What did you get done? 02/24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 02-26-2008, 06:09 AM

My wife had friends in town this weekend so I was on my own and had the weekend off. Did I go drinking with the boys? Heck no, I worked around the house. Saturday I got the oil changed, and tires rotated on my daily driver. I wash the exteriors, and cleaned the interior up.

Sunday I spent most of the day working in the yard. It tooks 20+ bags to haul all of the clippings off. Next weekend I'll get the mulch down.

What did you get done?

Flyin Sparkplug · 02-26-2008, 06:15 AM

what did get done today im guessing?

bad_burb · 02-26-2008, 07:13 AM

I just got home from the snow in Lake Tahoe. The wife and I had a blast. It was a little slow going on the way home due to chain restrictions, but we made it. It was definatly nice to get away for the weekend and not have to work.

87Lowrider · 02-26-2008, 07:17 AM

I drove to Louisville, Ky Friday with my 781 heads from the 454 I'm building for the '87 lowrider.

Here's what they looked like when I removed them from the block last week.

My wife and I dropped them off at my brothers shop so he could get them in the washer, cleaned up and ready to start the machine work on Saturday morning. We left his shop 30 minutes later heading down I65 to his house and I lost power in my '86 Jimmy. Had to tow it back to his shop. Saturday morning, I started working on it while he started working on the heads. The problem was in the pickup stator in the distributor. So, I rebuilt the distributor and fired it up.

Later in the day, he got the heads finished. Here are the old valves and new ones:

He opened up those stock heads with 2.190/1.880 valves

Here's the finished product, ready for paint and installation:

Got them back home last night. Started prepping the lower end tonight. Hope to have it running in a few weeks.

Kenny

MylilBowTie · 02-26-2008, 07:18 AM

Installed an alternator belt. Thinking I might install a higher temp thermostat. Gets warm but never really hot. Spring is supposed to show up around here pretty soon though.

Pyrotechnic · 02-26-2008, 07:27 AM

Left some rubber on the road.

C-10volvo · 02-26-2008, 08:11 AM

Yesterday I woke up early and wrote some papers for school. After that fun time was over, I enjoyed the sunny day by laying some coats of Mothers 7, 9 then tech wax on the truck.

Today I swapped out the show tires on the daily driver for the summers. SOO much nicer to drive now.

BigDaddyDave · 02-26-2008, 08:19 AM

I took my first weekend off in about 3 months! I cleaned my truck up on Saturday, so it could rain on it Sunday. Whoever said that owning the company would allow for more time off LIED!

SCOTI · 02-26-2008, 08:24 AM

I finished the necessary mod's to my OE spindles for the Budget Big-Brake kit (http://67-72chevytrucks.com/vboard/s...d.php?t=245314). I got the spindle forging seams all ground down & they look much better even though they'll never be seen (or used by me). It's a sickness . . .....

I wanted to get a pic of the 68 w/the brake assembly installed but really needed to finish a few things for the Dropmember install first. I made the initial cuts & clean-up on the frame rails for the R&P notches a few weeks ago but didn't weld anything because I wanted to verify everything was correct (I needed a steering rack which I didn't have @ the time).

Today I tacked the c-notches in & then installed the main DM crossmember w/a R&P unit. Everything lined up ok so I pulled it back apart to finish welding the c-notches. I go to start welding & can't get any spark. It's like the welder (Hobart 210) isn't grounding. It did the tack welds fine just one hour earlier but now it's dead. I checked a couple of 'circuit protectors' the unit has but they appear ok. You pull the trigger & the wire feeds like it should but there's no ground (it wouldn't even ground to the main terminal where the ground cable is mounted). I also checked my power source. I swapped my plugs (I use my dryers power supply) & the dryer runs fine & heated w/o any issue.

Needless to say..... I'm bummed. So, this week will be the 'BBB' install on some Western Chassis dropped spindles. Hopefully I'll get some new 'shoes' I'm expecting & can figure out what's wrong w/the welder.

manimal · 02-26-2008, 08:58 AM

"MAY" have traded my '79 F250 for a '79 C30 std cab dually.THAT WOULD BE GREAT! Just hoping the guys goes for it.
-Lance

**old Rusty C10** · 02-26-2008, 08:58 AM

Friday we ran around for work and yesterday we met up with a customer to pick out tile for a job.. for dinner we drove down to Atlantic City and had dinner at one of my favorite restaurants, Arturos.. then a couple of drinks and some dancing at the Blue Martini Lounge in Bally's
Got in about 4AM so needless to say we didnt do anything today except recover
not a bad way to spend the birthday weekend i guess monday is back to the salt lick

Hoods69BadBowTie · 02-26-2008, 09:11 AM

Not awhole lot of anything car and truck related? Hung out with friends and the some women for the entire weekend. The usual chores like laundry and room cleanup. Got my dogs all muddy and walked today. Thats about all, it started sleeting and rained slow on and off for the day.

