i will be parting out this 71 gmc in sw va. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 10-10-2007, 10:44 PM

rad.,eng.,trans.,driveline,trans. crossmember,& bear cab have been spoken for if you see anything else you may need/want let me no and i will give you a price.

billsbowtie · 10-10-2007, 10:44 PM

billsbowtie · 10-10-2007, 10:45 PM

billsbowtie · 10-10-2007, 10:46 PM

drivers side mirror and hub caps and tailgate have been sold.

BCOWANWHEELS · 10-10-2007, 10:49 PM

wiper motor if good wiper arms if nice , and wiper linkage.just stockin up bill.
bob

billsbowtie · 10-10-2007, 10:56 PM

ok bob wiper stuff is yours.

724x4a/cchevy · 10-10-2007, 11:15 PM

I'm interested in the brake lights.
Justin

billsbowtie · 10-10-2007, 11:52 PM

justin how about $35.00 shipped for the lights,brackets,pigtails ?

old fart · 10-11-2007, 01:49 AM

I need a drivers door shipped to NH 03031. Thanks, Bill
Let me know how much

72armyswbtruck · 10-11-2007, 03:11 AM

How much for the hubcaps? And are they 3/4 ton? Shipped to 83687

hughnews1 · 10-11-2007, 06:20 AM

hey Bill how is the grill ?

Chevyman63 · 10-11-2007, 06:22 AM

Are the inner fenders any good? If so how much shipped to 48867?
Thanks.

*1972Ryan* · 10-11-2007, 06:24 AM

whats the grille like and the price?

*1972Ryan* · 10-11-2007, 06:24 AM

back fenders also?

Peter82 · 10-11-2007, 10:47 AM

i could use the doors i have a 71 c-10 shortbed. u think they would fit? how much?

Peter82 · 10-11-2007, 10:49 AM

Quote:

Originally Posted by Peter82

i could use the doors i have a 71 c-10 shortbed. u think they would fit? how much?

and the wiper arms. mine are kinda broke. ugh

bossrod · 10-11-2007, 11:33 AM

Will you be taking the front end off this vehicle? I believe the lower control arms are the same as on a chev c-10 and I am interested in the driver's side lower conrol arm.

Jim

Huskerboy2 · 10-11-2007, 12:09 PM

Doesn't look too bad overall. Too bad somebody doesn't grab that up whole and get it back on the road.

billsbowtie · 10-11-2007, 02:20 PM

old fart drivers door is ok for a daily driver $50.00 pass. door has some rust outer bottom just a door to get by with $30.00. but i don't ship parts this big it would cost more for shipping that it's worth anyway .
justin the brake lights are after market so i don't think they would help you.
72army caps have been sold.
hughnews1 grille is ok driver shape $50.00 but it would cost to much to ship local pickup on grille.
chevyman63 inner fenders are bad i do have a good used drivers inner fender for $50.00 but it would cost another $50.00 for shipping.
1972 ryan grille is driver shape $50.00 i don't want to price rear fenders till i get them off pass. side is very good shape driver needs a little work on the lip. did you sale that cowl hood ?
peter82 i don't ship doors bob has spoke for these wiper parts but i think i have some more $10.00 for wipers and $7.50 for shipping. i will get you a pic. if you are interested.
bossrod i will be useing those parts on my truck but i think i have and extra one i will check and if i do i will get you a pic. $25.00 for part and $15.00 for shipping.
huskerboy2 i have been trying to sale it hole for 2 months no luck.

billsbowtie · 10-11-2007, 02:49 PM

here are theafter market tail lights ,brackets,pigtails $35.00 shipped justin passed on them he thought they were orgi.

billsbowtie · 10-11-2007, 02:50 PM

grille

billsbowtie · 10-11-2007, 02:51 PM

spare tire carrier $50.00 shipped.

billsbowtie · 10-11-2007, 02:52 PM

good driver shape gauge type dash bezel $25.00 picked up or $40.00 shipped.

billsbowtie · 10-11-2007, 02:53 PM

Dad's Truck · 10-11-2007, 03:45 PM

Price for the bed? Will if fit on a 68 stepside?

Bob

10-10-2007, 10:44 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i will be parting out this 71 gmc in sw va. rad.,eng.,trans.,driveline,trans. crossmember,& bear cab have been spoken for if you see anything else you may need/want let me no and i will give you a price. __________________ i have 67/72 chevy truck parts f/s.

10-10-2007, 10:44 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: i will be parting out this 71 gmc in sw va. __________________ i have 67/72 chevy truck parts f/s.

10-10-2007, 10:45 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: i will be parting out this 71 gmc in sw va. __________________ i have 67/72 chevy truck parts f/s.

10-10-2007, 10:46 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: i will be parting out this 71 gmc in sw va. drivers side mirror and hub caps and tailgate have been sold. __________________ i have 67/72 chevy truck parts f/s.

