brake/master cyclinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dadsredwagon · 10-17-2007, 09:53 PM

My pedal on the master cyclinder travel halfway to the floor I installed two new front wheel cyclinders, bled brakes just not having good pedal , I was looking at auto zone the sell a booster mastercyclinder and othere here said something about adding a dual master cyclinder non booster from a 70's model. Looking for direction?

Thx

Greg63 · 10-17-2007, 11:00 PM

I added a non booster master from a '76 half ton . I needed to add the proportioning valve as well , but once the new lines were run , it brakes pretty good for a 4 wheel drum system .
Greg

Stepside65 · 10-17-2007, 11:19 PM

Had same problem with my GMC Replaced it with the same style master cylinder and works like a charm. I couldn't push the brake to the floor if i had to...

**Chevy Fleetside** · 10-18-2007, 10:23 AM

Are the brakes adjusted properly? If they are not it will give you alot of brake pedal travel..

Dadsredwagon · 10-18-2007, 09:18 PM

brakes adjusted by tighten then back out until wheel brarely drags? correct

**Chevy Fleetside** · 10-18-2007, 09:28 PM

Quote:

Originally Posted by Dadsredwagon

brakes adjusted by tighten then back out until wheel brarely drags? correct

yep

Dadsredwagon · 10-18-2007, 09:31 PM

thx

10-17-2007, 09:53 PM	#1
Dadsredwagon Registered User Join Date: Aug 2006 Location: Spring,TX Posts: 342	brake/master cyclinder My pedal on the master cyclinder travel halfway to the floor I installed two new front wheel cyclinders, bled brakes just not having good pedal , I was looking at auto zone the sell a booster mastercyclinder and othere here said something about adding a dual master cyclinder non booster from a 70's model. Looking for direction? Thx

10-17-2007, 11:00 PM	#2
Greg63 Enjoy your truck Join Date: Oct 2007 Location: Newmarket, Ontario, Canada Posts: 1,066	Re: brake/master cyclinder I added a non booster master from a '76 half ton . I needed to add the proportioning valve as well , but once the new lines were run , it brakes pretty good for a 4 wheel drum system . Greg __________________ 1 Corinthians 10:13 1963 Chevrolet 1/2 ton 2010 Camaro SS/RS 2014 Jeep Grand Cherokee 2016 Jeep Cherokee

10-17-2007, 11:19 PM	#3
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: brake/master cyclinder Had same problem with my GMC Replaced it with the same style master cylinder and works like a charm. I couldn't push the brake to the floor if i had to... __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor

10-18-2007, 10:23 AM	#4
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,779	Re: brake/master cyclinder Are the brakes adjusted properly? If they are not it will give you alot of brake pedal travel.. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

10-18-2007, 09:18 PM	#5
Dadsredwagon Registered User Join Date: Aug 2006 Location: Spring,TX Posts: 342	Re: brake/master cyclinder brakes adjusted by tighten then back out until wheel brarely drags? correct

10-18-2007, 09:31 PM	#7
Dadsredwagon Registered User Join Date: Aug 2006 Location: Spring,TX Posts: 342	Re: brake/master cyclinder thx



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.