89 crew · 02-26-2008, 10:03 AM

I took my sister car shopping both Sat and Sun. I have FINALLY talked her into getting rid of her POS hyundai! In it's place she is getting a 95 deville for nice weather (I still have to get it), and a 88 4x4 burb with a 3 inch spring lift and 31 10.50's that we picked up today! Both need some work to be dependable daily drives but hey, I converted her back to GM! I really wouldn't have cared except every time she broke the pos she wants me to go haul it in, and fix it. The best part is for the pair she has $800 in them. The burb has new rubber on the ground, a new goodwrench tbi 350, and a reman 700r4. The cadillac has a perfect body, and 3 easy fix codes to take care of.

kevinr1970 · 02-26-2008, 10:46 AM

Took the canopy and bug shield off.
Played around with some other things too put didn't get anywhere figuring out the cruise control?
Before and after pic's.

Malo83 · 02-26-2008, 10:58 AM

Sitting here waiting for the restart of the Nascar Calif. 500 in Fontana

This has to be some record for the longest race delays in Nascar

gchemist · 02-26-2008, 12:08 PM

Installed a late model 145 amp alternator!! Killer amps. Power windows love the amps. So do the electric fans. Pics coming soon.

slug · 02-26-2008, 06:09 PM

well, i continued my epic quest to try and find new bolts for my torque converter and failed. wired in the starter . tried to fix some wiring only to break more stuff, washed the gmc.

1970pelle · 02-26-2008, 06:42 PM

Sat. replace the ignition suppressor dodad in the dist.,that the parts guys said didn't exsit.Sat nite Monster Jam in Jax.Had good seats 3 rows off the plastic,center feild.Sunday worked on cluster.Paint housing,back of gauges silver.Installed red bulbs.Also did the HVAC controls.Removed the blue strip and change to red.Looks good.

BowTieOgre · 02-26-2008, 07:52 PM

Spent a good part of the day on Saturday working on the van and the truck. I took the Edelbrock off the 350 in the van and did a partial disassemble so I could clean the needles and float bowls. I put it back on and it starts and runs BUT it needs to be adjusted because the idle speed is a bit high and there is a little smoke in the exhaust.

I put new rotors, pads and bearings on the C10. It only took me 3 trips to the parts store(s) to get the bearings I needed.

I gave the initial guy specific information about the truck and he still gave me the wrong parts. I didnt find out until I had the truck in the air with the rotor off so I had to get a ride back to the parts store only to find out they only had 3 of the 4 bearings I needed.

I ended up going to a different chain and got everything put back together.

As a treat to myself after doing all that "menial" work I put the new front bumper on my truck. I wasnt totally satisfied with the fit but it looks better than the stock painted one.

abebummy26 · 02-26-2008, 09:19 PM

Swapped waterpumps on my dads daily beater 96 safari van. Put all new hoses on it. Got all the air pockets out of the cooling system. First time since we got it that it has kept a steady temperature. No yellow snow under it either put together the treadmill from h.#!!. Helped clean the bottom of the bed on my neighbor's 1989 Chevy rcsb. He pulled the truck out of the shed. So his handyman carpenter will have room to work on his 34 ford It has been sitting dormant for almost 2 years.

69BBsuburban · 02-26-2008, 10:12 PM

SAT- Drove the Hotrod around for awhile with my son, cleaned up the yard, and hung up a few more shelfs in the garage.

SUN- Rearranged garage, pulled the hood, grill, and fenders from the Charger, detailed the engine and interior of the '78....

SSC's76 · 02-26-2008, 10:59 PM

Got the engine in the bird and fired her up. She hit right off the bat and ran like a champ. We drove her up to the the mountains for the initial drive. It ran flawlessly. We dident use squat for gas so it seems to be a good little motor not a peppy as I would like but it gets going when the gas goes to the floor. Spent last night towing a friend across town kinda funny when I decided to stomp on the gas and break the tires loose. Sad when you cant get traction at 15 MPH with a fnord probe latched on the back.

