The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-10-2007, 10:40 PM   #1
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
How to tune up, or service engine?

Details: Goodwrench 350, 10 years old, 70K miles, Starts right up no problems there. Edelbrock Manifold, Rochester 4 barrel.




My trucks service engine light has been on a while, and I would like to know what all I need to do to get it to go off? I'd also like to know a good guide on tuning up my 350, I replaced all the fluids already, plug wires as well, and flushed the radiator, whats next? my truck seems kind of sluggish, it even hesitates sometimes when I push the gas off a stop, it almost stalls, in fact a few times it has and I would like to get it running a lot better, what would you recommend? [Fuel filter it clean, and Dist cap and rotor are fairly new] Thanks. EDIT- Heard that the EGR could be my problem, how do I determine if its gone bad?

PS, I had another problem today, I got on the freeway on a low tank of gas, started going up hill, and it died on me, I guess the fuel was low enough that the pump was not able to get any fuel on a count of I was going up hill, how can I aid this problem?
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/

Last edited by Rc 415; 09-10-2007 at 10:52 PM.
Rc 415 is offline   Reply With Quote
Old 09-10-2007, 10:41 PM   #2
Walts_restoration
Real Projects never die
 
Walts_restoration's Avatar
 
Join Date: Jan 2007
Location: Lawrence, kansas
Posts: 1,508
Re: How to tune up, or service engine?

to the running out of gas, dont be like my dad, if it gets low fill up just incase you need to go somewhere in a rush haha.
__________________
Ill put it this way, ive got a few lawn ornaments

My name tag says Ryan

KansasTwister On other forums
Walts_restoration is offline   Reply With Quote
Old 09-10-2007, 10:46 PM   #3
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
Re: How to tune up, or service engine?

haha the other tank was full thankfully, just had to pull off and start it back up on the other tank.
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/
Rc 415 is offline   Reply With Quote
Old 09-10-2007, 10:48 PM   #4
Bishops Trucks
KEEP ON TRUCKIN'
 
Bishops Trucks's Avatar
 
Join Date: Jun 2005
Location: Sterling, Va.
Posts: 5,730
Re: How to tune up, or service engine?

Change the plugs, Get a can of carb cleaner and spray that dirty carb all over. Spray it before you change the plugs and do it while it is running. You will have to work the linkage because it will want to stall out when you spray inside the carb but keep it going. When you are done with that, change the plugs, new distributor cap and rotor, air filter & fuel filter. All I can say about the gas issue is keep enough gas in it so it doesn't do that.
__________________
JIM
'97 GMC Sierra K1500
'95 Chevy Silverado C1500

'71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project
http://www.youtube.com/watch?v=4l689JKXPnA
http://67-72chevytrucks.com/vboard/payments.php
"LIVIN' FREE FOREVER"

Last edited by Bishops Trucks; 09-10-2007 at 10:49 PM.
Bishops Trucks is offline   Reply With Quote
Old 09-10-2007, 10:51 PM   #5
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
Re: How to tune up, or service engine?

I forgot to put, but the Dist cap and rotor are pretty new.
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/
Rc 415 is offline   Reply With Quote
Old 09-11-2007, 12:13 AM   #6
Malo83
Cruzzzn' Vet
 
Malo83's Avatar
 
Join Date: Jan 2005
Location: Porterville,Ca.
Posts: 1,918
Re: How to tune up, or service engine?

Quote:
Originally Posted by Bishops Trucks View Post
Change the plugs, Get a can of carb cleaner and spray that dirty carb all over. Spray it before you change the plugs and do it while it is running. You will have to work the linkage because it will want to stall out when you spray inside the carb but keep it going. When you are done with that, change the plugs, new distributor cap and rotor, air filter & fuel filter. All I can say about the gas issue is keep enough gas in it so it doesn't do that.
X2, that carb is NASTY when was the last time is was rebuilt or has it ever? you to have the computer read and see what trouble code is giving you the Check Engine Light, you need to buy or rent an ECM code reader that will tell you what is going on under the hood and it will plug into the connector under the dash next to the emergency brake handle, oh and to clear the light and memory on the Computer you need to remove the"ECM" fuse in the upper right hand corner of the fuse panel.

Malo83 is offline   Reply With Quote
Old 09-11-2007, 12:58 AM   #7
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
Re: How to tune up, or service engine?

