Take a look at my rear end, tell me what you think - The 1947 - Present Chevrolet & GMC Truck Message Board Network

texanidiot25 · 12-12-2007, 10:37 PM

Now, depending what you came for, I have a question. While under the truck, (ungracefully) putting in the 2-piece drive shaft, my dad poked under to check my progress. Then, he mentioned that the rear axle didn't look like a GM 10 or 12 bolt. His guess was some sort of Dana.

Curious to know what axle I have. Didn't think to look for the axle #s, will be another 2 weeks til Im back over there.

Excuse the craptastic camera phone pic, it was what I had at the time.

(pay no attention to the exhaust pipes, their not hooked to anything, hanging by wires)

edit: dana 60? http://www.offroaders.com/info/tech-.../axlefacts.htm
These trucks had Dana axles?

bowtieboy93 · 12-12-2007, 10:43 PM

take a look at your what now? lol

Longhorn Man · 12-12-2007, 10:45 PM

dana

texanidiot25 · 12-12-2007, 10:48 PM

Dana 60 as it may be. Wasn't sure since Dana was with the Chrysler/Dodge/Plymouth muscle cars for the most part.

Compared to the GM axles, how strong is it?

Longhorn Man · 12-12-2007, 11:02 PM

dana is/was an outside axle maker
I couldn't tell you if it is stronger than the 12 bolt that woulda been there.

PanelDeland · 12-12-2007, 11:10 PM

Your butt looks big in that!!

Somebody needed to say it!!Besides,I've always wanted to say it but i like sleeping Indoors!

67_C-30 · 12-12-2007, 11:13 PM

I'm pretty sure judging by the small axle tubes that it is a Dana 44. If your truck is a 1/2 ton ,that's what it it would be. I have (2) 1/2 tons that came with Dana 44's. If your truck is a 3/4 it would be a Dana 60. All the Dana 60's were 8 lug and had floating rear axles, while the Dana 44's were 6 lug and have semi-floating (meaning it doesn't have the big rear hubs like 3/4 and 1 tons).

texanidiot25 · 12-12-2007, 11:45 PM

Quote:

Originally Posted by 67_C-30

I'm pretty sure judging by the small axle tubes that it is a Dana 44. If your truck is a 1/2 ton ,that's what it it would be. I have (2) 1/2 tons that came with Dana 44's. If your truck is a 3/4 it would be a Dana 60. All the Dana 60's were 8 lug and had floating rear axles, while the Dana 44's were 6 lug and have semi-floating (meaning it doesn't have the big rear hubs like 3/4 and 1 tons).

Thanks. I was judging off the center chunk, using this site as a reference: http://www.offroaders.com/info/tech-.../axlefacts.htm From that site, looks more like the 60.. But yes, half-ton with the 6 lugs.

From your experience, how are they compared to the 10 and 12 bolt axles?

Quote:

Your butt looks big in that!!

Somebody needed to say it!!Besides,I've always wanted to say it but i like sleeping Indoors!

Im 5' 11" and 137 lbs, you can't tell me that with a straight face. But then again, better me then your better half

cameeks · 12-13-2007, 12:37 AM

??? What is with the exaust? Looks like it will rub a little.

1bad chevy · 12-13-2007, 05:01 AM

it's a dana 44 dana 60 were put in 3/4 ton and the 44 was in 1/2 ton and they are stronger then the gm 10 bolt and the 12 bolt imo

dwaite72lnghrn · 12-13-2007, 05:41 AM

I never new they put dana 44 in the back end. The only 44 I have seen were front diffs in 4x4s both 1/2 1nd 3/4 ton.

texanidiot25 · 12-13-2007, 06:06 AM

Cool, thanks guys.

Quote:

Originally Posted by cameeks

??? What is with the exaust? Looks like it will rub a little.

It's just hanging by wire, its not hooked up to anything.

67_C-30 · 12-13-2007, 06:08 AM

Quote:

Originally Posted by texanidiot25

Thanks. I was judging off the center chunk, using this site as a reference: http://www.offroaders.com/info/tech-.../axlefacts.htm From that site, looks more like the 60.. But yes, half-ton with the 6 lugs.

