Rolling Frame and body Air Ride Mint!!!!!

[mkhutch]

Here is the bulk of my project and testing waters on this aspect of my project. Its a 67 body and frame. The frame has been blasted, painted charcoal grey, and cleared. The frame has ECE 2 in drop spindles with Air Ride Tech air ride suspension(bags installed only) with Level Pro control system with ART StrongArm upper and lower Tubular control arms. It also comes with Tubular motor mounts for a V8. The brakes have been upgraded all around with a 4 wheel disc conversion including e-brake with nickel washed cross drilled and slotted rotors. Comes with a standard trans crossmemebr as well as a ECE crossmember.

The rear end is a chevy 12 bolt that has been powder coated black and added a 3:73 Auburn posi-traction gear with new 5 lug axles.

The wheels are brand new Coys C-5 in 20"x8.5 with a 5 on 5 lug pattern. The wheels are polished with Hankook tires(0 miles).

The body is a standard 67 big window that has been cleaned up but still needs work. The cab has had the dash cut out and added a factory AC dash from a 72. The drip rails have been shaved as well as the fuel filler hole and the back seam above the glass. The front clip is in great condition. Very little work needed here. The front fenders were the only problem but new GM sheet metal has been purchased to replace this. The bed is in a 9 out of 10 shape as the steel floor needs a little work, no rust, just dings.

I don't have the pictures yet as I need to clean up the shop to take pics of the frame etc and the body is at my body guys shop. I'm really testing waters now to see if I can sell it as a whole truck or will need to part it out. I will take pics of certain areas as needed, just ask! Looking to get $12,000 OBO for the whole truck and all the parts.

Please comment on or about anything!

Thanks

Here are some pics now. Excuse the mess, shop is getting crowded!

[killer71]

If you decide to sell just the tires/wheels please let me know!

[mkhutch]

Could you pick up Killer71?

[killer71]

Originally Posted by mkhutch

Could you pick up Killer71?

Hmmm...I'll have to get permission but before i get permission how serious are ya?

[mkhutch]

I'm serious. I have a set of corvette rallies with the small cap I could put on there if needed.

[killer71]

And for the fun stuff, how much???

[mkhutch]

I have a little over $2000 in the setup. I would like to get as close to that as possible since they do have 0 miles on them. Lets say $1750.

[pcmcobra]

if you decide to part out, how much $ for the rear end?

[mkhutch]

Lets see what happens. I'll get back with you though if I do part.

Thanks for looking!

[Mike Massingill]

I am interested, please send some pictures.
Mike

[jlaird]

if you decide to part, put me in line for the lower control arms and rear disc brake setup.

[mkhutch]

Pics are now up. Thanks guys for looking!

[killer71]

still trying to get permission from the boss...whew this is gonna be harder than I thought!

[mkhutch]

You got to show her who the boss is

[killer71]

Hmm...how do i go about doin that???

do u know what the backspacing is off hand?

[mkhutch]

I believe it is 4.5"

[see ten]

When are the body pics coming?!

[mkhutch]

I'm trying to get with my body guy to get to his place and take some photos. It'll probably be this weekend.

[LUV2XCLR8]

Hmmmm, I'm having some thoughts about this one

[tenochiturbide]

are those all 20" wheels?

[mkhutch]

All 20's around on this one.

[mkhutch]

LUV2XCLR8, let the thoughts get to you. Come on down and take this girl home with you!!!!

[DMARCUM123]

how about a fuel tank

[mkhutch]

There is a 20gal(I believe or 18gal) custom made fuel tank mounted between the frame behind the rear end. When air'd out, the tabk sits about 1-1.5" off the ground.

[Deuce]

How much for the frame with the COYS rolling.....as is??