![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#19 |
Registered User
Join Date: Dec 2004
Location: Saskatchewan, Canada
Posts: 1,371
|
Re: Fuel filler that works, blazer tank?
jorgensensc, the firebird marker is held in by itself, at least in my application. I cut the screw tabs off the bed, and put the trim on the outside of the truck and the lens on the backside, then put the nuts on. You might be able to rig it, but it's hard to say. Plus the firebird markers are sunk in, so difficult to grab.
Mudder, thanks for the pic, that is pretty much the idea I have as well. John Fabris, Yours is my favorite on this board. I was going to do it that way, but couldn't find one of those caps around here, so I figured I'd go a simpler way. Panteratron, I must have missed that thread, wow! If I were running LED's, that would be killer.
__________________
1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open |
![]() |
![]() |
Bookmarks |
|
|