when aquired how much did you pay for you trucks? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

60ratrod · 01-21-2008, 11:32 AM

i paid $750 for my 60, the abomination of the automotive world. for my 72 i paid $700

64swb · 01-22-2008, 11:16 AM

Bought my '64 swb fleetside for $1500 350/m22 4 speed came with a new american auto wire direct fit harness new in box. sold it 3 months later to my father in law minus the m22 and wiring harness for $1000. I also bought my '66 GMC short bed fleetside 4X4 with big back window for $1200 has a built 327 and brand new 33'' tires. And in January i picked up a 63 gmc swb fleetside for $500 and drove it home.

Slmd92DIME · 01-22-2008, 11:50 AM

I have 500 in the 65 and 600 in the 64. Just enough good parts to build one truck.

suzq044 · 01-23-2008, 04:32 AM

250 for the C10; 500 for the Flatbed and 1500 for the Panel. All of which were in good condition when bought; since then, the C10s engine needs to be rebuilt or replaced; the Flatbed is still running strong, but could use some exhaust gaskets; and the panel needs the brake system looked at.

LIVE RUST · 01-23-2008, 09:08 AM

Free

. Two parts trucks later and still under $2000.00 in it. Lots of hours though. Great thread, GREAT TRUCKS!

mwipp · 01-26-2008, 11:22 AM

i paid $1200 for a 66' c10 short bed step side with a 283 and a three on the tree(which only works in 1st and reverse). body is straight and has little rust at least it is considered little rust in wisconsin. rockers, lower fender, about 2 square feet of the floor and cab corners need to be replaced. i just bought it and have invested any into it...yet!

leftcoast66 · 01-26-2008, 06:10 PM

Paid 350 and still got ripped off.He said it would start, I was 14 and believed him, ended up motor was screwed and so was the body. But w/ a lot of love and a few years, its all good now...

*LILRED66* · 01-26-2008, 11:40 PM

Here are a few pictures of my '66 Chevy K10. I paid more than enough for this one, but I couldn't resist. She was calling my name and needed a new home. I am a sucker for the 4-5-6 Chevy Trucks and the next thing I knew, she was sitting in my driveway.

MistrThou · 01-27-2008, 02:29 AM

300 bucks. Ran, no taillights, front bumper or bed.

For 300 bucks, built a flatbed, installed lights in the rear bumper, and got a used front bumper.
Then 100 bucks for wheels/tires.

So, 700 bucks into it, 300 initial.

steverino66 · 01-27-2008, 04:35 AM

Paid $1200 in '05 for my short step-
including the very tired 350/400
Doesn't LOOK much different yet, but a lot of upgrades are in the works.

Rokcrln · 01-27-2008, 11:48 AM

Paid $1500 for my wife's 63 SWB fleet side a few months ago. Has a rebuilt 350 with KB pistons, roller rockers, th350 a very strait bed. It does have rust in the door bottoms, kick panels and some small other areas. For me the rust is nothing but she will not start working on it untill I finish a few more of my other projects

I figure we will have 15k plus into it when done how she wants it. What's a guy to do

Here are some 1st day pics and what she wants it to look like when done.

Kevin
LFD Inc.

ryan913 · 02-01-2008, 12:47 AM

Mine came with a property that I had bought in 94. Along with a 56 chevy 2 door hardtop.

Slowmotion · 02-03-2008, 02:19 PM

I got my 61 short step for $600.00 and a ten speed.

01-21-2008, 11:32 AM	#51
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: when aquired how much did you pay for you trucks? i paid $750 for my 60, the abomination of the automotive world. for my 72 i paid $700 __________________ ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900

01-22-2008, 11:16 AM	#52
64swb Registered User Join Date: Mar 2007 Location: Camino, CA Posts: 182	Re: when aquired how much did you pay for you trucks? Bought my '64 swb fleetside for $1500 350/m22 4 speed came with a new american auto wire direct fit harness new in box. sold it 3 months later to my father in law minus the m22 and wiring harness for $1000. I also bought my '66 GMC short bed fleetside 4X4 with big back window for $1200 has a built 327 and brand new 33'' tires. And in January i picked up a 63 gmc swb fleetside for $500 and drove it home. __________________ 1978 Chevy C10, 1986 Chevy K20 'Burb, 1970 Chevelle, 1996 K2500 'Burb, 1977 Chevy K10, 1970 Ford F-250, 72 Ford F100 4x4, 1979 Chevy C30, 1982 Chevy C30, 1996 Chevy Dually 4x4 SAS, 1997 Chevy Tahoe, 1991 Ford F-350 cclb dually 4x4

01-22-2008, 11:50 AM	#53
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: when aquired how much did you pay for you trucks? I have 500 in the 65 and 600 in the 64. Just enough good parts to build one truck.