**Captkaos** · 02-27-2008, 12:49 AM

Pulled the accessories off the front of the Jimmy to put the serpentine setup on it. Hit the alternator bracket with some polish to see if I wanted to do both of them, decided not to at this time.

spudz · 02-27-2008, 01:58 AM

got me some Martin Bro's 24s... they will end up on my tahoe when I get the motor back in it but I couldn't help but stick em on the Z71...

MylilBowTie · 02-27-2008, 02:41 AM

Quote:

Originally Posted by gchemist

Installed a late model 145 amp alternator!! Killer amps. Power windows love the amps. So do the electric fans. Pics coming soon.

Is that by chance a gm alternator or aftermarket?

02-26-2008, 06:09 AM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	What did you get done? 02/24 My wife had friends in town this weekend so I was on my own and had the weekend off. Did I go drinking with the boys? Heck no, I worked around the house. Saturday I got the oil changed, and tires rotated on my daily driver. I wash the exteriors, and cleaned the interior up. Sunday I spent most of the day working in the yard. It tooks 20+ bags to haul all of the clippings off. Next weekend I'll get the mulch down. What did you get done? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 02-26-2008 at 06:15 AM.

02-26-2008, 06:15 AM	#2
Flyin Sparkplug Registered User Join Date: Feb 2008 Location: West Virginia Posts: 42	Re: What did you get done? 02/24 what did get done today im guessing? __________________ -Flyin Sparkplug -1976 Scottsdale Camper Special "To be old and wise, you must first be young and stupid"

02-26-2008, 07:13 AM	#3
bad_burb Registered User Join Date: Aug 2005 Location: Vallejo, California Posts: 659	Re: What did you get done? 02/24 I just got home from the snow in Lake Tahoe. The wife and I had a blast. It was a little slow going on the way home due to chain restrictions, but we made it. It was definatly nice to get away for the weekend and not have to work. __________________ '73 C-30 3+3 Dually 454/TH400 '74 Fleetside 350/TH350 (SOLD) '69 Nova 350/TH350 (project FOR SALE) '63 Nova 305/TH350 3.73 posi (the wife's project)

02-26-2008, 07:17 AM	#4
87Lowrider Navy Radioman Veteran Join Date: Jul 2007 Location: Western Kentucky Posts: 1,350	Re: What did you get done? 02/24 I drove to Louisville, Ky Friday with my 781 heads from the 454 I'm building for the '87 lowrider. Here's what they looked like when I removed them from the block last week. My wife and I dropped them off at my brothers shop so he could get them in the washer, cleaned up and ready to start the machine work on Saturday morning. We left his shop 30 minutes later heading down I65 to his house and I lost power in my '86 Jimmy. Had to tow it back to his shop. Saturday morning, I started working on it while he started working on the heads. The problem was in the pickup stator in the distributor. So, I rebuilt the distributor and fired it up. Later in the day, he got the heads finished. Here are the old valves and new ones: He opened up those stock heads with 2.190/1.880 valves Here's the finished product, ready for paint and installation: Got them back home last night. Started prepping the lower end tonight. Hope to have it running in a few weeks. Kenny __________________ 1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side - At the Body Shop Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside

02-26-2008, 07:18 AM	#5
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Re: What did you get done? 02/24 Installed an alternator belt. Thinking I might install a higher temp thermostat. Gets warm but never really hot. Spring is supposed to show up around here pretty soon though. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

02-26-2008, 07:27 AM	#6
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: What did you get done? 02/24 Left some rubber on the road.

02-26-2008, 08:11 AM	#7
C-10volvo Registered User Join Date: May 2003 Location: Lake Oswego, Oregon Posts: 1,028	Re: What did you get done? 02/24 Yesterday I woke up early and wrote some papers for school. After that fun time was over, I enjoyed the sunny day by laying some coats of Mothers 7, 9 then tech wax on the truck. Today I swapped out the show tires on the daily driver for the summers. SOO much nicer to drive now. __________________ Ken Morgan For fun: 1964 Volvo 122 For slow: 1984 Chevrolet C-10 For everything else: 1997 BMW M3

02-26-2008, 08:19 AM	#8
BigDaddyDave RIP BigDaddyDave ~7-23-09~ You will be missed~ Join Date: Aug 2007 Location: Concord NC Posts: 1,361	Re: What did you get done? 02/24 I took my first weekend off in about 3 months! I cleaned my truck up on Saturday, so it could rain on it Sunday. Whoever said that owning the company would allow for more time off LIED! __________________ BigDaddyDave's Truck: http://www.flickr.com/photos/daves71chevy/ \| See it in Action!