From your experience, how are they compared to the 10 and 12 bolt axles?

Im 5' 11" and 137 lbs, you can't tell me that with a straight face. But then again, better me then your better half

I heard the Dana 44 is is slightly stronger than the 12 bolt, but both are very reliable rearends. The Dana 44 and Dana 60 covers are actually very close in size and shape. If it's 6 lug it's definitely the D44 though.

Yullose · 12-13-2007, 12:36 PM

nevermind

DavesRide · 12-13-2007, 03:54 PM

You posted your own answer of sorts. It looks like it is going to need a service soon so just measure the ring gear and you will have your answer as far as the Dana 44 or 60 thing. The illustrations are very close and you might want to wipe your rearend off once and a while. As he laughs to himself

texanidiot25 · 12-13-2007, 05:58 PM

Quote:

Originally Posted by DavesRide

You posted your own answer of sorts. It looks like it is going to need a service soon so just measure the ring gear and you will have your answer as far as the Dana 44 or 60 thing. The illustrations are very close and you might want to wipe your rearend off once and a while. As he laughs to himself

I found the site after I posted.. When I have the money after getting it on the road, Ill check it out my rear end.

Good idea, because my rear end is pretty greasy.

Next time I'm under the truck, I'll grab the casting numbers.

DirtyLarry · 12-13-2007, 06:24 PM

Quote:

Originally Posted by 67_C-30

If it's 6 lug it's definitely the D44 though.

That is not true. Although very rare, semi-floating 6 lug Dana 60's did exist back then. My 1968 GMC 1/2 ton came from the factory with one. I have only seen very few. This is actually the first coil sprung semi-float Dana 60 I've seen though.

The chitty thing of it is I wiped a few teeth of the ring gear on my Dana 60 about 15 years ago being a punk kid doing a smoke show on main street but I still have it laying around. I'll have to snap some pictures of it. Very rare piece. Being a broke kid at the time I put a D44 in it, which it still has. One these days I'll get that Dana 60 fixed.

texanidiot25 · 12-13-2007, 06:36 PM

So it is a Dana 60?

It's what I was leaning towards from the the site I found.. Do please post pics of it.

Looking at this list, it was on our trucks as a semi-floating axle:

http://77cj.littlekeylime.com/web_rs44.html

sorestgore · 12-13-2007, 08:13 PM

Last time I was asked that my response ended in me being slapped...

Probably shouldn't be honest with those kind of questions right?? lol

lukecp · 12-13-2007, 08:24 PM

On a non-Chevy note, one of my roomates just bought an original unmolested '79 Ford F100, with a 300/C6/Dana 44. I thought for sure it would have a 9" until I climbed underneath it and saw a Dana 44. I had no idea Ford used Dana rear axles in their trucks, even that late into the 70's. I wonder if it is some sort of I-6 thing, since I think every other 70's Ford 1/2 ton I've seen has had a 9"....

**special-K** · 12-14-2007, 01:38 AM

Dana made "All" the front axles for 4wd AMC,IH,GM,FOMOCO,and Chrysler.Many used the rears.The standard rear for GMCs was Dana.If your truck is a 1/2t,I think it is a Dana44.

67_C-30 · 12-14-2007, 02:22 AM

Quote:

Originally Posted by DirtyLarry

That is not true. Although very rare, semi-floating 6 lug Dana 60's did exist back then. My 1968 GMC 1/2 ton came from the factory with one. I have only seen very few. This is actually the first coil sprung semi-float Dana 60 I've seen though.

The chitty thing of it is I wiped a few teeth of the ring gear on my Dana 60 about 15 years ago being a punk kid doing a smoke show on main street but I still have it laying around. I'll have to snap some pictures of it. Very rare piece. Being a broke kid at the time I put a D44 in it, which it still has. One these days I'll get that Dana 60 fixed.

It would be the first I've seen or heard of. A 6-lug Dana 60 is not listed as an an option in any literature I have, but stranger things have happened. I'd like to see the pics of it.

