Bed side lower supports for Fleet side - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prg machine · 08-26-2007, 09:09 PM

I have an excellent transplated long fleet bed on a K-20 that the PO found and put on the truck. What I need are pictures if possible and perhaps a measurement here or there.
The supports I am refering to are at the lower side of bed adjacent to the wheel well openings. There are holes down there but nothing is attatched. Kinda like the bed wasn't totaly finished. I am assuming they are like a 5/16 or 3/8 rod from the point I describe to somewhere on the frame to keep the lower sheetmetal from flapping in the breeze.

Any help would be great. I can fab it all up without any problem.

Thank you

OhioDan · 08-27-2007, 05:04 AM

Is this what you're talking about?

prg machine · 08-27-2007, 12:49 PM

Yes. I take it they are front of and behind the wheel?? also what diameter are the rods??
Thanks much. Makes since they would attatch to the box and not the frame.

Dano69c10 · 08-27-2007, 12:51 PM

The rods are used in front of the wheel, behind the wheel are the steel splash guards that also reinforce the bedside.
Dano

OhioDan · 08-28-2007, 05:07 AM

The rods are 1/4"-5/16". Not sure of the length. Mine are at my painters right now. Can't get exact dimensions for you. Hope this helps?

prg machine · 08-28-2007, 02:22 PM

I get it . The pictures show right and left sides of the truck in that order. I guess I am not sure if I have the splash pans either. Is there someone who could post a picture???

OhioDan · 08-28-2007, 04:03 PM

The rear splash gaurds look like this.

prg machine · 08-28-2007, 04:40 PM

Another part to try and find!!

08-26-2007, 09:09 PM	#1
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Bed side lower supports for Fleet side I have an excellent transplated long fleet bed on a K-20 that the PO found and put on the truck. What I need are pictures if possible and perhaps a measurement here or there. The supports I am refering to are at the lower side of bed adjacent to the wheel well openings. There are holes down there but nothing is attatched. Kinda like the bed wasn't totaly finished. I am assuming they are like a 5/16 or 3/8 rod from the point I describe to somewhere on the frame to keep the lower sheetmetal from flapping in the breeze. Any help would be great. I can fab it all up without any problem. Thank you

08-27-2007, 05:04 AM	#2
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Re: Bed side lower supports for Fleet side Is this what you're talking about? Attached Images __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

08-27-2007, 12:49 PM	#3
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Bed side lower supports for Fleet side Yes. I take it they are front of and behind the wheel?? also what diameter are the rods?? Thanks much. Makes since they would attatch to the box and not the frame.

08-27-2007, 12:51 PM	#4
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: Bed side lower supports for Fleet side The rods are used in front of the wheel, behind the wheel are the steel splash guards that also reinforce the bedside. Dano __________________ '69 Fleet It ain't yours, if you didn't build it!

08-28-2007, 05:07 AM	#5
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Re: Bed side lower supports for Fleet side The rods are 1/4"-5/16". Not sure of the length. Mine are at my painters right now. Can't get exact dimensions for you. Hope this helps? __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

08-28-2007, 02:22 PM	#6
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Bed side lower supports for Fleet side I get it . The pictures show right and left sides of the truck in that order. I guess I am not sure if I have the splash pans either. Is there someone who could post a picture???

08-28-2007, 04:03 PM	#7
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Re: Bed side lower supports for Fleet side The rear splash gaurds look like this. Attached Images __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

08-28-2007, 04:40 PM	#8
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Bed side lower supports for Fleet side Another part to try and find!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.