02-26-2008, 08:24 AM	#9
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,943	Re: What did you get done? 02/24 I finished the necessary mod's to my OE spindles for the Budget Big-Brake kit (http://67-72chevytrucks.com/vboard/s...d.php?t=245314). I got the spindle forging seams all ground down & they look much better even though they'll never be seen (or used by me). It's a sickness . . ..... I wanted to get a pic of the 68 w/the brake assembly installed but really needed to finish a few things for the Dropmember install first. I made the initial cuts & clean-up on the frame rails for the R&P notches a few weeks ago but didn't weld anything because I wanted to verify everything was correct (I needed a steering rack which I didn't have @ the time). Today I tacked the c-notches in & then installed the main DM crossmember w/a R&P unit. Everything lined up ok so I pulled it back apart to finish welding the c-notches. I go to start welding & can't get any spark. It's like the welder (Hobart 210) isn't grounding. It did the tack welds fine just one hour earlier but now it's dead. I checked a couple of 'circuit protectors' the unit has but they appear ok. You pull the trigger & the wire feeds like it should but there's no ground (it wouldn't even ground to the main terminal where the ground cable is mounted). I also checked my power source. I swapped my plugs (I use my dryers power supply) & the dryer runs fine & heated w/o any issue. Needless to say..... I'm bummed. So, this week will be the 'BBB' install on some Western Chassis dropped spindles. Hopefully I'll get some new 'shoes' I'm expecting & can figure out what's wrong w/the welder. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-26-2008, 08:58 AM	#10
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: What did you get done? 02/24 "MAY" have traded my '79 F250 for a '79 C30 std cab dually.THAT WOULD BE GREAT! Just hoping the guys goes for it. -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

02-26-2008, 08:58 AM	#11
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,281	Re: What did you get done? 02/24 Friday we ran around for work and yesterday we met up with a customer to pick out tile for a job.. for dinner we drove down to Atlantic City and had dinner at one of my favorite restaurants, Arturos.. then a couple of drinks and some dancing at the Blue Martini Lounge in Bally's Got in about 4AM so needless to say we didnt do anything today except recover not a bad way to spend the birthday weekend i guess monday is back to the salt lick __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

02-26-2008, 09:11 AM	#12
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: What did you get done? 02/24 Not awhole lot of anything car and truck related? Hung out with friends and the some women for the entire weekend. The usual chores like laundry and room cleanup. Got my dogs all muddy and walked today. Thats about all, it started sleeting and rained slow on and off for the day. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

02-26-2008, 10:03 AM	#13
89 crew Registered User Join Date: Mar 2006 Location: Kansas Posts: 865	Re: What did you get done? 02/24 I took my sister car shopping both Sat and Sun. I have FINALLY talked her into getting rid of her POS hyundai! In it's place she is getting a 95 deville for nice weather (I still have to get it), and a 88 4x4 burb with a 3 inch spring lift and 31 10.50's that we picked up today! Both need some work to be dependable daily drives but hey, I converted her back to GM! I really wouldn't have cared except every time she broke the pos she wants me to go haul it in, and fix it. The best part is for the pair she has $800 in them. The burb has new rubber on the ground, a new goodwrench tbi 350, and a reman 700r4. The cadillac has a perfect body, and 3 easy fix codes to take care of.

02-26-2008, 10:46 AM	#14
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Re: What did you get done? 02/24 Took the canopy and bug shield off. Played around with some other things too put didn't get anywhere figuring out the cruise control? Before and after pic's. Attached Images __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

02-26-2008, 10:58 AM	#15
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: What did you get done? 02/24 Sitting here waiting for the restart of the Nascar Calif. 500 in Fontana This has to be some record for the longest race delays in Nascar



Register or Log In To remove these advertisements.

02-26-2008, 12:08 PM	#16
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: What did you get done? 02/24 Installed a late model 145 amp alternator!! Killer amps. Power windows love the amps. So do the electric fans. Pics coming soon.

02-26-2008, 06:09 PM	#17
slug Registered User Join Date: Jan 2008 Location: Groves,TX Posts: 483	Re: What did you get done? 02/24 well, i continued my epic quest to try and find new bolts for my torque converter and failed. wired in the starter . tried to fix some wiring only to break more stuff, washed the gmc.