Bishops Trucks · 12-14-2007, 03:00 AM

Those pants make your rearend look fat.

Tx Firefighter · 12-14-2007, 03:17 AM

I have a Dana 60 in my junk, but the cover interchanges with other Dana rears. My cover actually came off a Dodge diesel truck with a Dana 70.

DirtyLarry · 12-14-2007, 10:03 AM

Quote:

Originally Posted by 67_C-30

It would be the first I've seen or heard of. A 6-lug Dana 60 is not listed as an an option in any literature I have, but stranger things have happened. I'd like to see the pics of it.

Will do….It might take a few days as the axle is behind my garage lying on a pallet buried in the snow. Got more snow coming tomorrow too.

6 lug semi-floating Dana 60’s are not like the Loch Ness monster or $40 Army Jeeps…..the axle did actually exist. Semi-Floating Dana 60 8 lug exists also in late 80’s Ford trucks and Econolines although not nearly as rare as the GM 6 lug version.

12-12-2007, 10:37 PM	#1
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Take a look at my rear end, tell me what you think Now, depending what you came for, I have a question. While under the truck, (ungracefully) putting in the 2-piece drive shaft, my dad poked under to check my progress. Then, he mentioned that the rear axle didn't look like a GM 10 or 12 bolt. His guess was some sort of Dana. Curious to know what axle I have. Didn't think to look for the axle #s, will be another 2 weeks til Im back over there. Excuse the craptastic camera phone pic, it was what I had at the time. (pay no attention to the exhaust pipes, their not hooked to anything, hanging by wires) edit: dana 60? http://www.offroaders.com/info/tech-.../axlefacts.htm These trucks had Dana axles? Last edited by texanidiot25; 12-12-2007 at 10:46 PM.

12-12-2007, 10:43 PM	#2
bowtieboy93 Registered User Join Date: Feb 2007 Location: (Cloverdale) Surrey BC Canada Posts: 1,566	Re: Take a look at my rear end, tell me what you think take a look at your what now? lol __________________ Travis travis_moffatt@hotmail.com 1969 Chevrolet C-10 LWB, 350c.i., TH350, In Pieces. 1991 GMC Sonoma, IROCS s10 grill 1963 Ford Galaxie 351/C4

12-12-2007, 10:45 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Take a look at my rear end, tell me what you think dana

12-12-2007, 10:48 PM	#4
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Take a look at my rear end, tell me what you think Dana 60 as it may be. Wasn't sure since Dana was with the Chrysler/Dodge/Plymouth muscle cars for the most part. Compared to the GM axles, how strong is it? Last edited by texanidiot25; 12-12-2007 at 10:49 PM.

12-12-2007, 11:02 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Take a look at my rear end, tell me what you think dana is/was an outside axle maker I couldn't tell you if it is stronger than the 12 bolt that woulda been there.

12-12-2007, 11:10 PM	#6
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Take a look at my rear end, tell me what you think Your butt looks big in that!! Somebody needed to say it!!Besides,I've always wanted to say it but i like sleeping Indoors! __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" Last edited by PanelDeland; 12-12-2007 at 11:11 PM.

12-12-2007, 11:13 PM	#7
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Take a look at my rear end, tell me what you think I'm pretty sure judging by the small axle tubes that it is a Dana 44. If your truck is a 1/2 ton ,that's what it it would be. I have (2) 1/2 tons that came with Dana 44's. If your truck is a 3/4 it would be a Dana 60. All the Dana 60's were 8 lug and had floating rear axles, while the Dana 44's were 6 lug and have semi-floating (meaning it doesn't have the big rear hubs like 3/4 and 1 tons). __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 12-12-2007 at 11:16 PM.