01-23-2008, 04:32 AM	#54
suzq044 Resident Photoshop Nerd Join Date: Sep 2007 Location: Gordon, GA Posts: 723	Re: when aquired how much did you pay for you trucks? 250 for the C10; 500 for the Flatbed and 1500 for the Panel. All of which were in good condition when bought; since then, the C10s engine needs to be rebuilt or replaced; the Flatbed is still running strong, but could use some exhaust gaskets; and the panel needs the brake system looked at. __________________ PJ - 1966 C10 Panel -- Max² - 1964 Jeep Wagoneer Panel-delivery -- Waiting his turn Last edited by suzq044; 01-23-2008 at 04:34 AM.

01-23-2008, 09:08 AM	#55
LIVE RUST 1966 Chevy/GMC Mongrel K10 Join Date: Sep 2007 Location: Western MA Posts: 160	Re: when aquired how much did you pay for you trucks? Free. Two parts trucks later and still under $2000.00 in it. Lots of hours though. Great thread, GREAT TRUCKS! Attached Images Last edited by LIVE RUST; 01-23-2008 at 09:11 AM.

01-26-2008, 11:22 AM	#56
mwipp Registered User Join Date: Nov 2007 Location: verona, WI Posts: 123	Re: when aquired how much did you pay for you trucks? i paid $1200 for a 66' c10 short bed step side with a 283 and a three on the tree(which only works in 1st and reverse). body is straight and has little rust at least it is considered little rust in wisconsin. rockers, lower fender, about 2 square feet of the floor and cab corners need to be replaced. i just bought it and have invested any into it...yet! Last edited by mwipp; 01-26-2008 at 11:22 AM.

01-26-2008, 06:10 PM	#57
leftcoast66 Registered User Join Date: Sep 2006 Location: Covington, WA Posts: 770	Re: when aquired how much did you pay for you trucks? Paid 350 and still got ripped off.He said it would start, I was 14 and believed him, ended up motor was screwed and so was the body. But w/ a lot of love and a few years, its all good now...

01-26-2008, 11:40 PM	#58
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: when aquired how much did you pay for you trucks? Here are a few pictures of my '66 Chevy K10. I paid more than enough for this one, but I couldn't resist. She was calling my name and needed a new home. I am a sucker for the 4-5-6 Chevy Trucks and the next thing I knew, she was sitting in my driveway. Attached Images

01-27-2008, 02:29 AM	#59
MistrThou Registered User Join Date: Mar 2007 Location: Janesville, WI Posts: 18	Re: when aquired how much did you pay for you trucks? 300 bucks. Ran, no taillights, front bumper or bed. For 300 bucks, built a flatbed, installed lights in the rear bumper, and got a used front bumper. Then 100 bucks for wheels/tires. So, 700 bucks into it, 300 initial. Attached Images

01-27-2008, 04:35 AM	#60
steverino66 Registered User Join Date: Oct 2005 Location: oklahoma Posts: 663	Re: when aquired how much did you pay for you trucks? Paid $1200 in '05 for my short step- including the very tired 350/400 Doesn't LOOK much different yet, but a lot of upgrades are in the works. Attached Images

01-27-2008, 11:48 AM	#61
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: when aquired how much did you pay for you trucks? Paid $1500 for my wife's 63 SWB fleet side a few months ago. Has a rebuilt 350 with KB pistons, roller rockers, th350 a very strait bed. It does have rust in the door bottoms, kick panels and some small other areas. For me the rust is nothing but she will not start working on it untill I finish a few more of my other projects I figure we will have 15k plus into it when done how she wants it. What's a guy to do Here are some 1st day pics and what she wants it to look like when done. Kevin LFD Inc. Attached Images

02-01-2008, 12:47 AM	#62
ryan913 Registered User Join Date: Jan 2008 Location: kenton, oh Posts: 183	Re: when aquired how much did you pay for you trucks? Mine came with a property that I had bought in 94. Along with a 56 chevy 2 door hardtop.

02-03-2008, 02:19 PM	#63
Slowmotion Registered User Join Date: Aug 2005 Location: Centennial Hills Nevada Posts: 58	Re: when aquired how much did you pay for you trucks? I got my 61 short step for $600.00 and a ten speed.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.