02-26-2008, 06:42 PM	#18
1970pelle Registered User Join Date: Sep 2007 Location: N.E. Florida Posts: 500	Re: What did you get done? 02/24 Sat. replace the ignition suppressor dodad in the dist.,that the parts guys said didn't exsit.Sat nite Monster Jam in Jax.Had good seats 3 rows off the plastic,center feild.Sunday worked on cluster.Paint housing,back of gauges silver.Installed red bulbs.Also did the HVAC controls.Removed the blue strip and change to red.Looks good. Last edited by 1970pelle; 09-25-2009 at 01:26 AM.

02-26-2008, 07:52 PM	#19
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: What did you get done? 02/24 Spent a good part of the day on Saturday working on the van and the truck. I took the Edelbrock off the 350 in the van and did a partial disassemble so I could clean the needles and float bowls. I put it back on and it starts and runs BUT it needs to be adjusted because the idle speed is a bit high and there is a little smoke in the exhaust. I put new rotors, pads and bearings on the C10. It only took me 3 trips to the parts store(s) to get the bearings I needed. I gave the initial guy specific information about the truck and he still gave me the wrong parts. I didnt find out until I had the truck in the air with the rotor off so I had to get a ride back to the parts store only to find out they only had 3 of the 4 bearings I needed. I ended up going to a different chain and got everything put back together. As a treat to myself after doing all that "menial" work I put the new front bumper on my truck. I wasnt totally satisfied with the fit but it looks better than the stock painted one. Attached Images __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads Last edited by BowTieOgre; 02-26-2008 at 07:52 PM.

02-26-2008, 09:19 PM	#20
abebummy26 Registered User Join Date: Sep 2006 Location: New Haven, MO Posts: 1,243	Re: What did you get done? 02/24 Swapped waterpumps on my dads daily beater 96 safari van. Put all new hoses on it. Got all the air pockets out of the cooling system. First time since we got it that it has kept a steady temperature. No yellow snow under it either put together the treadmill from h.#!!. Helped clean the bottom of the bed on my neighbor's 1989 Chevy rcsb. He pulled the truck out of the shed. So his handyman carpenter will have room to work on his 34 ford It has been sitting dormant for almost 2 years. __________________ -Lincoln 1987 GMC S15 (soon to be a chevy clone) 2.5l, 4 speed, no ps, no pb, no ac Silence is golden, but duct tape is silver. Spoken by Cletus the hillbilly I like stickers... a whole bunch.

02-26-2008, 10:12 PM	#21
69BBsuburban Right in front of you. Join Date: Jan 2006 Location: Roy, Wa Posts: 584	Re: What did you get done? 02/24 SAT- Drove the Hotrod around for awhile with my son, cleaned up the yard, and hung up a few more shelfs in the garage. SUN- Rearranged garage, pulled the hood, grill, and fenders from the Charger, detailed the engine and interior of the '78.... __________________ Pinstriping by Josh '78 Chevy Silverado SWB (lowered, 454) '90 Chevy Sport Truck '68 Dodge Charger R/T 1930 Ford Model A

02-26-2008, 10:59 PM	#22
SSC's76 No No Join Date: Jun 2005 Location: Pueblo Colorado Posts: 1,781	Re: What did you get done? 02/24 Got the engine in the bird and fired her up. She hit right off the bat and ran like a champ. We drove her up to the the mountains for the initial drive. It ran flawlessly. We dident use squat for gas so it seems to be a good little motor not a peppy as I would like but it gets going when the gas goes to the floor. Spent last night towing a friend across town kinda funny when I decided to stomp on the gas and break the tires loose. Sad when you cant get traction at 15 MPH with a fnord probe latched on the back. __________________ 1976 Custom Deluxe SWB Med FMB.3/4 Drop. Gen VI 454, Muncie HD 3 speed With Modified OE Hurst Shifter, 3.73 12 bolt, GMPP HO roller cam, Hooker headers, Performer intake with modified Q-jet, Accel distributor. Best 1/4 12.3 @108. Funnest run 19.84 @88 full 1/4 mile burn out. 1997 K1500 ext cab 5.7 stock except muffler

02-27-2008, 12:49 AM	#23
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: What did you get done? 02/24 Pulled the accessories off the front of the Jimmy to put the serpentine setup on it. Hit the alternator bracket with some polish to see if I wanted to do both of them, decided not to at this time. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

02-27-2008, 01:58 AM	#24
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: What did you get done? 02/24 got me some Martin Bro's 24s... they will end up on my tahoe when I get the motor back in it but I couldn't help but stick em on the Z71... Attached Images __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

Register or Log In To remove these advertisements.