i have a truck vid too! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

79BIG10 · 01-28-2003, 05:11 AM

Took the time to download on dial up and sounds sweet

J-Spec C10 · 01-28-2003, 02:36 PM

Sounds great! What exhaust work do you have done?

MylilBowTie · 01-28-2003, 02:43 PM

Whats the recipe on the engine? Just wondering if its still gotta 305 or what not? I would hope it to be a 350.

low 84 · 01-28-2003, 05:14 PM

thanks for the compliments.

the engine is a 350 4 bolt, bored .06 over, dart iron eagle heads (2.02/1.60 w/200cc intake runners), 10:1 c.r., comp xe 262 cam, wiend intake and eddy carb. but this is only temporary, somthing a little better is going in this summer

the exhuast is dynomax ceramic coated shorty headers w/2.5 inch pipe to two 40 seires flows. and there are no tailpipes, it goes straight out of the mufflers. it had tailpipes but i cut them off because i thought they were hitting the axel.

01-28-2003, 05:11 AM	#26
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Took the time to download on dial up and sounds sweet __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

01-28-2003, 02:36 PM	#27
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	Sounds great! What exhaust work do you have done? __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

01-28-2003, 02:43 PM	#28
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Whats the recipe on the engine? Just wondering if its still gotta 305 or what not? I would hope it to be a 350. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

01-28-2003, 05:14 PM	#29
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	thanks for the compliments. the engine is a 350 4 bolt, bored .06 over, dart iron eagle heads (2.02/1.60 w/200cc intake runners), 10:1 c.r., comp xe 262 cam, wiend intake and eddy carb. but this is only temporary, somthing a little better is going in this summer the exhuast is dynomax ceramic coated shorty headers w/2.5 inch pipe to two 40 seires flows. and there are no tailpipes, it goes straight out of the mufflers. it had tailpipes but i cut them off because i thought they were hitting the axel. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.