left rear fender for a stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brock · 11-02-2007, 01:11 PM

I'm needing a driver's side rear fender for a 68 stepside. I'd prefer one close to Western KY so I wouldn't have to pay that much for shipping. I have all of the braces and bolts. When I bought my truck the fenders where in the bed and the passenger side was fine but driver's was flange-less...I might have some trade items if interested. I'm pulling the 292? I-6 (doesn't have carb, fuelpump, maybe a couple other things), the 3-speed manual tranny (don't know if it works), non-tilt steering column 3OTT (no wheel and shifter handle gone)

**CPNE** · 11-02-2007, 01:21 PM

Can't help with the fender but I'd be interested in purchasing outright the I6 292 engine stands if it's a 2wd truck and you're not reinstalling the 292.

Brock · 11-02-2007, 02:27 PM

I'm gonna drop a SB V8 back in it...are they required for that? And it might be a while before I pull the engine because I'm having ACL reconstruction and MCL reattachment surgery in the morning. But I might be able to convince my Brother-in-law to pull it if you are in a hurry.

B

**CPNE** · 11-02-2007, 05:01 PM

Yes small block stands are different. I have a pair of small block stands if you want to trade even. Just need these to be 292 stands, not the 250 I6 variety. 292 stands are offset, where 250 stands are directly across from each other. If this is a 292 engine and you want to trade let me know.

Brock · 11-05-2007, 08:34 AM

Sounds like a deal...I'll check and make sure they are the 292...that was the first thing my DAD said when we popped the hood "HMMM thats a 292". He's 80 years old and got a touch of Alzheimers but he can remember working on these things for 20 of those 80 years, So I trust that he's right.

OJOE · 11-05-2007, 05:56 PM

have left and right sides. in montgomery, al if you get this way. 250.00 each or 400.00 for the pair. real nice condition.

11-02-2007, 01:11 PM	#1
Brock upgrading to an older model Join Date: Aug 2007 Location: Sacramento, KY Posts: 346	left rear fender for a stepside I'm needing a driver's side rear fender for a 68 stepside. I'd prefer one close to Western KY so I wouldn't have to pay that much for shipping. I have all of the braces and bolts. When I bought my truck the fenders where in the bed and the passenger side was fine but driver's was flange-less...I might have some trade items if interested. I'm pulling the 292? I-6 (doesn't have carb, fuelpump, maybe a couple other things), the 3-speed manual tranny (don't know if it works), non-tilt steering column 3OTT (no wheel and shifter handle gone) __________________ 68 stepside, short-box, multi-colored (for now)

11-02-2007, 01:21 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: left rear fender for a stepside Can't help with the fender but I'd be interested in purchasing outright the I6 292 engine stands if it's a 2wd truck and you're not reinstalling the 292. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

11-02-2007, 02:27 PM	#3
Brock upgrading to an older model Join Date: Aug 2007 Location: Sacramento, KY Posts: 346	Re: left rear fender for a stepside I'm gonna drop a SB V8 back in it...are they required for that? And it might be a while before I pull the engine because I'm having ACL reconstruction and MCL reattachment surgery in the morning. But I might be able to convince my Brother-in-law to pull it if you are in a hurry. B __________________ 68 stepside, short-box, multi-colored (for now)

11-02-2007, 05:01 PM	#4
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: left rear fender for a stepside Yes small block stands are different. I have a pair of small block stands if you want to trade even. Just need these to be 292 stands, not the 250 I6 variety. 292 stands are offset, where 250 stands are directly across from each other. If this is a 292 engine and you want to trade let me know. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

11-05-2007, 08:34 AM	#5
Brock upgrading to an older model Join Date: Aug 2007 Location: Sacramento, KY Posts: 346	Re: left rear fender for a stepside Sounds like a deal...I'll check and make sure they are the 292...that was the first thing my DAD said when we popped the hood "HMMM thats a 292". He's 80 years old and got a touch of Alzheimers but he can remember working on these things for 20 of those 80 years, So I trust that he's right. __________________ 68 stepside, short-box, multi-colored (for now)

11-05-2007, 05:56 PM	#6
OJOE Crew Cut Join Date: Dec 2005 Location: MONTGOMERY,AL Posts: 757	Re: left rear fender for a stepside have left and right sides. in montgomery, al if you get this way. 250.00 each or 400.00 for the pair. real nice condition. __________________ 85 SWB 1/2 TON CREWCAB/5.3 03 CHEV 3500 DURAMAX CREW CAB 85 CHEV SWB/TPI 06 CHEV TAHOE (WIFES) 30 MODEL A HOT ROD 07 HARLEY DAVIDSON BAGGER 09 STREET GLIDE AN D A LOT MORE JUNK



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.