10-10-2007, 10:49 PM	#5
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: i will be parting out this 71 gmc in sw va. wiper motor if good wiper arms if nice , and wiper linkage.just stockin up bill. bob __________________ I BELIEVE IN JOHN 3:16

10-10-2007, 10:56 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: i will be parting out this 71 gmc in sw va. ok bob wiper stuff is yours. __________________ i have 67/72 chevy truck parts f/s.

10-10-2007, 11:15 PM	#7
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: i will be parting out this 71 gmc in sw va. I'm interested in the brake lights. Justin __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor Last edited by 724x4a/cchevy; 10-10-2007 at 11:16 PM.

10-10-2007, 11:52 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: i will be parting out this 71 gmc in sw va. justin how about $35.00 shipped for the lights,brackets,pigtails ? __________________ i have 67/72 chevy truck parts f/s.

10-11-2007, 01:49 AM	#9
old fart Registered User Join Date: Oct 2007 Location: Amherst, NH Posts: 37	Re: i will be parting out this 71 gmc in sw va. I need a drivers door shipped to NH 03031. Thanks, Bill Let me know how much __________________ 1970 k10 1967 C10 parts truck

10-11-2007, 03:11 AM	#10
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: i will be parting out this 71 gmc in sw va. How much for the hubcaps? And are they 3/4 ton? Shipped to 83687 __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

10-11-2007, 06:20 AM	#11
hughnews1 Registered User Join Date: Apr 2002 Location: Hudson FL gulf coast Posts: 624	Re: i will be parting out this 71 gmc in sw va. hey Bill how is the grill ?

10-11-2007, 06:22 AM	#12
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: i will be parting out this 71 gmc in sw va. Are the inner fenders any good? If so how much shipped to 48867? Thanks. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

10-11-2007, 06:24 AM	#13
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: i will be parting out this 71 gmc in sw va. whats the grille like and the price?

10-11-2007, 10:47 AM	#15
Peter82 Everything is Custom Join Date: Aug 2007 Location: Blairsville, PA Posts: 85	Re: i will be parting out this 71 gmc in sw va. i could use the doors i have a 71 c-10 shortbed. u think they would fit? how much?

10-11-2007, 11:33 AM	#17
bossrod Registered User Join Date: Feb 2004 Location: Groton, CT Posts: 168	Re: i will be parting out this 71 gmc in sw va. Will you be taking the front end off this vehicle? I believe the lower control arms are the same as on a chev c-10 and I am interested in the driver's side lower conrol arm. Jim



Register or Log In To remove these advertisements.

10-11-2007, 12:09 PM	#18
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: i will be parting out this 71 gmc in sw va. Doesn't look too bad overall. Too bad somebody doesn't grab that up whole and get it back on the road. __________________ '72 Chevy Blazer

10-11-2007, 02:20 PM	#19
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: i will be parting out this 71 gmc in sw va. old fart drivers door is ok for a daily driver $50.00 pass. door has some rust outer bottom just a door to get by with $30.00. but i don't ship parts this big it would cost more for shipping that it's worth anyway . justin the brake lights are after market so i don't think they would help you. 72army caps have been sold. hughnews1 grille is ok driver shape $50.00 but it would cost to much to ship local pickup on grille. chevyman63 inner fenders are bad i do have a good used drivers inner fender for $50.00 but it would cost another $50.00 for shipping. 1972 ryan grille is driver shape $50.00 i don't want to price rear fenders till i get them off pass. side is very good shape driver needs a little work on the lip. did you sale that cowl hood ? peter82 i don't ship doors bob has spoke for these wiper parts but i think i have some more $10.00 for wipers and $7.50 for shipping. i will get you a pic. if you are interested. bossrod i will be useing those parts on my truck but i think i have and extra one i will check and if i do i will get you a pic. $25.00 for part and $15.00 for shipping. huskerboy2 i have been trying to sale it hole for 2 months no luck. __________________ i have 67/72 chevy truck parts f/s.

10-11-2007, 02:49 PM	#20
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: i will be parting out this 71 gmc in sw va. here are theafter market tail lights ,brackets,pigtails $35.00 shipped justin passed on them he thought they were orgi. __________________ i have 67/72 chevy truck parts f/s.

10-11-2007, 02:50 PM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: i will be parting out this 71 gmc in sw va. grille __________________ i have 67/72 chevy truck parts f/s.

10-11-2007, 02:51 PM	#22
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: i will be parting out this 71 gmc in sw va. spare tire carrier $50.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

10-11-2007, 02:52 PM	#23
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: i will be parting out this 71 gmc in sw va. good driver shape gauge type dash bezel $25.00 picked up or $40.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

10-11-2007, 02:53 PM	#24
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: i will be parting out this 71 gmc in sw va. __________________ i have 67/72 chevy truck parts f/s.

10-11-2007, 03:45 PM	#25
Dad's Truck Registered User Join Date: Jul 2007 Location: cincinnati, OH Posts: 39	Re: i will be parting out this 71 gmc in sw va. Price for the bed? Will if fit on a 68 stepside? Bob

Register or Log In To remove these advertisements.