to be a long bed shortened just need the frame and xmembers would be happy to consider a roller let me know what you have. I am willing to buy out right or trade parts thanks for looking at my post Mike __________________ hav'n fun be'n me

06-05-2007, 12:10 AM	#2
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: 2nd try Need a factory short 4x4 frame Good luck..They keep getting harder to find.I will keep an eye out in the junkyard for one for you though.Im going to a big junkyard at the end of this week or next. I have one factory swb 4wd and thats enough for me! Now I'm after C30s,k20s,and K5s. Last edited by 1969k10stepside; 06-05-2007 at 12:10 AM.

06-05-2007, 12:45 AM	#3
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: 2nd try Need a factory short 4x4 frame I still have mine. What you got to trade. Ed

06-05-2007, 05:28 AM	#4
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: 2nd try Need a factory short 4x4 frame What do you need Ed ? I cannot cough up a big pile o cash but more than happy to come to some kind of agreement. I have truck camaro trans am fox body mustang and turbo coupe goodies as well as pretty much anything for a sbc have some 2 and 4 wheel trannies several 4x4 sets of 1/2 and 3/4 ton axles few sets of wheels and a lifetime collection of motorhead stuff just let me know Mike Also Thanks !! btw Dustin I appreciate you keeping me in mind Mike __________________ hav'n fun be'n me Last edited by muddyole 69; 06-05-2007 at 05:30 AM. Reason: props

06-05-2007, 05:56 AM	#5
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: 2nd try Need a factory short 4x4 frame Is VT to far for you to pick one up? We have one out back that's just a frame.

06-05-2007, 08:04 AM	#6
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: 2nd try Need a factory short 4x4 frame I realy need a good set of performance heads for a sbc 64cc chambers somthing with acc holes. Ed

06-06-2007, 10:59 PM	#7
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 2nd try Need a factory short 4x4 frame I know where 2 of them are, one is a bare frame, no suspension, no axles, 450.00, the other is on a 69 4x4 stepside, I will go see it Saturday, has suspension, axles, manual steering. Not sure on asking price yet

06-07-2007, 07:11 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 2nd try Need a factory short 4x4 frame Just bring buy my `71 for $1,500. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-07-2007, 12:57 PM	#9
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 2nd try Need a factory short 4x4 frame You could fly out to AZ and buy my one of 1054 1967 short fleet 4X4, and drive it home? I wouldn't charge you a pile of money, unless you just want to give me it?!! I know you only want/need a frame, but you could always sell the parts you have for your project? Heck I'd even consider those 2 NOS Blazer bedsides as a partial trade LMK

06-07-2007, 05:30 PM	#10
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 2nd try Need a factory short 4x4 frame wish I would have known you were looking. I just watched a 68 K-10 SWB fleet one sell on Ebay for $1200 and it was located between us. We could have parted it.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

06-07-2007, 10:12 PM	#11
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: 2nd try Need a factory short 4x4 frame msgross always my luck day late and a dollar short 70 rs/ss those bedsides are tucked away for a very special occasion Tim shoot me some pics of the 1500 special no pun intended Kurt I am really trying to avoid the drive due to fuel costs but have not dicounted yours yet thanks otsenre I am thankful for your looking but the drive is not something I can do but if you come up with a price we may arrange a board member piggyback ride as people travel to and from maybe we could get it here over time ? thanks and let me know Mike Ed I could probably come up with a set of heads the old camel humps are not hard to find they seem to be the non accessory holed ones around me pm me and we can cook something up Mike __________________ hav'n fun be'n me Last edited by muddyole 69; 06-07-2007 at 10:15 PM.

06-07-2007, 10:23 PM	#12
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 2nd try Need a factory short 4x4 frame Mike i've got one here just N/E of Atlanta if your still coming down next month it's CHEAP and ROUGH!!

06-08-2007, 09:11 PM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 2nd try Need a factory short 4x4 frame I just got a line on one less than 10 miles from me,yesterday.I`m planning on checking into it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-08-2007, 10:04 PM	#14
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 2nd try Need a factory short 4x4 frame I have a 69 blazer4x4 frame and a 84 short fleet 4x4 frame in Md __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

06-08-2007, 10:29 PM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 2nd try Need a factory short 4x4 frame ^Hey bud,welcome from another Marylander.Deales a cool place.I haven`t rode down that way in a couple years...Shadyside,Tracy`s Landing,and of course ending up at Happy Harbor for food and beer. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

06-09-2007, 12:51 AM	#16
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: 2nd try Need a factory short 4x4 frame Hey Tim let me know I am sure I can manage to slide the frame under the blaze for the trip home. Down South when you say rough does it need repair or is it just flaky and nasty because a show truck is not the plan and I can live with pits etc as long as it is structurally sound let me know as I intend to come down your way late june early july thanks Mike __________________ hav'n fun be'n me

06-09-2007, 09:05 PM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 2nd try Need a factory short 4x4 frame I went to look today.It`s either gone or was moved somewhere else.I`ll check into it when they`re open next week. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-10-2007, 08:14 AM	#18
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 2nd try Need a factory short 4x4 frame Yep i can throw a stone and hit happy harbor.Stumbled home a many a night. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

06-14-2007, 08:47 AM	#19
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 2nd try Need a factory short 4x4 frame that truck is for sale again on Ebay. it went for $1200 last time but someone must have backed out. I would be interested in parting it with you (you take frame/chassis and I take body/bed). I bet we could get it for cheaper...... http://cgi.ebay.com/ebaymotors/ws/eB...m=140128759656 __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

06-14-2007, 10:56 AM	#20
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: 2nd try Need a factory short 4x4 frame Mike,that truck is identical to yours... Be advised of the 67-68 frames VS 69-72 though.67-68s had different front and rear spring hangers and different rear leaf configurations.You are limited on lift kits to a point with them too.Its not a problem if you dont want to lift the truck,but if you do be aware of this. Last edited by 1969k10stepside; 06-14-2007 at 11:15 AM. Reason: spellin'

06-14-2007, 11:06 AM	#21
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 2nd try Need a factory short 4x4 frame shackle flip for the rear and new leafs for the front.... That truck is very close to mine, only difference is it's a 6 banger without tach. Says they changed trannies and the driveshaft is in the cab so it must have issues.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 06-14-2007 at 11:08 AM.

06-14-2007, 06:27 PM	#22
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: 2nd try Need a factory short 4x4 frame Not trying to hijack or anything, But Why would you part that truck out? Looks like a nice truck. Just wondering Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

06-14-2007, 11:53 PM	#25
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: 2nd try Need a factory short 4x4 frame Down south gonna need pics MS Gross what are you looking to spend if we split up the truck ? Thanks for the info Dustin cya Mike __________________ hav'n fun be'n me

Register or Log In To remove these advertisements.