Quote:
Originally Posted by Malo83 View Post
X2, that carb is NASTY when was the last time is was rebuilt or has it ever? you to have the computer read and see what trouble code is giving you the Check Engine Light, you need to buy or rent an ECM code reader that will tell you what is going on under the hood and it will plug into the connector under the dash next to the emergency brake handle, oh and to clear the light and memory on the Computer you need to remove the"ECM" fuse in the upper right hand corner of the fuse panel.
Probably never, It was originally on a 305 but it was traded for a 350 bout 10 years ago, I'm guessing they just swapped the carb over. I'll try and get that stuff and see whats going on, thanks.
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/
Rc 415 is offline   Reply With Quote
Old 09-14-2007, 03:05 PM   #8
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
Re: How to tune up, or service engine?

I just got some carb cleaner and it says not to spray it on the carb while its hot or running, because its flammable, what should I do?
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/
Rc 415 is offline   Reply With Quote
Old 09-14-2007, 03:28 PM   #9
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
Re: How to tune up, or service engine?

Quote:
Originally Posted by Rc 415 View Post
I just got some carb cleaner and it says not to spray it on the carb while its hot or running, because its flammable, what should I do?
Well I did it with the truck running anyway, it didn't do too much though, carb does not look any different, and it does not really run any better... I used the whole can too.
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/

Last edited by Rc 415; 09-14-2007 at 03:29 PM.
Rc 415 is offline   Reply With Quote
Old 09-14-2007, 04:41 PM   #10
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
Re: How to tune up, or service engine?

Heres a inside pic
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/
Rc 415 is offline   Reply With Quote
Old 09-14-2007, 10:02 PM   #11
Srubydo1986
The Crazy Machanic
 
Srubydo1986's Avatar
 
Join Date: Jan 2007
Location: Nokesville Va
Posts: 1,437
Re: How to tune up, or service engine?

haha the service engine light i love those things i had an 86 do that i found out how to make it go out..... I replaced the engine cause nothing else fixed it.

(yes the old engine was a 305 and well i had a 350 just sitting in the corner)
__________________
*1986 Sliverado longbed 400 small block mean as hell, 700r4 trans (5 speed coming one day)

* 1970 chevelle 2dr sedan Latest update June 24 2007.

*1957 4 door stationwagon - pink all original needing a good restore (body great, floors bad)

newest additions
1965 shortbed fleet great granddads. Been told im nuts to bring it back from the dead (still going to happen) plans-all stock with a turbo 292 inline 3 speed column shift. and thats it

big block 427 and 5 speed trans and ford 9 inch theyhave no home yet thinking what to put them in

and a 79 c60 trash truck um no idea i have one
Srubydo1986 is offline   Reply With Quote
Old 09-29-2007, 09:50 PM   #12
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
Re: How to tune up, or service engine?

Well i have sprayed the carb and got new plugs, but it still does it, what can it be?
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/
Rc 415 is offline   Reply With Quote
Old 09-29-2007, 10:20 PM   #13
PhilaTruck
Right on the line, baby!
 
PhilaTruck's Avatar
 
Join Date: Oct 2003
Location: Phila, PA 19130
Posts: 1,486
Re: How to tune up, or service engine?

Quote:
Originally Posted by Rc 415 View Post
EDIT- Heard that the EGR could be my problem, how do I determine if its gone bad?
Grab the top and twist it. If it turns, replace it. Warm up the engine and push up on the underside. RPM should drop, if not clean or replace it.

(I suggest getting a Chilton or a Haynes repair manual or better yet, a shop manual.)

When was the last time you checked the timing?

Did you replace the fuel filter or just observe that it was clean?

Change the oil and filter?

Malo83's pix have some good electrical connection shots for your other post.

Hope this helps-

-Todd
__________________
83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly

Click and scroll down for site vendors!

Subscribe here!
PhilaTruck is offline   Reply With Quote
Old 09-29-2007, 11:59 PM   #14
68GMC454
THE VILLIAGE IDIOT
 
68GMC454's Avatar
 
Join Date: Nov 2006
Location: Tooele, Utah
Posts: 1,405
Re: How to tune up, or service engine?

the best way i found out to get these lights to go out is to cover them up with a l;ittle piece of card board...you might want to see if the connections for the light are good and not corroded..
__________________
honestly honey,,i have no idea how that truck got here.
68GMC454 is offline   Reply With Quote
Old 09-30-2007, 06:34 AM   #15
Morgsie
Registered User
 
Join Date: Apr 2005
Location: BC, Canada
Posts: 122
Re: How to tune up, or service engine?

