Help - 72 K20 replace under dash harness - The 1947 - Present Chevrolet & GMC Truck Message Board Network

montyrobison · 12-07-2007, 11:04 AM

Hi again,

I should have brought this up in my previous post. I'm also having to replace my under dash wiring harness. Any more words of wisdom on the easiest way to do this? Is it easier if you remove the gauge cluster, etc. for access? Thanks once again for your replies and advise.

Monty

zeeklu · 12-07-2007, 04:44 PM

Yes, it's suprisingly easy. Chris

rodstored-72 · 12-07-2007, 10:26 PM

i would say that it is not too hard as well. i just did mine & the hardest thing was the steeing column conn. & the dash conn. i was really trying to make sure that the conn. were tight...
you will be able to do it!!

good luck!

12-07-2007, 11:04 AM	#1
montyrobison Registered User Join Date: Apr 2001 Location: Pendleton, OR USA Posts: 37	Help - 72 K20 replace under dash harness Hi again, I should have brought this up in my previous post. I'm also having to replace my under dash wiring harness. Any more words of wisdom on the easiest way to do this? Is it easier if you remove the gauge cluster, etc. for access? Thanks once again for your replies and advise. Monty

12-07-2007, 04:44 PM	#2
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746	Re: Help - 72 K20 replace under dash harness Yes, it's suprisingly easy. Chris

12-07-2007, 10:26 PM	#3
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,985	Re: Help - 72 K20 replace under dash harness i would say that it is not too hard as well. i just did mine & the hardest thing was the steeing column conn. & the dash conn. i was really trying to make sure that the conn. were tight... you will be able to do it!! good luck!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.