![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Jan 2008
Location: Red Lodge Montana
Posts: 240
|
Frame Cutting Behind the Cab
I know there is a post on cutting the frame under the cab to make a SWB but im wondering if there is any info on doing it BEHIND the cab. I know its been done. I just dont want to lift up the cab.
Thanks |
![]() |
![]() |
![]() |
#2 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: Frame Cutting Behind the Cab
Leaf or coil?
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Jan 2008
Location: Red Lodge Montana
Posts: 240
|
Re: Frame Cutting Behind the Cab
Leaf spring, sorry
|
![]() |
![]() |
![]() |
#4 |
*************
![]() Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,846
|
Re: Frame Cutting Behind the Cab
45 degree cut:
http://67-72chevytrucks.com/vboard/s...d.php?t=232149 Step-cut: http://67-72chevytrucks.com/vboard/s...d.php?t=123624 EDIT: I guess I should read the post a little more carefully. There should be 12" straight inches of frame between the cab and the front shackles. You should be able to cut that out using a 45 degree cut or a step.
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 01-22-2008 at 09:34 AM. |
![]() |
![]() |
![]() |
#5 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: Frame Cutting Behind the Cab
I dont see a probnlem cutting behind the cab on that one......the reason the coil trucks are cut under the cab is cause you dont have to mess with moving the crossmember for the trailing arms. What yr is the truck?
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Nov 2005
Location: northwestern wi
Posts: 2,111
|
Re: Frame Cutting Behind the Cab
mine was cut behind the cab by a prevous owner. straight cut and boxed. not how i would have done it but it's been over 10 years now with no problems and was used as a mud truck before i got it
__________________
common sense isn't so common anymore |
![]() |
![]() |
![]() |
Bookmarks |
|
|