Quote:
Originally Posted by 68GMC454 View Post
the best way i found out to get these lights to go out is to cover them up with a l;ittle piece of card board...
Why not just pull the bulb if you're going to all that trouble
Morgsie is offline   Reply With Quote
Old 09-30-2007, 08:07 AM   #16
MylilBowTie
Right turn Clyde
 
MylilBowTie's Avatar
 
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
Re: How to tune up, or service engine?

You don't need a computer to read the codes. You jumper port A and B with the ignition in to the on position. Do not start the truck with the jumper in place. It can mess up the ecm.
Attached Images
 
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73
1992 Camaro RS 305 TBI
MylilBowTie is offline   Reply With Quote
Old 09-30-2007, 11:15 AM   #17
PhilaTruck
Right on the line, baby!
 
PhilaTruck's Avatar
 
Join Date: Oct 2003
Location: Phila, PA 19130
Posts: 1,486
Re: How to tune up, or service engine?

Nice work-around MylilBowtie! I ended up pulling the ECM from my 83. It controlled only the alternator.

RC, I hope you get the performance you're looking for-

-Todd
__________________
83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly

Click and scroll down for site vendors!

Subscribe here!
PhilaTruck is offline   Reply With Quote
Old 09-30-2007, 02:00 PM   #18
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
Re: How to tune up, or service engine?

Ok I connected port a and b, turned the ignition on but didnt start the truck, and all I get is a clicking coming from the carb, and this light starts blinking (what light is this and where is it supposed to go? it was just hanging behind my gauge cluster):
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/

Last edited by Rc 415; 09-30-2007 at 02:27 PM.
Rc 415 is offline   Reply With Quote
Old 09-30-2007, 03:07 PM   #19
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
Re: How to tune up, or service engine?

Where is the ecm code supposed to show up??
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/
Rc 415 is offline   Reply With Quote
Old 09-30-2007, 05:40 PM   #20
MylilBowTie
Right turn Clyde
 
MylilBowTie's Avatar
 
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
Re: How to tune up, or service engine?

The blinking light should be. It should flash all the codes three times. It will show a code 12 (blink once... blink twice) and then it start the rest of the codes. You will have to watch the blinking sequence to get the number of the code. If you mess up it will start all over again with 12 and then the other codes.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73
1992 Camaro RS 305 TBI
MylilBowTie is offline   Reply With Quote
Old 09-30-2007, 05:45 PM   #21
MylilBowTie
Right turn Clyde
 
MylilBowTie's Avatar
 
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
Re: How to tune up, or service engine?

I pretty sure that blinking light goes into the gauge cluster. It should illuminate the check engine light. You can use a flash light on the back of the gauges. That will light it up and show you where the to put it.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73
1992 Camaro RS 305 TBI
MylilBowTie is offline   Reply With Quote
Old 09-30-2007, 05:55 PM   #22
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
Re: How to tune up, or service engine?

Ok, I went to count the blinking again, and this time it just does 12 over and over again, it was doing other ones before i removed the ecm fuse for a few minutes, how do I get those back? The service engine light still stays on, but no codes blink except for 12.
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/
Rc 415 is offline   Reply With Quote
Old 09-30-2007, 06:10 PM   #23
MylilBowTie
Right turn Clyde
 
MylilBowTie's Avatar
 
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
Re: How to tune up, or service engine?

Those codes are lost now. It will need to be driven and see if the check engine light comes back on. If it does it should store the code. But if the ECM fuse is pulled or if the battery is disconnected it will erase it.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73
1992 Camaro RS 305 TBI
MylilBowTie is offline   Reply With Quote
Old 09-30-2007, 06:45 PM   #24
Rc 415
Flat Black, & Chrome!
 
Rc 415's Avatar
 
Join Date: Jan 2007
Location: San Francisco
Posts: 852
Re: How to tune up, or service engine?

Thats the thing the check engine light is still on but 12 is the only code that flashes
__________________
1983 Chevy C10 Stepside Sold
http://s69.photobucket.com/albums/i76/rc_415/
Rc 415 is offline   Reply With Quote
Old 09-30-2007, 06:58 PM   #25
MylilBowTie
Right turn Clyde
 
MylilBowTie's Avatar
 
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
Re: How to tune up, or service engine?

Did you take the jumper out?
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73
1992 Camaro RS 305 TBI
MylilBowTie is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com