12-13-2007, 12:37 AM	#9
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Take a look at my rear end, tell me what you think ??? What is with the exaust? Looks like it will rub a little. __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

12-13-2007, 05:01 AM	#10
1bad chevy Registered User Join Date: Dec 2006 Location: POWNAL VERMONT Posts: 343	Re: Take a look at my rear end, tell me what you think it's a dana 44 dana 60 were put in 3/4 ton and the 44 was in 1/2 ton and they are stronger then the gm 10 bolt and the 12 bolt imo __________________ 1972 c-20 chevy 500 caddy/4.10posi / 1972 3/4 ton gmc 350 4x4/4.10posi front&rear

12-13-2007, 05:41 AM	#11
dwaite72lnghrn Registered User Join Date: Jun 2002 Location: central pa Posts: 1,525	Re: Take a look at my rear end, tell me what you think I never new they put dana 44 in the back end. The only 44 I have seen were front diffs in 4x4s both 1/2 1nd 3/4 ton. __________________ 72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper 72 bug(the better half's) under reconstruction 2009 HHR aqua blue 71 GMC k20 350/sm465 2009 Chevy hd3500 6.6 Victory Red crew cab dually Dave & Jeanne

12-13-2007, 12:36 PM	#14
Yullose Registered User Join Date: Dec 2007 Location: Mooresville, NC Posts: 76	Re: Take a look at my rear end, tell me what you think nevermind Last edited by Yullose; 12-13-2007 at 12:37 PM.

12-13-2007, 03:54 PM	#15
DavesRide Registered User Join Date: Oct 2007 Location: Garageless, Missouri Posts: 408	Re: Take a look at my rear end, tell me what you think You posted your own answer of sorts. It looks like it is going to need a service soon so just measure the ring gear and you will have your answer as far as the Dana 44 or 60 thing. The illustrations are very close and you might want to wipe your rearend off once and a while. As he laughs to himself __________________ R.I.P ESLL Even as the body dies the spirit lives on in the people you touched Last edited by DavesRide; 12-13-2007 at 03:54 PM.

12-13-2007, 06:36 PM	#18
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Take a look at my rear end, tell me what you think So it is a Dana 60? It's what I was leaning towards from the the site I found.. Do please post pics of it. Looking at this list, it was on our trucks as a semi-floating axle: http://77cj.littlekeylime.com/web_rs44.html Last edited by texanidiot25; 12-13-2007 at 06:37 PM.

12-13-2007, 08:13 PM	#19
sorestgore Official C-10 Destroyer Join Date: Jan 2007 Location: Menomonie, WI Posts: 72	Re: Take a look at my rear end, tell me what you think Last time I was asked that my response ended in me being slapped... Probably shouldn't be honest with those kind of questions right?? lol __________________ 5 miles to a gallon, and lovin it! Deceased: 1972 C10 Stepside, 350ci smallblock, Edelbrock 750 performer carb, Edelbrock Performer RPM manifold, DynaMax headers, Thrush glasspacks, flame-throwers!

12-13-2007, 08:24 PM	#20
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Re: Take a look at my rear end, tell me what you think On a non-Chevy note, one of my roomates just bought an original unmolested '79 Ford F100, with a 300/C6/Dana 44. I thought for sure it would have a 9" until I climbed underneath it and saw a Dana 44. I had no idea Ford used Dana rear axles in their trucks, even that late into the 70's. I wonder if it is some sort of I-6 thing, since I think every other 70's Ford 1/2 ton I've seen has had a 9".... __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg



Register or Log In To remove these advertisements.

12-14-2007, 01:38 AM	#21
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Take a look at my rear end, tell me what you think Dana made "All" the front axles for 4wd AMC,IH,GM,FOMOCO,and Chrysler.Many used the rears.The standard rear for GMCs was Dana.If your truck is a 1/2t,I think it is a Dana44. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 12-14-2007 at 02:41 AM.

12-14-2007, 03:00 AM	#23
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: Take a look at my rear end, tell me what you think Those pants make your rearend look fat. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

12-14-2007, 03:17 AM	#24
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Take a look at my rear end, tell me what you think I have a Dana 60 in my junk, but the cover interchanges with other Dana rears. My cover actually came off a Dodge diesel truck with a Dana 70. __________________ I'm on the Instagram- @Gearhead_Kevin

Register or Log In To remove these advertisements.