72 Blazer parts vehicle - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ron 586** · 03-07-2008, 10:26 AM

Will do Huck. I just found this and it's 11:32 pm. I'll call in the morning. My trailer has a winch so no problem loading. I may have to chance coming alone but it will be better if I can get a partner in crime. Talk to you in the morning.

70rs/ss · 03-08-2008, 05:47 AM

Huck, I still want the single walled top, but no idea when or how I'd get it? LMK

Mike

5150 · 03-08-2008, 08:29 AM

Ron, I'm up for a road trip if you need me. Problem is you'd have to do it by yourself for at least the two hours to get home from my house back to Big Sandy.

**Ron 586** · 03-08-2008, 08:55 AM

Quote:

Originally Posted by 5150

Ron, I'm up for a road trip if you need me. Problem is you'd have to do it by yourself for at least the two hours to get home from my house back to Big Sandy.

What days work for you next week? Huck is tied up with the big show/swap meet this weekend so we agreed to wait until next week. And the storm that is coming in tonight and tomorrow didn't help. Getting to your house and back is not a problem. What works best for you?

5150 · 03-08-2008, 06:48 PM

I'm good after Tuesday of next week. Thursday would be the best after 9:00am. Just let me know.

**Ron 586** · 03-08-2008, 07:56 PM

Quote:

Originally Posted by 5150

I'm good after Tuesday of next week. Thursday would be the best after 9:00am. Just let me know.

I can be at you house on Thursday morning at 9 am. That would put us at Huck's about noon. Load and tie down won't take 30 mins so can be home early depending on the BS session that follows. Does that work for you Huck? If not we'll do something different.

**Ron 586** · 03-15-2008, 09:12 PM

Working on trailer and hope to have it back first of the week. Here are the springs you asked about.

I'll bring them when I come to pick up the Blazer parts.

Huck · 03-15-2008, 11:23 PM

Thursday (3-20-08) around noonish is fine. I will have the little beauty ready to load. Plenty of room to drive in and turn around in the back 40.
Those springs look perfect--just the right matching shade of dirt and rust to blend in with the rest of the truck I'm restoring!!

**Ron 586** · 03-17-2008, 04:26 AM

Happy days are here again. I was just heading out the door to go check on my trailer repair and the phone rang. Eric told me the trailer was ready to go that I could come and get it anytime. I went and hooked it up and headed down the road to make sure it tracked right then went back and loaded the truck he was trying to haul when he wrecked. I brought it home without any problems. So I have contacted Bryon/5150 and we can leave his place north of Nashville around 9:15 to 9:30 and should be at your place around noon +/- an hour. If anything changes just let me know and I'll do the same. Thanks.

**Ron 586** · 03-21-2008, 08:18 AM

Will be up tomorrow to pick up blazer and drop off springs. Might be a little before noon if we have any luck. Will call if I can find your number. See you tomorrow.

**Ron 586** · 03-23-2008, 06:59 AM

I had a long tiring day but it was well worth it. It turned out to be a 660 mile round trip. Thanks Huck for a good deal on the Blazer and for making it such a simple job to pick it up. It was a pleasure to meet another Viet Nam vet and find out that we were in country at the same time (1967) and was in at least 1 operation there but we never met. Thanks Bryon/5150 for doing most of the driving and babysitting the old man. I'm happy to report that the Blazer looks right at home in the outdoor parts department.

LUV2XCLR8 · 03-24-2008, 01:35 AM

Huck · 03-24-2008, 04:58 AM

Ron, just one tip---old rusty trucks look best with just one plant stuck someplace to give just a we bit of beauty! hehehehe
Hope to see you at your board gathering---. Warren

03-07-2008, 10:26 AM	#26
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,166	Re: 72 Blazer parts vehicle Will do Huck. I just found this and it's 11:32 pm. I'll call in the morning. My trailer has a winch so no problem loading. I may have to chance coming alone but it will be better if I can get a partner in crime. Talk to you in the morning. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

03-08-2008, 05:47 AM	#27
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: 72 Blazer parts vehicle Huck, I still want the single walled top, but no idea when or how I'd get it? LMK Mike

03-08-2008, 08:29 AM	#28
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: 72 Blazer parts vehicle Ron, I'm up for a road trip if you need me. Problem is you'd have to do it by yourself for at least the two hours to get home from my house back to Big Sandy. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

03-08-2008, 06:48 PM	#30
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: 72 Blazer parts vehicle I'm good after Tuesday of next week. Thursday would be the best after 9:00am. Just let me know. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

03-15-2008, 09:12 PM	#32
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,166	Re: 72 Blazer parts vehicle Working on trailer and hope to have it back first of the week. Here are the springs you asked about. I'll bring them when I come to pick up the Blazer parts. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

03-15-2008, 11:23 PM	#33
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: 72 Blazer parts vehicle Thursday (3-20-08) around noonish is fine. I will have the little beauty ready to load. Plenty of room to drive in and turn around in the back 40. Those springs look perfect--just the right matching shade of dirt and rust to blend in with the rest of the truck I'm restoring!!

03-17-2008, 04:26 AM	#34
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,166	Re: 72 Blazer parts vehicle Happy days are here again. I was just heading out the door to go check on my trailer repair and the phone rang. Eric told me the trailer was ready to go that I could come and get it anytime. I went and hooked it up and headed down the road to make sure it tracked right then went back and loaded the truck he was trying to haul when he wrecked. I brought it home without any problems. So I have contacted Bryon/5150 and we can leave his place north of Nashville around 9:15 to 9:30 and should be at your place around noon +/- an hour. If anything changes just let me know and I'll do the same. Thanks. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

03-21-2008, 08:18 AM	#35
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,166	Re: 72 Blazer parts vehicle Will be up tomorrow to pick up blazer and drop off springs. Might be a little before noon if we have any luck. Will call if I can find your number. See you tomorrow. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

03-23-2008, 06:59 AM	#36
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,166	Re: 72 Blazer parts vehicle I had a long tiring day but it was well worth it. It turned out to be a 660 mile round trip. Thanks Huck for a good deal on the Blazer and for making it such a simple job to pick it up. It was a pleasure to meet another Viet Nam vet and find out that we were in country at the same time (1967) and was in at least 1 operation there but we never met. Thanks Bryon/5150 for doing most of the driving and babysitting the old man. I'm happy to report that the Blazer looks right at home in the outdoor parts department. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

03-24-2008, 01:35 AM	#37
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: 72 Blazer parts vehicle __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-24-2008, 04:58 AM	#38
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: 72 Blazer parts vehicle Ron, just one tip---old rusty trucks look best with just one plant stuck someplace to give just a we bit of beauty! hehehehe Hope to see you at your board gathering---. Warren



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.