|
11-15-2007, 12:39 AM
|
#1 |
|
Registered User
Join Date: Dec 2004
Location: Saskatchewan, Canada
Posts: 1,371
|
Seat Belt bolt holes?
I need a small favor from someone. I had to replace so much of my floor, that somewhere in the shuffle I forgot to put in seat belt holes. I have the ones for the center belt and inner buckles, but I need the ones for the outer driver passennger parts. Can someone please measure from the back of the cab wall and from the door weatherstrip or something for me please? Thanks!
__________________
1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open |
|
|
|
11-15-2007, 06:47 AM
|
#2 |
|
sufficiently talented fool
 
Join Date: Jun 2006
Location: Forest Hill, MD
Posts: 2,231
|
Re: Seat Belt bolt holes?
The seat belt bolts to the rear cab support. There is a welded nut on the front edge of the support. Look underneath the floor and punch the hole from the bottom.
__________________
"it's impossible to be surrounded by idiots when you are part of the circle"  2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board |
|
|
|
|
11-15-2007, 10:52 AM
|
#3 |
|
On the fast track to nowhere..
Join Date: May 2006
Location: Splendora, Texas
Posts: 5,316
|
Re: Seat Belt bolt holes?
 that's how I did my last set.
__________________
-Mike Owen- Norwood, Houston, Cecilia, Jackson, Monroe and counting |
|
|
|
|
11-15-2007, 04:08 PM
|
#4 |
|
Registered User
Join Date: Dec 2004
Location: Saskatchewan, Canada
Posts: 1,371
|
Re: Seat Belt bolt holes?
I replaced the floor and the rear cab supports, so right now there is nothing... The nut was actually broken off originally from rust.
__________________
1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open |
|
|
|
|
11-15-2007, 04:19 PM
|
#5 |
|
On the fast track to nowhere..
Join Date: May 2006
Location: Splendora, Texas
Posts: 5,316
|
Re: Seat Belt bolt holes?
OIC. If no one else does it I'll measure mine when I get home.
__________________
-Mike Owen- Norwood, Houston, Cecilia, Jackson, Monroe and counting |
|
|
|
|
11-15-2007, 06:41 PM
|
#6 |
|
On the fast track to nowhere..
Join Date: May 2006
Location: Splendora, Texas
Posts: 5,316
|
Re: Seat Belt bolt holes?
OK. Mine are 6 3/4" from the back wall and 2" from the inside of the weatherstrip flange, both sides.
__________________
-Mike Owen- Norwood, Houston, Cecilia, Jackson, Monroe and counting |
|
|
|
|
11-16-2007, 12:46 AM
|
#7 |
|
Registered User
Join Date: Dec 2004
Location: Saskatchewan, Canada
Posts: 1,371
|
Re: Seat Belt bolt holes?
Thanks man! That's in the area I figured, but now I know for sure. Carpet will go in ASAP now.
__________________
1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
