Stepped/dropped A arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 02-18-2008, 07:41 AM

People call em different things dropped or stepped.

These are good for about a 2.5 inch drop. You can keep your drums if you use these. Or you can keep your disks. You can also use lower springs with these. But you can not combine these with dropped spindles. If you have drums now you can convert to disks later by just using a stock disk spindle.

These cost 300 dollars plus shipping when I got them. They are heavy. I would have received 50 dollars back if I shipped them the cores. Unfortunately that time period has lapsed and I missed out.

They have never been installed. You can have them for 225 dollars plus shipping. I dont have any way to weigh them here but Im guessing they must be around 30lbs?

CG · 02-19-2008, 03:10 AM

TTT just once on these.

Longhorn Man · 02-19-2008, 04:32 AM

drooooooooooooolllllll
I'll trade you a ...
awwww crap, the only thing I have that could be traded, is the longhorn... and then you'd be gettin ripped off!

bdydrp97s10 · 02-19-2008, 05:51 AM

just for the record i shipped two a arms to guy, and they weighed 30 lbs a piece.

CG · 02-19-2008, 06:35 AM

Quote:

Originally Posted by bdydrp97s10

just for the record i shipped two a arms to guy, and they weighed 30 lbs a piece.

Wow, I guess I was off a little on my guesstimate. Thanks for the info. Ill work with someone on the shipping if it helps me move them.

N2GMTrux · 02-26-2008, 07:21 AM

Just wondering why can you not combine with a set of 2.5 drop spindles. Will they rub or not turn properly. I'm interested but I have a set off ECE spindles and wanting to get about four and a half to five inch drop. I have a set of stock new springs and with those dropped lowere A-arms that would give me five inches. Any info would be helpful.

Thank You

crews · 02-26-2008, 07:35 AM

Not to hi-jack this FS thread, BUT- When using drop spindles and lowered control arms, the combined drop will result in the wheel interfering with the lower control arm. You can only use a spindle/ spring OR control arm / spring combination.

If I am mistaken, please correct me. It has been a lot of years since I ran my first set of dropped control arms.

CG · 02-28-2008, 11:19 AM

These are sold. crews is correct on why you cant combine dropped spindles and lowered arms.

If anyone else was thinking about these you should PM hotrodhomi, I believe he has a set he isnt using anymore and would like to sell them.

andys70c10 · 02-28-2008, 09:17 PM

I was thinking about getting me some of these, who makes them?

CG · 02-28-2008, 10:16 PM

Like I said above send a PM to hotrodhomi he has a set he wants to sell.

N2GMTrux · 02-29-2008, 05:47 AM

Thank you for the information!!!!!

02-18-2008, 07:41 AM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,985	Stepped/dropped A arms People call em different things dropped or stepped. These are good for about a 2.5 inch drop. You can keep your drums if you use these. Or you can keep your disks. You can also use lower springs with these. But you can not combine these with dropped spindles. If you have drums now you can convert to disks later by just using a stock disk spindle. These cost 300 dollars plus shipping when I got them. They are heavy. I would have received 50 dollars back if I shipped them the cores. Unfortunately that time period has lapsed and I missed out. They have never been installed. You can have them for 225 dollars plus shipping. I dont have any way to weigh them here but Im guessing they must be around 30lbs? Attached Images

02-19-2008, 03:10 AM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,985	Re: Stepped/dropped A arms TTT just once on these.

02-19-2008, 04:32 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Stepped/dropped A arms drooooooooooooolllllll I'll trade you a ... awwww crap, the only thing I have that could be traded, is the longhorn... and then you'd be gettin ripped off!

02-19-2008, 05:51 AM	#4
bdydrp97s10 Registered User Join Date: Dec 2007 Location: Johnson City TN Posts: 570	Re: Stepped/dropped A arms just for the record i shipped two a arms to guy, and they weighed 30 lbs a piece.

02-26-2008, 07:21 AM	#6
N2GMTrux Registered User Join Date: Jan 2007 Location: Fort Worth, TX 76133 Posts: 406	Re: Stepped/dropped A arms Just wondering why can you not combine with a set of 2.5 drop spindles. Will they rub or not turn properly. I'm interested but I have a set off ECE spindles and wanting to get about four and a half to five inch drop. I have a set of stock new springs and with those dropped lowere A-arms that would give me five inches. Any info would be helpful. Thank You __________________ ...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640

02-26-2008, 07:35 AM	#7
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	Re: Stepped/dropped A arms Not to hi-jack this FS thread, BUT- When using drop spindles and lowered control arms, the combined drop will result in the wheel interfering with the lower control arm. You can only use a spindle/ spring OR control arm / spring combination. If I am mistaken, please correct me. It has been a lot of years since I ran my first set of dropped control arms. __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

02-28-2008, 11:19 AM	#8
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,985	Re: Stepped/dropped A arms These are sold. crews is correct on why you cant combine dropped spindles and lowered arms. If anyone else was thinking about these you should PM hotrodhomi, I believe he has a set he isnt using anymore and would like to sell them.

02-28-2008, 09:17 PM	#9
andys70c10 Registered User Join Date: Feb 2008 Location: hamilton, ga Posts: 48	Re: Stepped/dropped A arms I was thinking about getting me some of these, who makes them?

02-28-2008, 10:16 PM	#10
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,985	Re: Stepped/dropped A arms Like I said above send a PM to hotrodhomi he has a set he wants to sell.

02-29-2008, 05:47 AM	#11
N2GMTrux Registered User Join Date: Jan 2007 Location: Fort Worth, TX 76133 Posts: 406	Re: Stepped/dropped A arms Thank you for the information!!!!! __________________ ...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.